Standards Categories
Standards Test Equipment
-
Narda PMM 7010 EMI Test Receiver
SKU: 10025
Frequency Range: 9 kHz to 3 GHzApp Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector functionPre-programmed Test Limits: CISPR 11, CISPR 22Sweep/Test Speed: Slow$495.00 - $2,375.00IN STOCK -
EMI-AK40G Antenna Kit for EMI Radiated Emissions & Immunity Testing
SKU: 12112
Frequency Range: 20 Hz to 40 GHzIncludes: Log, Biconical, Monopole, Passive Loop, Dual Ridge, Quad Ridge, Current ProbesTest Standards: FCC Part 15, MIL-STD-461, IEC 61000-6-3, IEC 61000-6-4Applications: EMC Precompliance Testing, Radiated Emissions, TEMPEST TestingIn Stock -
AE Techron CIS-25 Aviation Conducted/Induced Susceptibility Test Kit
SKU: 45223
Applications: Military EMC Testing, Aerospace, Aircraft And Aviation EMC TestingTest Standards: Airbus ABD0100.1.8, Boeing-D6-36440E, DO160 Section 18, DO160G Section 19, MIL STD 461 CS101, MIL STD 1275E, IEC 61000 4-19Output Current: 0A to 25A continuousBandwidth: Full Signal: DC to 300 kHz; Small Signal: 3Vp-p to 1 MHzOutput Voltage Range: –80V to +80VTypically In Stock -
3cTest SEPN 38100T Surge/EFT 3 Phase Coupling Network
SKU: 7271
EUT Load Capacity (AC): 380V, 100 A, 50 Hz/60 Hz three-phase-five-wireEUT Load Capacity (DC): 450 V, 100 AFuse: 6 AMax Power Consumption: 200 WDimensions: 600 x 800 x 1830 mm (W x D x H) 23.6 x 31.5 x 72 inIn Stock -
Elektro-Automatik PS 11500-30 Programmable High Efficiency DC Power Supply 1500 V
SKU: 7287
Voltage range: 0-1500 VCurrent Range: 0 -30 AResistance Range: 1.7 Ω - 3000 ΩOutput Capacitance: 60 µFFrequency Range: 45 - 65 Hz$1,400.00 - $14,000.00In Stock -
Hioki 3470-02 Magnetic Field Meter, 10 Hz - 400 kHz
SKU: 12076
Frequency Range: 10 Hz - 400 kHzCompliance Standards: IEC62233 and EN 50366Magnetic Measurement Units: Select T (Tesla), G (Gauss) or A/mEMC Standards: EN/IEC 61000-4-8Inquire for Availability -
RESA Realtime EMC Spectrum Analyzer
SKU: 2075
Frequency Range: 9 kHz - 3.2/7.5.13.2/26.5 GHzFrequency Resolusion: 1 HzReal Time Bandwidth: 25 MHz (40 MHz Optional)Range: 0 Hz (Zero Span), 100 Hz to Max FrequencyEMI bandwidth (-6dB): 200 Hz, 9 kHz, 120 kHz, 1 MHz (in accordance to CISPR 16-1-1)In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: 11018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzInquire for Availability -
Rent Keysight N9048B CISPR 16 EMI Receiver
SKU: 22153
Frequency Range: 1 Hz to 26.5 GHzStandards Met: CISPR 16-1-1, ANSI C63.2, FCCCalibration: Accredited ISO 17025Options: See "Installed Options"Applications: Conducted Emissions, Radiated Emissions,IN STOCK -
MIL-STD-461 CS101 Test Equipment Setup Rental Package
SKU: 22047
Test Standards: MIL-STD-461 CS101Frequency Range: 30 Hz to 150 kHz (Extendable down to 2 Hz and up to 500 kHz)Test Setup: Quick Start Guide ProvidedShipping: Same Day, Larger Systems go Freight$975.00 - $1,975.00Usually ships in 24 hours. -
3ctest Automotive EMI Test System
SKU: 11932
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8Max Voltage (w/ Built In CDN): 60 VoltsMax Current (w/ Built In CDN): up to 200 AmpsTypically In Stock -
Lumiloop LSProbe 1.2 Laser Powered Field Probe for CW and Pulse Testing
SKU: 7384
Application/Test Type: Radiated ImmunityField Strength Range: 0.1 V/m to 1,000 V/m (7 to 10 kV/m under 30 MHz)Frequency Range: 10 Hz to 8.2 GHzResolution: <0.01 V/mTest Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Typically In Stock