Standards Categories
Standards
-
Monthly Rental EM Test CWS 500N Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-921
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 Ohms -
ETS-lindgren 3148 200MHz-2GHz Log Periodic Dipole Array Antenna
SKU: 2514
Weight: 2.0 kg (4.5 lb)Connector: Type N femaleFrequency Range: 200 MHz – 2 GHzMaximum Continuous Power: 1 kWVSWR: 1.2:1 average 2.0:1 maximumInquire for Availability -
Com-Power LI-150C Line Impedance Stabilization Network
SKU: sku-890
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair
SKU: sku-881
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Chroma 61704 3-Phase AC Power Source for MIL-STD-704 and RTCA DO-160 Testing
SKU: sku-872
Weight: 71 kg/165.2 lbsCurrent rating: 120 ampsDimensions: 400 x 482 x 600 mm (15.75 x 19 x 24 in)Frequency Range: DC, 15 Hz - 1.2 kHz (.15% accuracy)Output current: 16 Amps RMS (96 Amps Peak) -
3ctest APS Automotive Power Supply Voltage Change Simulator
SKU: 22867
Output Voltage: Configurable from -80 to 80 Volts to as minimal as 40V/0VOutput Current Options: 10A, 30A, 50A, 100AOutput Frequency Bandwidth: up to 300 kHzFeatures: Automatic compensation function for voltage dropPre-Programmed Standards: All sections of ISO 16750-2, ISO 7637-2 Pulse 2B and 4,Most Models In Stock -
Ground Reference Plane for EMC/EMI Testing
SKU: sku-833
Material: Aluminum (Copper upon request)Dimensions: 9' by 6'In Stock -
Teseq CDN S900S RS-232 Coupling Decoupling Network for IEC 61000-4-6
SKU: 10828
Weight: 1.5 kg (3.3 lbs)Application/Test Type: Coupling / decoupling network (CDN) for screened data/telcom lines or coaxial cablesCommon Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 250 mA (CDN ST08 1 Amp)Decoupling of Common Mode Disturbance: 150 kHz: Over 60 dB; 1.5 MHz: Over 60 dB; 30 MHz: Over 50 dB; 230 MHz: Over 40 dB (refer to data sheet for some exceptions)$1,190.00 -
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
SKU: 10827
Associated Equipment: RF Conducted Immunity Test SystemsApplication/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 16 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$195.00 - $495.00Typically In Stock -
3 Phase EFT/Burst, Surge Combination Wave Test System
SKU: 1785
Application/Test Type: CE Marking, EMC Precompliance TestingBurst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Pulse amplitude: 0.2 – 5.0 kVPulse current (short circuit): 0.1 – 2.5 kA ±10% (8 us ±20% risetime)Rentals Ship Today -
EFT-DLC EFT/Burst Capacitive Coupling Clamp for Data Lines
SKU: 1780
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Built in Accordance to: IEC 61000-4-4Coupling Length: 1 m (39.4 in)Compatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)RF Connector: Fischer HV Connector$195.00 - $2,495.00In Stock -
CE Mark Product Package for IEC/EN 61000-4 Series Compliance
SKU: 12854
Applications: CE Marking, EMC Precompliance Testing, Conducted ImmunityHarmonized Standards: IEC/EN 61000-4-4, IEC 61000-4-5, IEC 61000-4-11Industries: Medical DevicesTest Setup: Conducted Immunity/Susceptibility Test SetupPeak inrush current capability: greater than 500 Amps$2,975.00 - $9,500.00IN STOCK