Standards Categories
Standards Test Equipment
-
QRHA40G 18 GHz to 40 GHz Quad Ridge Horn Antenna
SKU: 32052
Frequency Range: 18 - 40 GHzIsotropic Gain: 17 dBiPort Isolation: 30 dBMax RF Input Power: 40 WattsTypically In Stock -
ESA EMI Spectrum Analyzer for Precompliance Testing
SKU: 112048
Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMCPre-programmed Test Limits: FCC Part 15, CISPR 22, and moreMax Frequency: 1 GHz, 3 GHz or 7.5 GHzMin Frequency: 9 kHzSweep/Test Speed: Slow$195.00 - $995.00IN STOCK -
AE Techron 3110A Automotive & Aviation Standards Waveform Generator
SKU: 12046
Rise/Fall Times: ≥ 2 µsOutput Channels: 1AC Power: Single-phase, 120 VAC, 50/60 Hz, 2A service; 230 VAC, 50/60 HzWaveforms Supported: Sine, Ripple, DC, Triangle, Square, Rectangle, SawtoothNumber of Tests: 300,000 (expandable to 1 million)IN STOCK -
EMC/RF Shielded Tent Enclosure - RFT Series
SKU: 12035
Attenuation: 90 dB typicalFrequency Range: (150 kHz) 30 MHz - 18 GHzApplications: EMC Precompliance Testing, Radiated Emissions, Radiated ImmunityStandard Options: Lights and VentEnclosure Size: up to 10ft x 20ft 10ftMost Sizes In Stock -
Com-Power LI-400C 10 kHz - 10 MHz LISN for Mil-STD 461
SKU: 7281
EUT Current Handling: 25 AmpEUT Voltage Handling:: 270 VAC ( Line to Ground ), 380 VDCApplications: Conducted Emissions, Military EMC TestingTest Standards: MIL-STD-461Inductors: 50 μH ( air-core )In Stock -
20 Hz - 18 GHz Radiated Test Antenna Kit
SKU: 30182
Frequency Range: 20 Hz (30 MHz) - 18 GHz (40 GHz)Applications: Military EMC TestingTest Standards: MIL-STD-461, FCC Part 15, TEMPEST TestingAdditional Test Standards: CISPRTypically In Stock -
BA330MEP Portable Emissions Biconical Antenna, 20 MHz - 330 MHz
SKU: 2964
Weight: 4.3 lb's (1.95 kg)Antenna Factor (1 Meter): 8.5 to 21.5 dB/mConnector: N-Type, femaleDimensions: 29" x 52.5" (73.7cm x 134cm)Frequency Range: 20 MHz to 330 MHz -
Teseq NSG 3025 Fast Transient/EFT Generator for IEC/EN 61000-4-4
SKU: 11993
Test Capabilities: Electrical Fast Transient ImmunityStandards Met: IEC/EN 61000-4-4Applications: EMC Precompliance Testing, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage / Current (w/ Built in CDN): 250 Volts, 16 AmpsMax EUT DC Voltage / Current (w/ Built in CDN): 120 Volts, 16 AmpsWas:$9,500.00$7,500.00In Stock -
RF Conducted Immunity Testing to IEC 61000-4-6
SKU: 11955
Injection Methods: BCI probes, EM Clamps, CDN's, ISN's, DPI, TWCRadiation Measurements: V/m, mATest Levels: Up to 50 V/m or 400 mAFrequency Range: (4) 150 kHz - 230 MHz (1 GHz) -
Configurable Radiated Immunity Test Rack
SKU: 10019
Frequency Range: 2 MHz - 40 GHzCW Field Strength Levels (@ 3m): 100V/mCW Field Strength Levels (@ 1m): 200 V/mTest Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Test Setup: Radiated Immunity & SusceptibilityImmediate Shipping Available -
RFCI-MIL Radiated & Magnetic Immunity Generator
SKU: 11915
Application/Test Type: Bulk Current Injection (BCI) Testing, Conducted Susceptibility TestingFrequency Range: 10 kHz - 250 MHzConnectors: EUT Monitors, N type, SMA and BNC, Ethernet, USBStandards Met: IEC 61000-4-39MIL-STD-461 CS114, IEC 60601-1-2AC Power Input: 100 to 240 V 50/60 HzTypically In Stock -
RF/EMI Shielding Effectiveness Testing
SKU: sku-1900
Weight: 26 lbFrequency Range: 95 kHz (Crystal Controlled)Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycleReceiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dBTransmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy