Standards Categories
Standards
-
Schwarzbeck NNBM 8124 Single Path Vehicle AMN (LISN)
SKU: 21133
Applications: Conducted Emissions, BCI Testing , Automotive EV EMCTest Standards: CISPR 25, ISO 7637, MIL-STD-461Max EUT Current: Up to 100 AmpsMax EUT DC Voltage: 1,000 VoltsMax con. current: 70 AmpsTypically In Stock -
3ctest PFS Single Phase Power Fail Simulator
SKU: 21108
EUT max. Voltage: 55V - 300VEUT max. current: 6A - 55ADip Voltage & Variation Levels: 0% through 100%Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: EMC Precompliance Testing, Conducted Immunity4-6 Weeks -
3ctest MFS Series Power Frequency Magnetic Field Simulator
SKU: 17101
- Electronic magnetic relay protection if voltage and current is more than rated value
- Programmable setup for test voltage, polarity and phase sync angle by software to save time
- Programmable pulse intervals, test duration and temperature protection
Continuous Magnetic Field Strength Levels: 1 A/m – 300 A/mInquire for Availability -
Noiseken INS-4020 Impulse Noise Simulator
SKU: 11048
Test Standards: IEC 61000-4-4, MIL-STD-461 CS115Applications: EFT/Burst, EMC Precompliance, BCI TestingPulse Widths: 10ns, 50ns, 100ns, 200ns, 400ns, 500ns, 800ns and 1000nsOutput Voltage: 0.01~2.00kV ±10% with 50Ω LoadEUT Power Handling: AC240V Single phase, DC60V, 16ATypically In Stock -
LFCI4-16/19 Test Generator for Common and Differential Mode Disturbances
SKU: 11995
Test Standards: IEC 61000-4-16, IEC 61000-4-19Frequency Range: DC, 0.05Hz - 300 kHz; resolution 0.05 HzSlew Rate: 100 V/µsInternal Power Amplifier: 250 WattsTypically In Stock -
ETS-lindgren 3148 200MHz-2GHz Log Periodic Dipole Array Antenna
SKU: 2514
Weight: 2.0 kg (4.5 lb)Connector: Type N femaleFrequency Range: 200 MHz – 2 GHzMaximum Continuous Power: 1 kWVSWR: 1.2:1 average 2.0:1 maximumInquire for Availability -
Com-Power LI-150C Line Impedance Stabilization Network
SKU: sku-890
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 50 Amps (AC), 35 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Com-Power LI-125C 150 kHz to 30 MHz Line Impedance Stabilization Network Pair
SKU: sku-881
Weight: 25 lbs. / 11.3 kgApplication/Test Type: Power line conducted emissions testsCurrent Rating: 25 Amps (AC), 17 Amps (DC)Dimensions: 13 x 7 x 7 inches / 33 x 17.7 x 17.7 cmFrequency Range: 150 kHz to 30 MHz -
Chroma 61704 3-Phase AC Power Source for MIL-STD-704 and RTCA DO-160 Testing
SKU: sku-872
Weight: 71 kg/165.2 lbsCurrent rating: 120 ampsDimensions: 400 x 482 x 600 mm (15.75 x 19 x 24 in)Frequency Range: DC, 15 Hz - 1.2 kHz (.15% accuracy)Output current: 16 Amps RMS (96 Amps Peak) -
3ctest APS Automotive Power Supply Voltage Change Simulator
SKU: 22867
Output Voltage: Configurable from -80 to 80 Volts to as minimal as 40V/0VOutput Current Options: 10A, 30A, 50A, 100AOutput Frequency Bandwidth: up to 300 kHzFeatures: Automatic compensation function for voltage dropPre-Programmed Standards: All sections of ISO 16750-2, ISO 7637-2 Pulse 2B and 4,Most Models In Stock -
Ground Reference Plane for EMC/EMI Testing
SKU: sku-833
Material: Aluminum (Copper upon request)Dimensions: 9' by 6'In Stock -
Teseq CDN M016 Switchable 16 Amp Coupling/Decoupling Network
SKU: 10827
Associated Equipment: RF Conducted Immunity Test SystemsApplication/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 ΩCurrent Rating: 16 AmpsDecoupling of Common Mode Disturbance: 150 kHz: Greater than 30 dB 1.5 MHz: Greater than 60 dB 30 MHz: Greater than 40 dB 230 MHz: Greater than 20 dB$395.00Typically In Stock