Rent IFI M33 10 kHz to 230 MHz 35 Watt RF Power Amplifier

IFI M33 10 kHz to 230 MHz 35 Watt RF Power Amplifier


No reviews yet Write a Review
Max Frequency:
230 MHz
Min Frequency:
10 kHz
Output Power:
35 Watts
Applications:
RF Conducted Immunity, Medical
Standards:
IEC 61000-4-6
AC Input Power:
100-240V/1PH/300VA
Gain:
45dB
Manufacturer:
IFI

 

SKU:
sku-467

 

Getting Started...

Check out our Google Reviews

IFI M33 Overview

The IFI M-series RF power amplifiers feature VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection. As well as internal pre-amplification to obtain rated output power with an input level of 0 dBm or less.

[split]

IFI M33 Specifications:

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1, 2.0:1 with full power
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power

IFI M33 Key Considerations

Manufacturer:
IFI
Max Frequency:
230 MHz
Min Frequency:
10 kHz
Output Power:
35 Watts
Applications:
RF Conducted Immunity, Medical
Standards:
IEC 61000-4-6
AC Input Power:
100-240V/1PH/300VA
Gain:
45dB

Related EMC Equipment & Solutions

E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

SKU: sku-844

Connectors: BNC
Cooling: Forced Air
Flatness: ± 1.5 dB
Frequency range: 10 kHz - 12 MHz
Gain: 50 dB nominal
Gain Flatness: +/- 1.5 dB
Input: 104-240 Volts
Input Power for Rated Pout: 0 dBm (1 mW)
Output: 100 Watts P1dB
Protection: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max.
Rated Power: 100 Watts P1dB Compression
RF Input Signal: AM, FM, SSB, Pulsed
RF Input Voltage: 1 mW
$795.00 - $10,950.00
In Stock
ORDERING OPTIONS
E&I / ENI 325LA 25W, 250 kHz - 150 MHz RF Amplifier

E&I / ENI 1020L 10 kHz to 5 MHz 200 Watt RF Power Amplifier

Frequency range: 10 KHz – 5 MHz
Class of Operation: Class AB
Rated Power Output: 200 Watts
Saturated Power Output:  300 Watts
Power Gain: 53 dB nominal
Gain Flatness: +/- 1.5 dB
Input Power for Rated Output: 1.0 mW or 0 dBm
Input Impedance: 50 Ω
Output Impedance: 50 Ω
Ruggedness: Any load VSWR, any phase from open to Short circuit without damage
Front Panel Accuracy: +/- 3% to 2 MHz
Drive Source Requirements: Any signal Generator, function Generator or oscillator capable of up to 0.7 Vpp into 50 Ω
VIEW PRODUCT Cart