Overview
The Keithley 2280S-32-6 programmable DC power supply delivers clean, low-noise output with integrated measurement capabilities, making it suitable for powering and analyzing sensitive electronic devices during laboratory testing. Engineers can monitor voltage, current, and power simultaneously while maintaining stable low-noise output conditions.
With up to 32 V output and 6 A current capability, this instrument is commonly used for testing embedded systems, RF modules, sensors, and other electronic assemblies. The built-in measurement functions and graphical display allow users to observe device behavior during startup, load changes, and long-duration testing.
Standard Accessory Kit:
- Quick Start Guide
- KickStart Quick Start Guide
- LAN Crossover Cable
- Power Cord
- Rear Panel Mating Connector with Cover
At The EMC Shop, instruments such as the Keithley 2280S-32-6 support engineers performing product validation, power analysis, troubleshooting, and automated test development where reliable programmable DC power sources are required.
| Specifications: | |
|---|---|
| Model | Keithley 2280S-32-6 |
| Output Voltage | 0 – 32 V |
| Output Current | 0 – 6 A |
| Maximum Output Power | 192 W |
| Voltage Source Accuracy | ±(0.02% + 3 mV) |
| Voltage Measurement Accuracy | ±(0.02% + 2 mV) |
| Voltage Resolution | 1 mV (source) 0.1 mV (measurement) |
| Current Limit Accuracy | ±(0.05% + 5 mA) |
| Current Resolution | 0.1 mA |
| Output Ripple & Noise | <1 mV RMS <5 mV p-p (20 Hz – 20 MHz) |
| Minimum Pulse Width | 2.1 ms (10 mA / 100 mA range) 140 µs (1 A / 10 A range) |
| Interfaces | LAN, USB, GPIB, Digital I/O |
| Display | 4.3 in color TFT display (480 × 272 pixels) |
| Memory Buffer | 25,000 measurement points |
| Operating Temperature | 0 °C to 40 °C |
| Power Consumption | 630 VA peak |
| Bench Dimensions | 255.3 × 107.2 × 415 mm (10.1 × 4.22 × 16.34 in) |
| Net Weight | 10.85 kg (23.9 lb) |
| Warranty | 3 Years |
