PMM / Narda EMC Test Equipment

PMM / Narda Test Equipment, Systems & Solutions

PMM (Narda) DR-01 Double Ridge Horn Antenna, 6 to 18 GHz

SKU: sku-48

Weight: 250 grams (0.5 Lbs)

3dB Beamwidth (E-Field): 33°

3dB Beamwidth (H-Field): 38°

Antenna Factor (1 Meter): 36 - 41 dB/m

Antennas: Double Ridge Guide Horn Antenna

Application/Test Type: High Frequency, High Power Radiated EMC

Connector: N-Type (male)

Dimensions: 55 x 44 x 137 mm

Frequency Range: 6 GHz to 18 GHz

Gain: 9 - 16 dBi

Impedance: 50  nominal

Maximum Continuous Power: 150 Watts

VSWR: Under 2:1 (1.8:1 typ.)

Inquire for Availability

View Product Cart
PMM (Narda) AS-02 Antenna Set, 30 MHz - 3 GHz, 75 Watts

SKU: 6598

Antenna Factor (1 Meter): -15 +2 dB typical (30 MHz - 200 MHz); 6 dB typical (200 MHz - 3 GHz)

Antennas: Kits & Sets

Application/Test Type: Radiated EMC

Connector: N-Type(female)

Dimensions: 65 x 65 x 137 cm (BC-01); 70 x 10 x 86 cm(LP-02)

Frequency Range: 30 MHz - 200 MHz/200 MHz - 3 GHz

Gain: 8 - 36 dB typical

Impedance: 50 Ω nominal

Maximum Continuous Power: 100 Watts up to 1 GHz (50 watts up to 3 GHz)

Inquire for Lead Time

View Product Cart
PMM L3-64 3-Phase, 64 Amp LISN for FCC Part 15

SKU: sku-57

Weight: 50 kg (110 pounds)

Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.

Current Rating: 63 Amps Max

Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 63 A IEC connector

RF Connector: BNC (f)

Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

Voltage Rating: 230 Volts AC, 325 Volts DC (Line to Power Earth and Neutral to Power Earth); 400 Volts AC, 565 Volts DC (line to line and line to neutral)

CISPR 16-1-2: Yes

DO-160F: Yes

CISPR 22: Yes

FCC: Yes

ANSI C63.4: Yes

View Product Cart
Narda 6002 Power Amplifier 9 kHz - 230 MHz, 10 Watts

SKU: sku-824

Max Frequency: 230 MHz

Min Frequency: 9 kHz

Output Power: 10 Watts

Applications: RF Conducted Immunity, Medical

Standards: IEC 61000-4-6

AC Input Power: 85-264V/1PH/60VA

Gain: 40dB

View Product Cart
PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

SKU: sku-53

Weight: 16.5 kg (40 pounds)

Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz

Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug

Dimensions: 342 x 254 x 510 mm (13.5 x 10 x 20 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector

RF Connector: BNC (f)

Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)

CISPR 16-1-2: Yes

DO-160F: Yes

CISPR 22: Yes

FCC: Yes

ANSI C63.4: Yes

MSRP:

Was:

Price Now:

$5,895.00

Ordering Options
PMM (Narda) RA01 Active Rod Antenna, 9 kHz - 30 MHz

SKU: sku-44

Weight: 1.5 kg (3.3 lbs)

Antenna Factor (1 Meter): + 10 dB (+6dB for 1m monopole effective length normalization

Antennas: Monopole Antennas

Aperture: -

Application/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD and TEMPEST tests

Connector: BNC

Dimensions: Rod: 1 meter by 16 mm diameter; Ground plane: 600 mm x 600 mm; Electronics: 150 mm x 135 mm x 120 mm

Frequency Range: 9 kHz to 30 MHz (RA01); 150 kHz to 30 MHz (RA01HV) frequency range

Impedance: 50 Ohms

Mounting Base: 1/4" c 20 screw

View Product Cart
PMM-9060 EMC/EMI Digital Receiver

SKU: sku-29

View Product Cart