PMM / Narda

(Showing 12 of 31)

PMM is an Italian manufacturer of EMC Test Equipment and is sister companies with Narda Safety Solutions, a manufacturer of safety equipment against RFI and radiation.

Show 12 24

PMM / Narda Test Equipment, Systems & Solutions

  • PMM (Narda) EMR-300 Broadband RF Survey Meter, 3 kHz to 60 GHz

    SKU: sku-611

    Weight: 450 g
    Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
    Battery: 2 ea. AA type, re-chargeable batteries
    Dimensions: 96x64x465 mm
    Frequency Range: varies on probe
    Operation Time: 8 hours (typical)
    Probe Holder Tip: BNC
    Recharging Time: re-charged via supplied charger
    RF Field Probes: E-Field
    Standards Met: IEC/EN 61000-4-3
  • PMM (Narda) 6000N Power Amplifier 9 kHz - 230 MHz, up to 15 W

    SKU: sku-490

    Weight: 4,5 kg
    Amplifiers: Power Amplifiers
    Dimensions: 257 x 115 x 316 mm
    Frequency range: 9 kHz to 230 MHz
    General Data: Technical Details
    Harmonic Distortion (THD): less than -20 dBc
    Operating Temperature: +10 °C to +40 °C
    Signal power: 10 W; 15 W from 150 kHz to 80 MHz
    Supply Voltage: 85 - 264 Vac or 120 - 370 Vdc, 47 - 440 Hz, 60 W
  • PMM (Narda) 6630 USB RF Power Sensor 9 KHz - 3 GHz, 1 W

    SKU: sku-470

    Weight: 0.12 kg
    Dimensions: 30 x 30 x 95 mm
    General Data: Technical Details
    RF Field Probe Connector: N male, 50 Ω
    RF Field Probe Frequency Range: 9 kHz to 3 GHz
    RF Field Probe Max SWR: 10 kHz to 300 kHz 1,10 from +30 dBm to -9 dBm 300 kHz to 100 MHz 1,05 100 MHz to 1 GHz 1,10 1 GHz to 3 GHz 1,25 10 kHz to 3 GHz 1,20 from -9 dBm to -40 dBm
    RF Field Probe Maximum Input Power: 2 W peak envelope max 300 ms
    RF Field Probe Measurement Accuracy: less than 0,35 dB
    RF Field Probe Power Linearity: -40 dBm to +30 dBm @ 50 MHz 0,2 dB
    RF Field Probe Power Measurement Range: 100 nW to 1 W (-40 dBm to +30 dBm)
    RF Field Probes: Power Sensor
    Supply Voltage: 5 Volt DC – 100 mA (from USB Port)
  • PMM (Narda) AS-05 Broadband Antenna Set, 30 MHz - 18 GHz

    SKU: sku-457

    Weight: 1.8/1.1/.25 kg.
    Antenna Factor (1 Meter): 8 to 14 dB/m typical/12 to 40 dB/m typical/36 to 41 dB/m typical
    Antennas: (BC-01, LP-04, DR-01)
    Application/Test Type: Radiated EMC
    Connector: N-Type(female)
    Construction: aluminum
    Dimensions: see description
    Frequency Range: 30 MHz - 200 MHz/200 MHz to 6 GHz/6 to 18 GHz
    Gain: -15 +2 dBi typical/6 dBi typical/9 to 16 dBi typical
    Impedance: 50 Ω nominal
    Max input power: 100/100/150W
    Maximum Continuous Power: 100 Watts up to 1 GHz (75 watts up to 6 GHz)
  • PMM L3-64/690V 690 Volt LISN for IEC 60309, UL1682, UL1686

    SKU: sku-264

    Weight: 50 kg (110 pounds)
    Application/Test Type: Ancillary device intended for repeatable and accurate measurement of the disturbance voltage that an EUT (Equipment Under Test) may inject into the power line or mains.
    Current Rating: 63 Amps Max (IEC60309); 60 Amps Max (UL1682, UL1686)
    Dimensions: 465 x 450 x 740 mm (18 x 17.7 x 29 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
    Mains & EUT Connections: 4P5W connector
    RF Connector: BNC (f)
    Standards Met: IEC 60309; UL1682; UL1686; CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
    Voltage Rating: 400 VAC, 565 VDC (L-PE, N-PE) 690 VAC, 975 VDC (L-L, L-N)
  • PMM (Narda) LP-03 Log Periodic Antenna, 800 MHz - 6 GHz

    SKU: sku-238

    Weight: 0.25 kgs (0.6 LB's)
    Antenna Factor (1 Meter): 23 / 42 dB typical
    Antennas: Log Periodic Antennas
    Application/Test Type: Radiated emissions and immunity
    Connector: Type-N(m) or Type-N(f)
    Dimensions: 18.7 cm x 32.5 cm x 8.1 cm
    Frequency Range: 800 MHz to 6 GHz
    Gain: 3.5 to 6.5 dBi typical
    Impedance: 50 Ω nominal
    Maximum Continuous Power: 75 Watts
    Mounting Base: Tripod adapter, supplied
    Standards Met: IEC 61000-4-6, MIL-STD-461F, DO-160
    VSWR: Less than 1.7:1 typical
  • PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

    SKU: sku-62

    Weight: 248 kg (546 pounds)
    Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuits
    Current Rating: 300 Amps continuous (500 Amps for 20 minutes)
    Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)
    Frequency Range: 9 kHz to 30 MHz
    Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or Bypass
    Input: 230 V - 50/60 Hz, 50 VA each line
    Mains & EUT Connections: M14 bolts
    RF Connector: BNC (f)
    RF Input Voltage: BNC (f)
    Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.