EM Test Equipment Rentals - The EMC Shop

EM Test Categories

EM Test Transient Generators

EM Test Conducted LF/RF Immunity

EM Test ESD Generators

EM Test AC/DC Power Sources

EM Test Test Equipment, Systems & Solutions

EM Test CNV 508 8-Way Surge Coupling Network

SKU: 5575

Applications: Data lines Unshielded, Unsymmetrical Surge Immunity

Test Standards: IEC 61000-4-5

Typically In Stock

VIEW PRODUCT Cart
EM Test Automotive Test System for ISO 7637-2

SKU: 10596

ISO Automotive Standards: ISO 7637-2, ISO 16750-2, ISO 11452-8

SAE Automotive Standards: SAE J1113, SAE J1455

Freestyle Mode Micropulses: Programmable Rise time 1us - 10us in steps of 1us; Pulse duration 50us - 10,000us; Int. resistor 2ohm - 100ohm in steps of 5ohm; 200ohm, 400ohm and 450ohm

Input: DUT supply +/- DC voltage from VDS 200N or any other DC supply; Pulse 5, 7 From one LD 200N

Micropulse: Micropulse module for test pulses 1, 2A and 6

Trigger: automatic, manual, external, battery switch

UCS 200N Models: Built-in coupling/decoupling networks: UCS 200N50, 80V/50A, 100A@500ms; UCS 200N100, 80V/100A, 150A@500ms; UCS 200N150, 80V/150A UCS 200N200 80V/200A

Verification: As per Annex C of ISO 7637-2:2011 into 50ohm and 1,000ohm load

Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

Inquire for availability

VIEW PRODUCT Cart
Em Test CWS 500N1.4 RF Conducted Immunity Test System for IEC 61000-4-6

SKU: 11251

Test Capabilities: RF Conducted Immunity

Standards Met: IEC/EN 61000-4-6

Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & IT

CDN Test Levels (w/ built-in amplifier): 40Vrms

BCI Test Levels (w/ built-in amplifier): 8Vrms

Frequency Range (w/ built-in amplifier): 150 kHz - 230 MHz

Typically In Stock

VIEW PRODUCT Cart
EM Test CWS 500N1.3 10 kHz to 400 MHz Continuous Wave Simulator

SKU: 30163

Output Power: 80 W

Output Impedance: 50 Ω

Max. VSWR: 1:1.2 at all phase angles and at max. power (without destruction)

Harmonic Distortion: < 15dBc

Test Standards: IEC 61000-4-6, IEC 60601-1-2

Applications: RF Conducted Immunity Testing

Inquire for Lead Time

VIEW PRODUCT Cart
EM Test TSS 500M10 Telecom Surge Generator

SKU: 11936

Cost New:

Was:

$48,000.00

Price Now:

$14,400.00

In Stock
EM Test CWS 500N4 Common-Mode Disturbance Simulator for IEC 61000-4-16 & IEC 61000-4-19

SKU: 1254

Weight: Approx. 30kg

Dimensions: 555mm x 448mm x 286mm

Frequency Range: 10Hz to 165kHz

Max input power: 600 Watts

Output: For output characteristics reference data sheet

Supply Voltage: 115V - 230V +10/-15%, 50/60Hz

Inquire for Availability

VIEW PRODUCT Cart
EM Test AIF 503N32.1 3-Phase Flicker Impedance Network

SKU: sku-1917

Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7 and more

Application/Test Type: Medical Device EMC Testing

Built-in Power Analyzer: EM Test DPA 503N

Current Handling: 32 Amps per phase

RENTAL ONLY

VIEW PRODUCT Cart
EM Test Netwave 3.1 Programmable AC/DC Power Source

SKU: sku-748

Frequency Range: DC - 5,000 Hz

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Applications: Flicker and Harmonics Testing

Inquire for Availability

VIEW PRODUCT Cart
EM Test UCS500N7 Multifunctional Transient Immunity Simulator

SKU: sku-241

Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, Dips Interrupts & Variations

EMC Standards: IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11

Test Setup Guides: Electrical Transient and Noise, Surge Immunity, Power Failures

EFT/Burst Pulse Output Capability: ±200 V to 4.8 kV (in 1 V steps) - open circuit±100 V to 2.4 kV ±100 A to 2.2 kA

Combination/Wave Surge Output Capability: 250 V - 6,000 V ± 10%

External Coupling: Data Lines (EFT & Surge), 3PH EUT

Phase synchronization: 0° - 360°, resolution 1° (16 - 500Hz)

Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41

Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

Inquire for Availability

VIEW PRODUCT Cart
EM Test MPG 200 Automotive Micropulse Generator up to 1.1 kV, built in CDN 60V/25A DC

SKU: 11818

Applications: Automotive Electrical Disturbances, EV EMC Testing

Standards Met: ISO 7637

Max EUT DC Voltage (w/ Built In CDN): 60 Volts

Max EUT DC Current (w/ Built In CDN): 25 Amps

Peak Inrush Current Capability: 50 Amps

Pre-Programmed Pulses: ISO 7637-2 (Pulse 1 and 6) "Output=DUT supply +/- Safety laboratory connectors Coupling To the battery +line Decoupling Via diode and battery supply switch DUT supply Max. 60V/25A"

Input: 115/230V +10/-15%

Repetition rate: 300us ± 10% (10 - 10%)

Test voltage: Test Voltage up to 1,100V and GOST PULSE 1B (24V), ISO PULSE 6 (12V/24V)

Cost New:

Was:

Price Now:

$875.00 - $4,500.00

In Stock

ORDERING OPTIONS
EM Test CN 200N1 Audio Transformer Assembly for LF Conducted Immunity Testing

SKU: sku-481

VIEW PRODUCT Cart
EM Test AMP 200N Low Frequency Signal Source DC (0Hz) to 250kHz

SKU: sku-480

Weight: Approx. 18kg

Amplifiers: low-frequency signal source with amplifier

Dimensions: 19", 3HU (500mm x 449mm x 133mm)

Frequency range: DC - 250kHz

General Data: Technical Details

Harmonic Distortion (THD): less than 0.1%

Operating Temperature: 10°C - 40°C

Output current: Max. 5Arms up to 200kHz Max. 4Arms 200kHz - 250kHz

Output Impedance: 30 mOhm @ 1 kHz

Output voltage: 50Vrms, max. 140V(p-p) up to 100kHz 30Vrms 100kHz - 250kHz

Protection: - Short circuit - Overtemperature

Signal power: 250W (nominal)

Supply Voltage: 115 V +10/-02%, 50/60 Hz or 230 V +10/-15%, 50/60 Hz

VIEW PRODUCT Cart