Amplifier Research

(Showing 12 of 113)

EQUIPMENT STOCKED FROM AMPLIFIER RESEARCH

The EMC Shop has the largest rental inventory of AR amps, antennas, field probes and radiated immunity test systems. Contact us for rentals, repairs, calibrations or refurbishment services.

Amplifier Research EMC test equipment in stock. Rentals ship same day

Amplifier Research is now part of Ametek CTS, who launched acquiring solid state amplifier manufacturer Milmega and TWT amplifier manufacturer Instruments for Industry but have since disolved them. The EMC Shop will work on some amplifiers depending on age and issue.

OTHER AMETEK CTS PRODUCT LINES

AMPLIFIER RESEARCH EMCWARE SOFTWARE

Show 12 24 36 48 96

Amplifier Research Categories

Amplifier Research Test Equipment, Systems & Solutions

  • Used Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier

    SKU: sku-529

    Weight: 35 LBs
    Dimensions: 19.8 x 6.1 x 11.80 in
    Flatness: ± 1.5 dB
    Frequency Range: 10 kHz - 250 MHz instantaneously
    Gain: High Range: 61 dB; Low Range: 47 dB
    Impedance: 50 ohms
    Input: 90-135/180-270 VAC 47 to 63 Hz, single phase 200 watts maximum
    Output: Power output @ 3dB compression Nominal 32 watts Minimum 25 watts Power output @ 1 dB compression Nominal 20 watts Minimum 15 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
  • Amplifier Research FI7000 Probe Interface

    SKU: sku-438

    Weight: without enclosure 2.5 kg (6.25 lb) with enclosure 7.25 kg (16 lb)
    Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
    Communication: IEEE-488 (GPIB) USB 2.0, Test and Measurement class RS-232 (19200 Baud) Fiber Optic Serial (19200 Baud) reserved for connection to FM7004A Field Monitor Laser Fiber Optic Serial reserved for connection to one FL/PL 7000 series probe
    Dimensions: without enclosure 48.3 x 4.5 x 25.4 cm (19.0 x 1.75 x 10.0 in) with enclosure 49.8 x 12.7 x 30.5 cm (19.6 x 5.0 x 12.0 in)
    RF Connector: (2) E2000 compact duplex female for probe communication and safety fiber loop (2) FSMA for fiber connection to FM7004A
    Standards Met: IEC/EN 61000-4-3
    Supply Voltage: 90-260 VAC, 50-60 Hz
  • Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz

    SKU: sku-436

    Flatness: ±6 dB maximum at rated power
    Frequency Range: 4-8 GHz instantaneously
    Gain: Max Range: 53 dB; Continous Range: 35 dB
    Impedance: 50 ohms, VSWR 2.0:1 maximum
    Output: Nominal: 262 watts Minimum: 200 watts Linear @ 1 dB Compression: 100 watts minimum
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
  • Amplifier Research 50S1G6 Solid-State Amplifier

    SKU: 2203

    Weight: 62.5 lbs.
    Dimensions: 50.3 x 20.3 x 54.6 cm 19.8 x 8.0 x 21.5 in
    Flatness: Small Signal Flatness:±1.5 dB typical ±2.5 dB maximum
    Frequency Range: 0.7 – 6 GHz
    Impedance: 50 ohms
    Input: Input for Rated Output 1.0 milliwatt maximum
    Output: POWER OUTPUT @ 1dB COMPRESSION Nominal 50 watts Minimum 40 watts
    RF Connector: Type N female
  • SunAR JB1 Broadband Hybrid Antenna, 30 MHz - 2 GHz

    SKU: sku-1895

    Impedance: 50 Ohm
    Weight: approx. 4.2 kg
    Antenna Factor (1 Meter): 7 to 33 dB/m
    Antennas: Bilogical Antennas
    Application/Test Type: RF EMC immunity testing, Improved high frequency gain
    Connector: N type female
    Dimensions: (L x H x W in mm): approx. 1525 X 980 X 410
    Frequency Range: 30 MHz to 3 GHz
    Gain: 6 dB (200 MHz to 3 GHz) / 8 dB (700 MHz to 2.5 GHz)
    Impedance-2: 50 Ω
    Maximum Continuous Power: 300 Watts
    Standards Met: IEC/EN 61000-4-3, CISPR 13, CISPR 14-1, CISPR 16-1-4, CISPR 16-2-3, CISPR 22, CISPR 24, CISPR 32, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, IEC 60533, IEC 60601-1-2, IEC 61326, ISO 11452-2,
    VSWR: 2:1 Average
  • Amplifier Research 15S1G3 RF Power Amplifier

    SKU: 6327

    RF Power Amplifier: 800 MHz to 3 GHz
    Rated Power Output: 15 Watts Minimum
    Input for Rated Output: 1.0 Milliwatt Maximum
    GAIN (at maximum setting): 42 dB minimum
    Input Impedance: 50 ohms
    Output Impedance: 50 ohms, nominal
    1 LEFT

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.