PMM L2-16B Two-line Single Phase V-Network

PMM L2-16B Two-line Single Phase V-Network

Condition:
Used
Frequency Range:
9 kHz to 30 MHz
Standards Met:
CISPR 16-1-2 FCC Part 15
Continuous Rated Output Current:
16 Amps
Maximum Permissible Operating Voltage:
250 VAC; 350 VDC
Equivalent Circuit:
50 Ω // (5 Ω+ 50 μH)
RF Output Connector:
BNC female
EUT connection:
SCHUKO connector
Applications:
Conducted Emissions, BCI Testing , Automotive EV EMC
Manufacturer:
PMM
$295.00

 

SKU:
6763-MO
Availability:

In Stock

Getting Started...

Overview

Rentals Include:

  • Manual
  • Calibration Cert
  • AC Input Cable (USA)

The PMM L2-16B Two-line Single Phase V-Network is a LISN (Line Impedance Stabilization Network) which is capable of generating a maximum output current of 16A. This LISN can be used to measure the conducted noise on the power line of single phase AC and DC powered devices. The L2-16B is designed to perform EMC pre-compliance testing in the frequency range of 9 kHz to 30 MHz. It is also possible to measure more accurately by adjusting the frequency range to 150 kHz to 30 MHz.

The L2-16B has an Artificial hand circuit and has local and remote control via PMM EMI receivers. The LISN should be connected between the EUT (Equipment Under Test) and the power source to accurately measure conducted noise without interference from the power source. The conducted noise can be measured with respect to the Neutral-line and the Phase-line. The L2-16B complies with EMC standards CISPR 16-1-2, VDE 0876 and FCC part 15.

Videos

Key Considerations

Manufacturer:
PMM
Frequency Range:
9 kHz to 30 MHz
Standards Met:
CISPR 16-1-2 FCC Part 15
Continuous Rated Output Current:
16 Amps
Maximum Permissible Operating Voltage:
250 VAC; 350 VDC
Equivalent Circuit:
50 Ω // (5 Ω+ 50 μH)
RF Output Connector:
BNC female
EUT connection:
SCHUKO connector
Applications:
Conducted Emissions, BCI Testing , Automotive EV EMC

Related EMC Equipment & Solutions

PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC - The EMC Shop

PMM L3-32 Four Line 3-Phase LISN w/ V-Network, 32 Amps AC+DC

SKU: 8784

Application/Test Type: Measurement on AC 3-phase power circuits from DC to 60 Hz
Current Rating: 32 Amps with IEC plug; 16 Amps with Schuko plug
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke
Mains & EUT Connections: 32 A IEC connector; 16 A SCHUKO connector
RF Connector: BNC (f)
Standards Met: VDE 0876, CISPR 16-1-2, FCC Part 15
Voltage Rating: 230 Volts AC and 325 Volts DC (Single Phase L-N, L-PE, N-PE and Three Phase L-PE and N-PE); 400 Volts AC and 565 Volts DC (Three Phase L-L, L-N)
Additional Standards Met: DO-160F, CISPR 22, ANSI C63.4
Typically In Stock
View Product Cart
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

SKU: 10062

Weight: 248 kg (546 pounds)
Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuits
Current Rating: 300 Amps continuous (500 Amps for 20 minutes)
Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)
Frequency Range: 9 kHz to 30 MHz
Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or Bypass
Input: 230 V - 50/60 Hz, 50 VA each line
Mains & EUT Connections: M14 bolts
RF Connector: BNC (f)
RF Input Voltage: BNC (f)
Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F
View Product Cart
EM Test (Lüthi) CDN M4 4-Line Coupling/Decoupling Network 3 Phase + Earth/Ground

EM Test (Lüthi) CDN M4 4-Line Coupling/Decoupling Network 3 Phase + Earth/Ground

SKU: sku-144

Application/Test Type: Coupling/decoupling networks for Conducted immunity, mains AC/DC power supply lines
Current Rating: up to 100 Amps
Frequency Range: 150 kHz to 300 MHz (150 kHz - 80 MHz at high current)
Mains & EUT Connections: AE: 4mm safety lab connectors EUT: 4mm safety lab connectors
RF Input Voltage: 30 V (Max)
Standards Met: IEC / EN 61000-4-6
Voltage Rating: up to 750 Volts AC and DC
View Product Cart
Com-Power LI-3P-132 Three-Phase Line Impedance Stabilization Network - The EMC Shop

Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

SKU: sku-598

Weight: 30 lbs.
Application/Test Type: Power Line Conducted Emissions Tests
Current Rating: 32 Amperes
Frequency Range: 150 kHz to 30 MHz
Inductors: 50 µH
Insertion loss: less than 0.7 dB
Isolation: more than 40 dB
Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack
RF Connector: RF Measurement Port 50Ω - N-Type (female)
Standards Met: ANSI C63.4, CISPR 16-1-2
Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V
$450.00
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form