Model PA50G is a broadband benchtop driver amplifier with a typical small signal gain of 25 dB and a nominal P1dB of +18 dBm across the frequency range of 10 MHz to 50 GHz. The power supply required is a single phase AC voltage in the range of 100 to 240 VAC, which can be supplied by a wall outlet. The LED light helps to indicate the working status of the amplifier. The input and output port configurations are both female K connectors.

PA50G Millimeter-wave Low Noise Amplifier Features:

Runs on standard 120VAC (up to 240V for international use)
Suitable for millimeter wave emissions and system performance improvement
Frequency Range of 10 MHz to 50 GHz
Low Noise Figure: 6 dB
Gain: 25 dB typical
Output Power: + 18 dBm @ 1 dB compression
2.4 mm (F) Connectors

Videos

Equipment Specifications

Application/Test Type:

Overcome attenuation problems at higher frequencies.

Connector:

2.4mm(f) to 2.4mm(f)

Frequency Range:

10 MHz - 50 GHz

Gain:

25 dB typical

Related EMC Equipment & Solutions

Com-Power PAM-118A High Gain EMC Broadband Preamplifier, 500 MHz - 18 GHz, 40 dB Gain

SKU: sku-217

Weight: 2.5 lbs (1.1 3Kg)

Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals. It also provides input isolation to your spectrum analyzer or receiver.

Connector: 50Ω Precision N-type (female)

Dimensions: 7.7 x 6.5 x 3.2 inches (184 x 156 x 77 mm)

Frequency Range: 500 MHz - 18 GHz

Gain: 40 dB typical (± 2.5 dB flatness)

Input: 15 VDC, 500 mA

Maximum Continuous Power: +102dBm @ 1 dB compression

RF Input Voltage: 0 Vdc (max)

VSWR: 2.2:1 maximum

View Product View Product

PA40G Millimeter-Wave Low Noise Amplifier

SKU: sku-1888

Max Frequency: 40 GHz

Min Frequency: 10 MHz

Output Power: +18 dBm (P1dB)

Gain: 40 dB typical

Max RF Input Power: +6 dBm @ 1 dB compression

AC Input Power: 100/220 VAC regulated P/Soutput: 12 VDC 170 mA

Interfaces: 2.9mm(f)

$495.00

IN STOCK

Ordering Options

Com-Power PAP-501 EMC Preamplifier, 10 MHz - 1000 MHz, 21 dB Gain

SKU: sku-368

Weight: 1 lb. (0.45 kg)

Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements

Dimensions: 83 x 42 x 25 mm (3.27 " x 1.65" x 0.985")

Flatness: ± 2 dB

Frequency Range: 10 MHz - 1000 MHz

Gain: 21 dB

Input: Max Input: 2 VDC, +10 dBm

Maximum Continuous Power: 6 VDC, 0.5 A

View Product

Com-Power PAM-840A Ultra Wideband Preamplifier, 18 GHz- 40 GHz, 37 dB Gain

SKU: sku-214

Weight: 2.5 lbs (1.1 3Kg)

Connector: 50Ω 2.9mm female

Dimensions: 7.6 x 5.95 x 2.17 inches (192 x 151 x 55 mm)

Frequency Range: 18 GHz - 40 GHz

Gain: 42 dB typical (± 2 dB flatness)

Input: +15Vdc, 500 mA

Maximum Continuous Power: +10 dBm @ 1 dB compression

VSWR: 2.25:1 maximum

View Product View Product

SS6G-50 800 MHz - 6 GHz, 50 Watt RF Amplifier for IEC 61000-4-3

SKU: sku-2228

Max Frequency: 6 GHz

Min Frequency: 800 MHz

Output Power: 50 Watts

Applications: Radiated Immunity, Automotive, Medical

Standards: IEC 61000-4-3

Gain: 47 dB

AC Input Power: 220V/1PH