Haefely PIM 110 Overview
The EMC Shop stocks ring wave immunity systems by Haefely and other manufacturers. Contact us for more ordering and price information.
Application:
|
Haefely PIM 110 System Includes:
|
Benefits:
International application –Specifically designed to meet and exceed the requirements of IEC, EN, and ANSI tests for power line applications.
Accurate Impulse Synchronisation – The PIM 110 impulses can be applied to the AC power wave with ± 1° accuracy.
Safe and Easy – The interlocked HV section and the integrated controller allow your operators to test safely and easily.
Sturdy and Reliable – Careful component selection ensures that the PIM 110 will continue to operate under the most strenuous testing regime.
Report Generation – The unit can automatically generate test reports without a computer. Add WinFEAT&R control and reporting software to collect and collate data in any format you like.
Perform tests as you really want – Because the EUT requires a CDN to enable coupling of the Surge impul se, PIM 110 pulses are guaranteed to be within the stand ard specification at the point where an EUT connects to the test system
IEC 61000-4-12 and ANSI C62.41 describe a Ring Wave generator for application on power lines in a protected environment. ANSI C62.41 specifies the ring wave for testing products situated in Location C ategory A and B. The standard differentiates between the two categories by detailing different effective impedan ces of 30 and 12 ohms respectively. IEC 61000-4-12 applies th e same criteria as ANSI but adds a 200 ohm source impedance and includes the testing of input/output ports. Safety is paramount with surge impulses.
The Haefely PIM 110 High Voltage connections are all linked into the System Safety Concept which prevents high voltage plugs or cables from exposing operators to potentially lethal voltages. This concept is extended to Coupling/Decoupling Networks (CDNs) connected to the PIM 110 output. PIM 110 as part of the PSURGE 8000 Surge Platform System can be used together with Coupling/Decoupling Networks (CDNs) for superimposition of the impulse on AC and DC power lines. Single and three phase CDNs have multiplexed inputs, allowing up to 3 impulse modules to be connected. A full suite of test impulses can then be performed completely automatically and without the need to power down and reconnect the EUT. PSURGE 8000 Surge Platform can perform all the programming functions required to perform IEC and ANSI testing without the need of a control computer. Voltage and Current monitor circuits enable quick and easy verification of the impulse shape and amplitude. In addition, peak measurement circuits are used to help determine EUT PASS/FAIL criterion.
