Overview
This simulator is to produce steep pulse interference produced by on and off inductance load to assess the temporary conducted immunity performance of electronic equipment. It is most widely used for internal immunity performance test, radiated performance test of local part and system ground performance test.
| Item | INS-40A | INS-40B | |
| Pulse width | Rectangle pulse 50ns~1000ns(50ns adjustable for each step) | ||
| Output pulse voltage(continuously adjust) | Rectangle pulse open circuit voltage: 0.25~4kV 50Ω load 0.25~2kV | ||
| Output pulse polarity | +/- | ||
| Rise time | Less than rectangle wave 1ns | ||
| Pulse repeat frequency | Internal variable frequency trigger | Approx. 20~50Hz | |
| Pulse injection angle | 0°~359° continuous adjustable for mains sync | ||
| Mains capacity of DUT | AC single phase 220V, 16A | AC internal three-phase four-wire, 380V 16A | |
| Power supply | AC220V 50/60Hz | ||
| Temperature | 15~35°C,45%~75% RH(no condensation) | ||
| Dimension ?length×width×height? | 491×460×230mm | ||
| Weight | Approx. 36kg | Approx. 37kg | |
