Overview
The charged line potential of the Model 9355-1 is adjustable from less than 10 V to approximately 1900 V. The repetition rate is variable from less than 1.0 pulse per second to 120 pulse per second, or single pulses manually triggered by a panel mounted pushbutton. Digital displays monitor the charging voltage and pulse repetition rate. This unit can also be used as an impulse calibrator to provide an adjustable spectral output up to 150 dB V/MHz over the frequency range of 1 KHz to 10 MHz constant within +1 dB.
Application
The Solar 9355-1 Pulse Generator is designed to provide impulse excitation by means of an injection probe placed around interconnecting cables or power wires. The unit uses a charged transmission line (50 Ω) to generate a pulse with less than 2 nS rise and fall time, and duration of approximately 35 nS, calibrated in a 50 Ω fixture to deliver up to 5 A at a rate of 30 pulse per second for one minute as required by MIL-STD-461D/E/F/G, Test Method CS115.
[split]
| SPECIFICATIONS | |
| OUTPUT PULSE | |
| Charging Voltage | Adj. from 0 to 2000 volts |
| Rise/Fall Time | <2 ns |
| Duration Time | 35 nanoseconds |
| Pulse Repetition Rate | 0.6 p.p.s. to 150 p.p.s. |
| Polarity | selectable |
| Output Load | 50 ± j 0 ohms |
| SPECTRAL OUTPUT | |
| Frequency Range | 1 KHz to 10 MHz |
| Output Level into 50Ω | Up to 150 dB V/MHz |
| Output Flatness | ±1 dB |
| Dimensions | 12.25" wide x 8.7" high x 13" deep (31.1 cm x 21.1 cm x 33.0 cm) |
| Weight | 27 pounds (12.24 kg) |
| Shipping weight | 30 pounds (13.60 kg) |
