Overview
The 3ctest APGxx Series can be used as battery supply simulation and DC voltage source. During test in test lab, APGxx series can replace vehicle battery. Pulse 2b, Pulse 4, slow sine wave noise and other complicated voltage variation test can be conducted by APGxx series simulator.
It is a cost-effective way to replace APSxx series for slow waveforms or high current condition. It can simulate multiple battery supply waveforms as per international standards and multiple automotive manufacture standards. Also, as a powerful DC source, it can be supply power for DUT during automotive transient pulse test, which can meet 42V, 24V and 12V supply voltage. For different models and test applications, the test voltage is up to 60V and current is up to 300A.
As per
- ISO 7637-2
- ISO 16750-2
- BMW 600 13.0 (T1)
- BMW 600 13.0 (T2)
- BMW GS 95002 (2010)
- BMW GS 95003-2
- BMW GS 95024-2-1 2010
- GMW3172 July 2010
- GMW3172 June 2015
- VW TL82066 2006-11
- VW 80000 2013-06
- Peugeot B21 7110 July 2008
- Peugeot B21 7110 July 2005
- Ford EMC-CS-2009rev1
- Ford ES-XW7T-1A278-AC Oct 2003
- Volvo STD 515-0003 2008
- SMTC 3800001 2014
- MBN 10284-4 2011
- MBN 10 284-2 2008
- Mazda MES PW 67600
- JEELY J7110982A 2016
- QFPT2800001 2011
- FIAT 7-Z0441
- FIAT 7-Z0444 April 2008
| Technical Parameters | |||
| Output voltage | 0-60V | ||
| Voltage resolution | ±0.2V | ||
| Output current | Max.400A 500ms | ||
| Source impedance | <10mΩ | ||
| Voltage deviation | <1v(resistive load?including impulse current)?recover to 63% of max. amplitude during 100us | ||
| Voltage fluctuation | Ur < 0.2V pp?min. frequency: 400Hz | ||
| Rise time | < 100us(resistive load ) | ||
| Sine signal output | Frequency up to 30kHz (as per Vpp and output current of waveform) output DUT supply: high current connector | ||
| Serial port | LAN Ethernet RJ45 | ||
| Supply voltage* | AC 220V ?10% 45-65Hz | ||
| Auxiliary power supply voltage | AC 380V*3 ?10%?22U?35U? | ||
| * Please indicate when ordering power supply for different areas | |||
| Temperature | 15 - 35°C | ||
| Relative Humidity | 35%-85%RH(no condensation) | ||
| Software (Optional) | Control software AUTO Lab With PC installed WIN XP and WIN7, it can be easily operated to make the measurement, based on the customized test program. It can identify any device for AUTO Lab test with automatic configuration. It can easily generate test reports. | ||
| Models Selection | |||
| Model | Parameters | Size | |
| APG40C40 | Rated 40V, 40A max? 60A 500ms | 19inch/8U | |
| APG40C60.1 | Rated 40V, 60A max? 60A continuous | 19 inch /8U | |
| APG40C60.2 | Rated 40V?60A max? 120A 500ms | 19 inch /22U | |
| APG40C60.3 | Rated 40V, 60A max? 160A 500ms | 19 inch /22U | |
| • The maximum current 400A can be continuous with the customized voltage 40V | |||
| APG60C40 | Rated 60V, 40A max? 80A 500ms | 19 inch /22U | |
| APG60C60 | Rated 60V, 60A max? 80A 500ms | 19 inch /22U | |
| APG60C80 | Rated 60V,80A max? 150A 500ms | 19 inch /22U | |
| APG60C100 | Rated 60V, 100A continuous | 19 inch /22U | |
| APG60C100.1 | Rated 60V, 100A max?150A 500ms | 19 inch /22U | |
| APG60C100.2 | Rated 60V, 100A max?200A 500ms | 19 inch /22U | |
| APG60C200 | Rated 60V, 200A continuous | 19 inch /22U | |
| APG60C300 | Rated 60V, 300A continuous | 19 inch /35U | |
| • The maximum current 400A can be continuous with the customized voltage 60V | |||
| Basic Equipment | |||
| Simulator, test cable, power cord, fuse, factory test report, warranty report and user manual | |||
