Tekbox TBLDS1 Pre-Compliance Load Dump Simulator - Side View

Tekbox TBLDS1 Pre-Compliance Load Dump Simulator

Condition:
New
Manufacturer:
Tekbox
Rise time:
Adjustable; typ. 100 µs – 10 ms
Fall time:
Adjustable; typ. 700 ms – 1s
Pulse:
Single Pulse or Five Pulses at 10-second intervals
Ri:
2 Ohm
EUT current:
3 A Max. in a 12 V System; 1.5 A Max. in a 24 V System
EUT voltage:
External Power Supply Required; +14 V or +28 V
Transient supply:
External Power Supply Required; +230 V max.
TBLDS1 supply:
internal galvanically isolated supply, powered via USB-C port note: USB-C supply not included

 

No reviews yet Write a Review
Availability:

Inquire for Availability

SKU:
251211-3

 

 

Due to tariff increases, some items in our catalog are subject to additional costs when purchased.

Getting Started...

Check out our Google Reviews

Overview

The Tekbox TBLDS1 is a Pre-Compliance Load Dump Simulator designed to generate automotive load dump pulses according to ISO 7637-2, ISO 16750-2, and SAE J2139. These standards define some of the most severe electrical transients that automotive electronic systems must be able to withstand without damage.

The TBLDS1 provides an affordable solution for design engineers who need to evaluate the robustness of their circuits without investing in full standard-compliant load dump generators. It enables early-stage testing to ensure that electronic designs are prepared for submission to accredited test laboratories.

Key Considerations

Manufacturer:
Tekbox
Rise time:
Adjustable; typ. 100 µs – 10 ms
Fall time:
Adjustable; typ. 700 ms – 1s
Pulse:
Single Pulse or Five Pulses at 10-second intervals
Ri:
2 Ohm
EUT current:
3 A Max. in a 12 V System; 1.5 A Max. in a 24 V System
EUT voltage:
External Power Supply Required; +14 V or +28 V
Transient supply:
External Power Supply Required; +230 V max.
TBLDS1 supply:
internal galvanically isolated supply, powered via USB-C port note: USB-C supply not included

Related EMC Equipment & Solutions

Teseq LD 5550 Load Dump Generator - The EMC Shop

Teseq LD 5550 Load Dump Generator

SKU: LD 5550

Pulse amplitude: 20 to 200 V in 0.1 V steps ±5%
Clamping: 10 to 100 V ±5%, Pulse 5b overshoot typ. <2%/2V
Impedance (Ri): 0.5 to 10Ω in 0.25Ω steps; 30.5Ω, 40Ω ±10%
Pulse Repetition: 15 to 600 s in 0.1 s steps, pulse repetition depends on pulse energy
Pulse Modes: Single, continuous, programmed 1 to 9,999
Inquire for Availability
VIEW PRODUCT Cart
Tekbox TBMR-110M High Speed EMI-Analyzer - Front View with display Panel, Controls and RF input connectors

Tekbox TBMR-110M High Speed EMI-Analyzer DC - 110 MHz

SKU: 251211-1

  • CISPR-16, ANSI and MIL-STD compliant detectors
  • – 162 dBm/Hz noise floor down to 1 kHz
  • Numerous predefined standards and setups, Direct fast compliant STFFT measurement
  • Integrated spectrum analyzer, tracking generator, noise analyzer, harmonics analyzer, IQ stream generator and oscilloscope
Inquire for Availability
VIEW PRODUCT Cart
Tekbox EMCView Elecromagnetic Compatibility Testing Software

Tekbox EMCView Elecromagnetic Compatibility Testing Software

SKU: 54558

System Requirements: NI VISA and Windows 8, Windows 10 and Windows 11
Applications: Automated conducted or radiated noise measurements
Test Configuration: Limit lines, Test Segments, LISN, Antenna and Cable correstion files
Capabilities: Quasi-Peak, pre scan, harmonic markers, automated test reports and more
Pre-Programmed Automated Test Standards: FCC Part 15B, MIL-STD-461, DO-160, CISPR 16, CISPR 25 and more.
IN STOCK
VIEW PRODUCT Cart