RF Power Amplifiers

(Showing 12 of 143)

RENTING RF POWER AMPLIFIERS

The EMC Shop stocks a variety of broadband RF power amplifiers, primarily for EMC testing. Our inventory containts current, solid state technology up to 40 GHz and boasts the smallest amplifiers for convenient transport. Traveling Wave Tube (TWT) Amplifiers for military EMC and RF immunity are also in stock. Efficiently meet the test levels of any radiated immunity and susceptibility test standard.

Rent RF Power Amplifiers - Ship Same Day

EMC AMPLIFIER APPLICATIONS

  • IEC 61000-4-3 - Can be completed with two solid state amps
  • MIL-STD 461 RS103 - 100W solid state from 6 to 18 GHz coupled with a High Gain Horn to achieve 200V/m. Solid State 40 Watt amps to 40 GHz available.
  • IEC 61000-4-6 - One solid state amp up to 1 GHz (dual band)
  • DO-160 Section 20 - One solid state EMC amp
  • Automotive - CW and Pulse solid state amps under 6 GHz
  • Pulsed RF Power Ampifiers

RESOURCES

OTHER RF AMPLIFIER APPLICATIONS

  • Electronic Warfare
  • Communications
  • Radar Testing

RF Amplifiers Selection Chart
0-3 kHz 10 kHz 100 MHz 250 MHz 500 MHz 1 GHz 2 GHz 4 GHz 6 GHz 10 GHz 20 GHz 40 GHz
                  18 GHz - 40 GHz
                6 GHz - 18 GHz  
            2 GHz - 8 GHz      
          1 GHz - 6 GHz        
          1 - 2 GHz            
        700 MHz - 4.2 GHz          
    80 MHz - 1 GHz              
  10 kHz - 1 GHz              
  10 kHz - 400 MHz                
  10 kHz - 250 MHz                  
DC - 300 kHz                    

ONLINE RF POWER AMPLIFIER RENTALS

Rent Keysight N9048B CISPR 16 EMI Receiver

Sold out

/month

Rent Keysight N9048B CISPR 16 EMI Receiver

Sold out

/month

Rent Keysight N9048B CISPR 16 EMI Receiver

Sold out

/month

Rent Keysight N9048B CISPR 16 EMI Receiver

Sold out

/month

Show 12 24 36 48 96

RF Power Amplifiers Categories

DC/Low Frequency High Power Amplifiers
DC/Low Frequency High Power Amplifiers
Solid State High Power Amplifiers
Solid State High Power Amplifiers
Microwave Power Amplifiers
Microwave Power Amplifiers
TWT Power Amplifiers
TWT Power Amplifiers
High Power Pulse Amplifiers
High Power Pulse Amplifiers

RF Power Amplifiers Test Equipment, Systems & Solutions

  • Logimetrics A600/C 4 to 8 GHz, 200 Watt TWT RF Amplifier

    Logimetrics A600/C 4 to 8 GHz, 200 Watt TWT RF Amplifier

    SKU: 11055

    Frequency range: 4.0 GHz - 8.0 GHz
    Gain: 40 dB
    Impedance: 50 ohms, VSWR 2.5:1 maximum
    Input Connector: Type "N" to 8 GHz, Type "SMA" above 8 GHz
    Input/Output Impedance: 50 ohms, VSWR 2.5:1 maximum
    Max NF: 37 dB
    Min. Power: 200 W
    Output Connector: Type "N" to 8 GHz, Waveguide above 8 GHz
    Power: 220 VAC, 50 to 60 Hz, 3-Phase, 2.6 kW.
    Spurious AM Residual AM: At least 40 dB below rated output, typically 46 dB
    $7,500.00
    In Stock
  • E&I / ENI 2200L Class A Linear RF Power Amplifier

    E&I / ENI 2200L Class A Linear RF Power Amplifier

    SKU: 0725

    AC Input: 104 – 240 Volts 8.4 A @ 120 V4.2 A @ 240 V
    Frequency range: 10 KHz to 12 MHz
    Gain: 53 dB (nominal)
    Gain Flatness: +/- 1.5 dB
    Input Power for Rated Pout: 1 mW
    Output Impedance: 50Ω / 2:1 maximum
    Protection: Input: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max. and infinite load VSWR.
    Rated Power Output: 200 Watts (P1dB)
    Applications: Radiated Immunity
    $995.00 - $12,750.00
    In Stock
    ORDERING OPTIONS
  • 3ctest APS 40C10 DC Transient Pulse Simulator for Automotive ISO 7637-2 Pulse 2B/4

    3ctest APS 40C10 Automotive Battery & Pulse Simulator

    SKU: 22867

    Output Voltage: -40 to 40 Volts (.2V steps)
    Output Current: -30 to 30 Amps
    Frequency Range: up to 300 kHz
    Bandwidth Response: 100 kHz
    Pre-Programmed Standards: All sections of ISO 16750-2, ISO 7637-2 Pulse 2B and 4,
    Application: Automotive EMC Testing
    Additonal Test Capabilities: Magnetic Field Immunity acc. to Ford EMC-CS-2009, GMW3172, VW 80000, MBN 10284-4 and more
    IN STOCK
    VIEW PRODUCT Cart
  • E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

    E&I / ENI 2100L RF Power Amplifier 10 kHz - 12 MHz, 100 Watts

    SKU: sku-844

    Connectors: BNC
    Cooling: Forced Air
    Flatness: ± 1.5 dB
    Frequency range: 10 kHz - 12 MHz
    Gain: 50 dB nominal
    Gain Flatness: +/- 1.5 dB
    Input: 104-240 Volts
    Input Power for Rated Pout: 0 dBm (1 mW)
    Output: 100 Watts P1dB
    Protection: Unit will withstand input signal of +13 dBm without damage (1.0 V rms) max.
    Rated Power: 100 Watts P1dB Compression
    RF Input Signal: AM, FM, SSB, Pulsed
    RF Input Voltage: 1 mW
    $795.00 - $10,950.00
    In Stock
    ORDERING OPTIONS
  • A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

    A.R. 500A100A Solid State RF Amplifier, 500 Watts CW, 10 kHz - 100 MHz

    SKU: sku-775

    Weight: 150 lbs
    Dimensions: 19.8 x 16.8 x 21.7 in
    Flatness: .± 1.5 dB maximum ± 0.5 dB with internal leveling
    Frequency Range: 10 kHz - 100 MHz
    Gain: GAIN (at maximum setting).........57 dB minimum GAIN ADJUSTMENT (continuous range)....25 dB minimum
    Impedance: 50 ohms
    Input: 180 - 264 VAC 47 - 440 Hz, 2000 watts maximum @ 0.99 P.F. typical
    Output: POWER OUTPUT, CW Nominal .... 617 watts Minimum...... 500 watts Linear @ 1 dB compression .. 300 watts minimum
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Inquire for Availability
    VIEW PRODUCT Cart
  • A.R. 3500A100 RF Amplifier for RS103 Testing up to 100 MHz

    A.R. 3500A100 High Power RF Amplifier

    SKU: sku-741

    Weight: 900 lbs.
    Dimensions: 22.1 x 60.0 x 39.4 in
    Flatness: ± 1.5 dB maximum ± 0.5 dB with internal leveling
    Frequency Range: 10 kHz - 100 MHz instantaneously
    Gain: 66 dB minimum
    Impedance: 50 ohms
    Input: 180-267 VAC Delta (4 wire) 360-435 VAC, Wye (5 wire) (user must specify) 47-63Hz, 3 phase 15,000 watts maximum at .99 P.F. typical
    Output: POWER OUTPUT @ 3 dB COMPRESSION Typical.... 3000 watts Minimum .. 2700 watts POWER OUTPUT @ 1 dB COMPRESSION Typical...... 2500 watts Minimum ... 2000 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    Inquire for Lead time
    VIEW PRODUCT Cart
  • Amplifier Research 100S1G4M1 Solid-state Amplifier, 100 Watts CW, 0.8-4.2 GHz

    Amplifier Research 100S1G4M1 Solid-state Amplifier, 100 Watts CW, 0.8-4.2 GHz

    SKU: sku-739

    Weight: 190 lbs.
    Dimensions: 19.8 x 18.5 x 24.0in
    Flatness: FLATNESS............... ±1.5 dB typical ........................ ±2.0 dB maximum .......... ± 1dB with Internal Leveling
    Frequency Range: 0.8 – 4.2 GHz
    Gain: GAIN (at maximum setting)... 50 dB minimum GAIN ADJUSTMENT ........ (Continuous Range) .....15 dB minimum . (4096 steps remote)
    Impedance: 50 ohms
    Input: 99-260 VAC
    Output: POWER OUTPUT @ 3dB COMPRESSSION Nominal....... 120 watts Minimum ........... 90 watts POWER OUTPUT @ 1dB COMPRESSION Nominal............. 100 watts Minimum ...... 70 watts
    RF Connector: Type N female
    RF Input Voltage: 1.0 milliwatt maximum for rated output
    VIEW PRODUCT Cart