Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

Teseq (Schaffner) AMZ 41 CISPR 14 Absorbing Clamp for Measuring Power Disturbances

Condition:
Used
Frequency Range:
30 MHz to 1000 MHz
Min. Site Attenuation:
13 dB to 22 dB
Clamp Factor:
-4 dB to +5 dB
Decoupling factor DF:
>21 dB
Decoupling factor DR:
>30 dB
Applications:
Conducted Emissions, Radiated Emissions
Test Standards:
CISPR 16-1-3, CISPR 16-2-2
Manufacturer:
Teseq
$4,965.00

 

SKU:
6861
Availability:

In Stock

Getting Started...

Videos

Teseq (Schaffner) AMZ 41 Key Considerations

Manufacturer:
Teseq
Frequency Range:
30 MHz to 1000 MHz
Min. Site Attenuation:
13 dB to 22 dB
Clamp Factor:
-4 dB to +5 dB
Decoupling factor DF:
>21 dB
Decoupling factor DR:
>30 dB
Applications:
Conducted Emissions, Radiated Emissions
Test Standards:
CISPR 16-1-3, CISPR 16-2-2

Related EMC Equipment & Solutions

Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable - The EMC Shop

Teseq AMZ 41A Absorbing Clamp for CISPR 13 & 14, w/ LE 210 RF Cable

SKU: 30080

Weight: approx. 7 kg
Application/Test Type: Disturbance power measurements of coaxial cables, automotive screened components (eg motor ignition systems and sheath current on aerial cables.
Clamp factor (CF): -4 dB to +5 dB
Current Rating: 25 Amps Max
Decoupling factor DF: Greater than 21 dB
Decoupling factor DR: Greater than 30 dB
Dimensions: W x D x H: 665 mm x 120 mm x 105 mm
Frequency Range: 30 MHz to 1000 MHz
Isolated lines under test: Power supply lines and other connecting lines
Max. Cable Diameter: 20 mm inner (10 mm with adapter)
Maximum Continuous Power: 10 Watts
Min. site attenuation: 13 dB to 22 dB
RF Connector: BNC, 50 Ω
Standards Met: CISPR 13, CISPR 14-1, CISPR 16-1-5, CISPR 16-2-2
Inquire for Lead Time
View Product Cart
Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

Schwarzbeck MDS 21 CISPR 16 Absorbing Clamp

SKU: 11781

Max Cable Diameter: 20mm
Max Current Handling: 30 Amps
Max RF Power Handling: 5 Watts
Frequency Range: 30 MHz - 1 GHz
Test Standards: CISPR 16
Cost New:
$4,950.00
Was:
$4,950.00
$3,500.00
In Stock
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

SKU: sku-119

Weight: approx. 7 kg
Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling
Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)
Connector: N-type female
Dimensions: 647 mm x 130 mm x 105 mm
Frequency Range: 10 kHz to 1000 MHz
Impedance: 50 Ohms
Max. Cable Diameter: 20 mm
Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min
Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326
View Product Cart
Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

Teseq CDN M216 1kV CDN for CISPR 16-1-2, CISPR 16-2-1 and CISPR 15

SKU: sku-86

Weight: 700 grams (1.5 LB.'s)
Application/Test Type: Emission measurement (CDNE) to measure disturbance voltages in the 30 to 300 MHz frequency range.
Common Mode Impedance: 150 Ω +10/-20 Ω
Current Rating: 10 Amps Maximum
Decoupling of Common Mode Disturbance: Greater than 30 dB
Dimensions: 4.1 x 3 x 5 inches (10.5 x 7.5 x 12.5 cm)
Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)
Insertion Loss: Greater than 0.1 dB
Mains & EUT Connections: 4 mm, safety
RF Connector: BNC, 50 Ω
RF Input Voltage: Less than 30 V
Standards Met: IEC 61000-4-6, CISPR 16-1-2, CISPR 16-2-1 and CISPR 15
Voltage Division Factor: 20 dB ±1.5 dB
Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec
View Product View Product

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form