Overview
The E7402A is a flagship EMC spectrum analyzer used for radiated and conducted emissions testing, evaluation and compliance to CISPR, FCC and EN EMC standards. Early evaluation of your design's EMI performance is essential for a successful product. The Agilent (formerly HP, now Keysight) E7402A EMI Analyzer provides the capabilities you need in an analyzer to make in-house EMC precompliance testing a reality.
Radiated emissions
When combined with a broadband antenna, the Agilent (HP) E7402A provides the capabilities to check for radiated emissions coming from your DUT. This is best done in an area that is free from reflective objects such as an open area or EMI chamber.
Conducted emissions
Test for noise or interference placed on power or data lines by coupling the E7402A instrument to the power or data line through a line impedance stabilization network (LISN) device or absorbing clamp.
Diagnostics and problem isolation
If you have an emissions problem, you can use the Agilent (HP) E7402A with an 11940A or 11941A close field probe to isolate and diagnose the source of the problem.
Agilent (HP) E7402A Features:
- Automatic EMI measurements
- Also compatible with the BenchLink Web Remote software
- Log sweep
- 3.5" disk drive
- 5 minute warm-up
- Built-in preamplifier
- Optional tracking generator
- Rugged, portable design
