RIGOL NFP-3 E & H RF Near Field Probe Set 30 MHz up to 3 GHz - The EMC Shop

RIGOL NFP-3 E & H RF Near Field Probe Set 30 MHz up to 3 GHz

Condition:
New
Frequency Range:
30 MHz to 3 GHz
Terminal and Adaptor Impedance:
50 Ohm
Connectors:
SMA (M)
Manufacturer:
Rigol
Online Orders Ship Same Day

 

Availability:

Typically In Stock

SKU:
3518

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The Rigol NFP-3 E & H RF Near Field Probe Set is used with a spectrum analyzer for the EMI tests of electronic products. It can be used to test the magnetic field strength and magnetic field coupling channels on the surface of the electronic components as well as the magnetic field environment near the electronic module so as to quickly locate the interference source. NFP-3 includes four models (NFP-3-P1, NFP-3-P2, NFP-3-P3 and NFP-3-P4).

Connect the spectrum analyzer Connect the SMB (M) terminal of NFP-3 and the BNC (F) terminal of the N-BNC adaptor respectively via the BNC-SMB RF cable; connect the N (M) terminal of the N-BNC adaptor to the RF input terminal of the spectrum analyzer.

Connect the device under test NFP-3 is used to perform short-distance noncontact measurement on the device under test. Pay attention to the direction of the probe during measuring.

Videos

Key Considerations

Manufacturer:
Rigol
Frequency Range:
30 MHz to 3 GHz
Terminal and Adaptor Impedance:
50 Ohm
Connectors:
SMA (M)

Related EMC Equipment & Solutions

ETS-Lindgren 7405 E & H Near Field Probe Set

ETS-Lindgren 7405 E & H Near Field Probe Set

SKU: sku-396

Weight: 2 lbs (0.91 kg)
Current Rating: 800 mA (per line), 1.6 Amps (per pair)
Dimensions: 10.8” x 4.5” x 3.8” (275 mm x 115 mm x 96 mm)
Frequency Range: 150 kHz to 3 GHz
Isolation: 150 kHz to 1.5 MHz: 35 dB to 55 dB (increasing linearly with the log of freq.) 1.5 MHz to 30 MHz: 55 dB
Mains & EUT Connections: D-sub 25 pin female connectors
RF Connector: 50Ω N-type (female)
Standards Met: EN 55022 (CISPR 22), CISPR 16-1-2
Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)
View Product View Product
Amplifier Research (AR) FL7018 Laser Powered E-Field Probe, 3 MHz - 18 GHz - The EMC Shop

Amplifier Research (AR) FL7018 Laser Powered E-Field Probe, 3 MHz - 18 GHz

SKU: sku-278

Weight: 150 g (5.3 oz)
Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.
Battery: N/A
Communication: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic Serial
Digital Filtering: N/A
Dimensions: 65 mm (2.55 in)
Dynamic Range: 1 to 1,000 Volts per Meter (Single Range)
Flatness: Frequency correction OFF: ±1.0 dB @ 10 MHz Frequency correction ON: typically 0.8 dB, 5 kHz–1 GHz 1.4 dB, 1 GHz–18 GHz
Frequency Range: 3 MHz to 18 GHz
Internal Data Memory: None
Measurement Mode: X-Y-Z and Composite
Operation Time: Laser Powered - Seemless
Overload: 1,600 V/m CW 16,000 V/m Peak
PC Software: Optional Software for setup, automation and monitoring available.
Recharging Time: N/A
Resolution: 0.01 V/m
RF Field Probes: E-Field
Sampling Rate: 20 msec/up to 50 samples per second, USB and GPIB only
Sensors: Three monopoles
Standards Met: IEC/EN 61000-4-3
Temperature Reading Resolution: None
View Product Cart
Narda EFD-1891 2 MHz - 18 GHz - The EMC Shop

Narda EFD-1891 E-Field Probe 2 MHz - 18 GHz

SKU: 7202

Measurement Range: 0.6 to 800 V/m (CW), 0.6 to 65 V/m typ. (True RMS)
Dynamic Range: 62.5 dB (nominal)
Flatness: +1/-1.5 dB (10 MHz to 3 GHz), +2/-1.5 dB (>3 GHz to 11 GHz)
Isotropic Deviation: ±1 dB (10 MHz to 5 GHz), ±2.25 dB (> 5 GHz to 18 GHz)
Applications: Broadcasting, telecommunications, and satellite
$575.00
In Stock
Ordering Options

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form