Overview
Teseq CSP 9160A Description:
The Teseq CSP 9160A is a broadband RF current sensor probe as defined in CISPR 16-1-2. Beside the compliance measurements of asymmetrical disturbance currents as e.g. required in CISPR 16-2-1 and CISPR 22, the probe can be used in a number of diagnostic applications to measure superimposed RF currents flowing in conductors, or cable harnesses.
A convenient feature of the CSP 9160A is that, from 100 kHz to 120 MHz, it has a flat frequency response with a 0 dB transducer factor, allowing voltage measurements to be read as current, directly without any correction. The probe can be easily and quickly clipped around the cable under test and the RF currents measured using an oscilloscope, spectrum analyzer, or EMI receiver. Its large aperture (25.4 mm) can accommodate most cables and can handle power lines with currents up to 50 amps.
The CSP 9160A is can also be used as current monitor for BCI testing as per MIL-STD-461 and various automotive standards.
Features & Specifications of Teseq CSP 9160A:
- Frequency range: 9 kHz to 200 MHz
- Insertion loss: 34 dB ±2 dB (50 Ω system, 100 kHz to 120 MHz)
- typical ±1 dB, see also the graphs
- Transfer impedance, transducer factor: as given in the graphs
- Insertion impedance: <1 Ω
- Signal output: BNC socket
- Max. signal current: 1 A
- Max DC current or peak AC current (up to 60 Hz): 50 A
- Classification: Indoor use only
- Operating temperature: 0°C to +40°C
- Storage and transport temperature: -10°C to +60°C
- Relative humidity: up to 90% (no moisture condensation)
- Window diameter (aperture): 25.4 mm
- Dimensions (L x H x W) in mm: 105 x 80 x 38
- Weight: approx. 525 g
- Dimensions of the storage case in mm: 260 x 70 x 210
- Weight: approx. 350 g
[img-1926-left-thickbox_default]
[img-1927-left-thickbox_default]
[img-1928-left-thickbox_default]