SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m - The EMC Shop

SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m

Connector:
N-Type, female
Frequency Range:
20 MHz to 330 MHz
Impedance:
50 ohm
Max Radiated Field Strength:
200 V/m
Standards Met:
MIL 461
Online Orders Ship Same Day

 

SKU:
sku-2122

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

The SteppIR SY3-EMC Tunable Antenna System is a solution to MIL-STD-461G and RS-103 for radiated susceptibility testing over the 30-200 MHz frequency range, making it the only system in the world that can legitimately claim to reach or exceed the required 200 V/m @1 meter at the fundamental frequency. SteppIR SYS3-EMC antenna systems offer the pinnacle of performance for EMC testing and commercial, military, emergency communications and marine applications. The SteppIR SYS3-EMC also offers the ability to tune the antenna to the exact length required with a monoband antenna on every frequency.

SteppIR SYS3-EMC E-Field Generator 20 MHz - 300 MHz, 200 V/m

  • 30 - 200 MHz
  • Fulfills MIL-STD-461G RS-103 200 V/m with approx 1500 Watts
  • Yagi, vertical and dipole antenna options
  • Ultra-low SWR (1.5:1 typical)
  • High-Q design reduces 2nd harmonic radiation by 25 dB or more
  • OptimizIR-EMC auto-tune system allows you to effortlessly tune antenna to exact length required at any given frequency automatically

Key Considerations

Connector:
N-Type, female
Frequency Range:
20 MHz to 330 MHz
Impedance:
50 ohm
Max Radiated Field Strength:
200 V/m
Standards Met:
MIL 461

Related EMC Equipment & Solutions

Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

Amplifier Research FP7060 E-Field Probe Kit, 27 MHz – 60GHz, 0.7–300 V/m

SKU: sku-650

Weight: 350g approx
Application/Test Type: electric field measurement instrument for use in EMC and EMI applications
Battery: 2 built-in NiMH batteries, size AA, rechargeable, changed by operator, 40 hours operating life per charge.
Communication: 10 m glass cable
Dimensions: Approx. 420 x 85 x 65 mm including base and probe
Frequency Range: 27MHz–60GHz
Measurement Mode: composite values
Operation Time: 40 hours operating life per charge.
Recharging Time: Standard recharger included, 3 hour charge time
RF Field Probes: E-Field
Sampling Rate: 60Hz, 50Hz, 5 Hz. - user selectable
Sensors: Isotropic
View Product Cart
AH Systems SAS-540 Biconical Antenna, 20 MHz to 330 MHz, up to 2 V/m

AH Systems SAS-540 Biconical Antenna, 20 MHz to 330 MHz, up to 2 V/m

SKU: sku-674

Weight: 3.8 lb.'s (1.72 kg)
Antennas: Biconical Antennas
Application/Test Type: Radiated emissions and immunity
Connector: N-type (female)
Dimensions: Height: 29 in. (73.7 cm) Width: 52.5 in. (133.4 cm)
Frequency Range: 20 MHz - 330 MHz
Gain: -22 to 2.8 dBi
Impedance: 50 Ohms nominal
Maximum Continuous Power: 1 Watts
Mounting Base: ABC-B (included)
VSWR: 2.0:1
View Product Cart
Com-Power CGO-520 Comb Generator 20 MHz - 4.5 GHz 20 MHz steps

Com-Power CGO-520 Comb Generator 20 MHz - 4.5 GHz 20 MHz steps

SKU: sku-428

Weight: 2 lbs. / 0.9 kg
AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz
Antennas: 2 and 12 inch Monopole
Application/Test Type: EMI Radiated Site Reference Source
Battery: 6V NiMH, 1 Ah
Dimensions: 7 x 0.75 inches / 17.7 x 1.9 cm
Frequency Range: 20 MHz - 4.5 GHz in 20 MHz steps
Operation Time: 18 Hours Typical With Fully Charged Battery
Polarity: Vertical and Horizontal
View Product Cart
Narda 8511 Magnetic Field Meter, 300 kHz - 100 MHz

Narda 8511 Magnetic Field Meter, 300 kHz - 100 MHz

SKU: 6196

Frequency Range: 300 kHz to 100 MHz
Band Coverage: 0.3 - 1.0 MHz, 1.0 - 20 MHz,20 - 80 MHz, 80 - 100 MHz
Measurement Range: 0.1 bis 100 mW/cm² E field, 0.2 bis 200 mW/cm² H field
Condition (Scale 5-10): 7 (Good)
$3,750.00
In Stock
Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

Com-Power PAM-103 1 MHz - 1 GHz Preamplifier

SKU: 10215

Weight: 3.3 lbs. (1.5 kg)
Application/Test Type: Increases system sensitivity enhancing the capability of measurement system to measure low level signals for EMI / EMC Measurements
Connector: 50Ω N-Type (f)
Dimensions: 7.5 x 5 x 3 inches
Frequency Range: 1 MHz - 1000 MHz
Gain: 33 dB typical (± 3 dB flatness)
Input: 12 VDC, 0.7 A NimH (2 x 6 V NimH Battery packs)
Maximum Continuous Power: +4 dBm @ 1 dB compression
VSWR: 1.3:1
Inquire for Availability
View Product Cart
Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

Amplifier Research FP7018 3 MHz –18 GHz, 1000 V/m Electric Field Probe

SKU: sku-914

Dimensions: 420 x 85 x 65 mm including base and probe head.
Weight: 350g Approximately
Battery: Standard recharger included, 3 hour charge time.
Damage Level: 1600 V/m CW and 16,000 V/m peak
Data Transfer Rate: 30 samples per second
Dimensions-2: 420 x 85 x 65 mm
Operating Temperature: 0 to 50°C
Power Requirements: 2 built-in NiMH batteries, size AA, Rechargeable, changed by operator, 40 hours operating life per charge.
Probe Head Diameter: 65mm
Probe Sampling Rate: 60Hz, 50Hz, 5 Hz- user selectable
Ranges: Single continuous range
Sensitivity: 0.6–1000 V/m
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form