Overview
Also known as Magnetic Loop Antenna, the Com-Power AL-130R is compliant with CISPR 16-1-4. It is ideal for emissions measurements as required by various EMC standards such as FCC 18, CISPR 11, CISPR 13, CISPR 14, CISPR 32 and many more. The built-in, low-noise preamplifier, increases overall measurement sensitivity as well as the overall signal to noise ratio. As per ANSI C63.4-2014, the use of active loop antenna for compliance testing is permitted in a non-sheilded environment ONLY if the saturation indicator is continuously monitored during the course of testing. Com-Power’s Remote Antenna Interface (RAI-100) comes in very handy for this application. It is a compact controller which can be used to enable/ disable RF measurement circuit and monitor saturation and battery low conditions remotely via a fiber optic cable up to 30 mtrs in length.
Technical Specifications:
- Frequency Range: 9 khz to 30 MHz
- Loop Size: 19" x 19" (0.5 m x 0.5 m)
- Nominal Impedance: 50 Ω (output port)
- Batttery Type: 6 VDC NimH (rechargeable)
- Average Battery Life: 10 - 12 Hours
- E-Field Antenna Factors: 13.4 to 16.4 (average: 14-9) [dB(m-1)]
- Saturation Level: >1 V/m / >120dBμV/m (>2.65 mA/m) / >68.5 dBμA/m
- Antenna Factor Variation: ±1.5 dB
- RF Connector: BNC-type (female)
- Specifications: ANSI C63.4, CISPR, EN, ETSI, etc.
- Dimensions (H x W x D): 20.1" x 19.7" x 10.6" [51 x 50 x 27 cm]
- Weight: 5.5 lbs. [2.5 kg]
