EMC Antennas Categories
EMC Antennas Test Equipment, Systems & Solutions
-
AH Systems SAS-540 Biconical Antenna, 20 MHz to 330 MHz, up to 2 V/m
SKU: sku-674
Weight: 3.8 lb.'s (1.72 kg)Antennas: Biconical AntennasApplication/Test Type: Radiated emissions and immunityConnector: N-type (female)Dimensions: Height: 29 in. (73.7 cm) Width: 52.5 in. (133.4 cm)Frequency Range: 20 MHz - 330 MHzGain: -22 to 2.8 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 1 WattsMounting Base: ABC-B (included)VSWR: 2.0:1 -
AH Systems SAS-545 1 GHz Biconical Antenna
SKU: sku-573
Weight: 1.6 lb.'s (725 g)Antennas: Biconical AntennasApplication/Test Type: Radiated emissions and immunityConnector: N-type (female)Dimensions: Height: 15 in. (38.1 cm) Width: 14 1/4 in. (36.25 cm) Depth: 7 11/16 in. (19.5 cm)Frequency Range: 30 MHz - 1GHzGain: -50 to 2.5 dBiImpedance: 50 Ohms nominalMaximum Continuous Power: 200 WattMounting Base: ABC-B Mounting Clamp with ¼ - 20 Thread, female -
3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω
SKU: sku-562
Connector type: N 50 ΩDimensions: 4.30 x 1.5x 1.05 m, .95 m table heightDistance between the plates: 150 mmFrequency range: 0 GHz - 1 GHzMax. input power: 1000 WStandards Met: ISO 11452-5Stripline: Conform with ISO 11452-5Typical impedance: 50 ΩTypical VSWR (30 - 1000 MHz): Better than 1.22 -
Rent AH Systems EMC Antenna Kit, 20 Hz to 2 GHz
SKU: 10487
Weight: 35 lb.'sDimensions: 28" x 23" x 10" (case)Frequency Range: 20 Hz to 2 GHzStandards Met: FCC, MIL-STD, VDE and TEMPEST Testing -
ISO 11452-5 Turn Key Solution for Stripline Immunity EMC Tests
SKU: 10462
Test Standards: ISO 11452-5Frequency Range: DC - 1 GHzApplications: Automotive EMC Testing, Electric Vehicle and Battery EMC TestingInquire for Availability -
PMM (Narda) RF-300 Large Loop Antenna System (LLAS) for EN 55015 (CISPR - 15)
SKU: sku-458
Antenna Factor (1 Meter): According to CISPR 16-1-4 Annex CAntennas: Loop AntennasConnector: BNCConstruction: Wood & plastic tubes, collapsibleDimensions: Height: 2,6 mX- Y Width: 2,1 m Distance to ground: min. 0,5 mFrequency Range: 9 kHz to 30 MHzImpedance: 50 OhmStandards Met: EN 55015 section 9.1.1 & CISPR 16-1-4 Annex C -
PMM (Narda) AS-05 Broadband Antenna Set, 30 MHz - 18 GHz
SKU: sku-457
Weight: 1.8/1.1/.25 kg.Antenna Factor (1 Meter): 8 to 14 dB/m typical/12 to 40 dB/m typical/36 to 41 dB/m typicalAntennas: (BC-01, LP-04, DR-01)Application/Test Type: Radiated EMCConnector: N-Type(female)Construction: aluminumDimensions: see descriptionFrequency Range: 30 MHz - 200 MHz/200 MHz to 6 GHz/6 to 18 GHzGain: -15 +2 dBi typical/6 dBi typical/9 to 16 dBi typicalImpedance: 50 Ω nominalMax input power: 100/100/150WMaximum Continuous Power: 100 Watts up to 1 GHz (75 watts up to 6 GHz) -
Com-Power CGC-510E Comb Generator 100 kHz - 400 MHz
SKU: sku-432
Weight: 1 lbs / 0.5 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzApplication/Test Type: Reference Signal Source for LISN verificationBattery: 6V NiMH, 1 AhDimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cmFrequency Range: 100 kHz to 400 MHz in 100 kHz or 500 kHzMains & EUT Connections: LISN Interface Plug NEMA 15-P typeOperation Time: 18 Hours Typical With Fully Charged Battery -
Com-Power CGO-51000 Comb Generator 1 GHz - 40 GHz 1 GHz steps
SKU: 43011
Weight: 2.5 lbs (1.1 kg)AC Power Adapter: 6 VDC 500 mAAntennas: Integral Stub-type (w/protective cover)Application/Test Type: Radiated Reference Signal Source (for OATS, SAC, FAC, etc.)Battery: 6V NiMH, 1 AhDimensions: 7 in. x 1 in. (17.8 cm x 2.5 cm)Frequency Range: 1 GHz to 40 GHz in 1 GHz stepsOperation Time: 18 Hours Typical With Fully Charged BatteryPolarity: Vertical, HorizontalInquire for Availability -
Com-Power CGO-5100B Comb Generator 1 GHz - 18 GHz 100 MHz step
SKU: sku-429
Weight: 1 lbs / 0.5 kgAC Power Adapter: 6 VDC, 500AAntennas: Built inApplication/Test Type: EMI Radiated Site Reference SourceBattery: 3.6 V, NimHDimensions: 8 x 1 inches / 19.2 x 2.4 cmFrequency Range: 1 to 18 GHz in 100 MHz stepsOperation Time: 18 Hours Typical With Fully Charged Battery -
Com-Power CGO-520 Comb Generator 20 MHz - 4.5 GHz 20 MHz steps
SKU: sku-428
Weight: 2 lbs. / 0.9 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzAntennas: 2 and 12 inch MonopoleApplication/Test Type: EMI Radiated Site Reference SourceBattery: 6V NiMH, 1 AhDimensions: 7 x 0.75 inches / 17.7 x 1.9 cmFrequency Range: 20 MHz - 4.5 GHz in 20 MHz stepsOperation Time: 18 Hours Typical With Fully Charged BatteryPolarity: Vertical and Horizontal -
Com-Power CGO-515 Comb Generator 1 MHz - 1.5 GHz 1 and 5 MHz Steps with Circular Base
SKU: sku-427
Weight: 1 lbs. / 0.48 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzAntennas: 3 and 12 inch MonopoleApplication/Test Type: EMI Radiated Site Reference SourceBattery: 6V NiMH, 1 AhDimensions: 3 x 3 x 3 inches / 7.6 x 7.6 x 7.6 cmFrequency Range: 1 MHz to 1.5 GHz in 1 MHz and 5 MHz step sizesOperation Time: 18 Hours Typical With Fully Charged BatteryPolarity: Vertical and Horizontal