SAE Categories
SAE Test Equipment
-
EM Test UCS 200N50 Automotive Transient Simulator
SKU: 11183
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesStandards Met: ISO 7637, DC 10614, SAE J1113,Max EUT DC Voltage (w/ Built In CDN): 80 VoltsMax EUT DC Current (w/ Built In CDN): 50 AmpsPeak Inrush Current Capability: 100 Amps$975.00 - $5,495.00In Stock -
Bulk Current Injection Test Setup - 10 Vrms IEC 61000-4-6
SKU: sku-2194
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITBCI Test Levels (w/ built-in amplifier): 10VFrequency Range (w/ built-in amplifier): 10 kHz - 230 MHzIn Stock -
3ctest TIS 700 Automotive Transient Simulator ISO 7637
SKU: 11772
Test voltage: 3 - 700 VoltsMax EUT DC Voltage (W/ Built In CDN): 60 VoltsMax EUT DC Current (W/ Built In CDN): 30, 60, 100, 200 AmpsSource Impedance: 2 Ω, 4 Ω, 10 Ω, 20 Ω, 30 Ω, 50 ΩCoupling Modes: ICC, CCC, DCC$750.00 - $5,675.00In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: 11018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzInquire for Availability -
3ctest LDS 200 Automotive Load Dump Simulator
SKU: 6636
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesDUT voltage: Max. 60VStandards Met: ISO 7637, ISO 16750-2, FMC1278, Many MorePower Input: AC 110/220V, 士10%,45-65HzDUT Max Current: 50 Amps$1,350.00 - $1,975.00IN STOCK -
Teseq NSG 5500 Automotive Immunity Generator
SKU: 10257
Applications: Automotive Electrical Disturbances, EV EMC TestingTest Standards: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsInquire -
3ctest EDS MAX30 ESD Simulator Gun
SKU: 141242
Output Voltage Range: 200 Volts to 30,000 VoltsVoltaage Resolution: 100VHolding Time: 5 - 10 sTest Standards: ISO 10605, IEC/EN 61000-4-2:2025Remote & Automation Control: Via fiber optic interfaceTypically In Stock -
FCC F-140 Bulk Current Injection Probe
SKU: 15365
Applications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingMaximum input power: 100 WattsTest Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114Hole Diameter: 1.57" ( 40mm )Frequency Range: 10 kHz - 1 GHz$295.00 - $2,150.00RENTAL ONLY | Typically In Stock -
AE Techron DSR 100-25 4-Quadrant AC/DC Voltage Source
SKU: 12355
Test Standards: DO-160G Section 16, MIL STD 461, SAE J1113-11, ISO 16750-2, ISO 7637-2Frequency Range: DC to 300 kHzOutput Current: 25 Amps Continuous (50A Peak)In Stock -
Teseq NSG 4060 Low Frequency Immunity Generator
SKU: 11497
Frequency Range: DC/3 Hz - 150 kHzMax Output Voltage: 30 Vrms (up to 300V short duration tests)Pulse Modulation Freq Range: 3 Hz to 10 kHzOutput Impedance: 50 Ohms from the generator (1 or 10 Ohms with couplers)Output Connections: Two 4mm Safety BananasTypically in Stock -
EM Test CWS 500N2.2 BCI Test System
SKU: 21252
Test Capabilities: RF Conducted ImmunityStandards Met: MIL STD 461 CS 114, DO-160 CS TestApplications: Vehicle, Military and Aerospace, BCI TestingBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµAFrequency Range (w/ built-in amplifier): 9 kHz - 400 MHzTypically In Stock -
Teseq/Ametek CTS NSG 4070D
SKU: 10549
Standards Met: IEC 61000-4-6, MIL-461 CS114, ISO 11452-4, DO-160 Section 20 Conducted SusceptibilityApplications: Bulk Current Injection Testing, RF Conducted ImmunityInternal Amplifiers: 50 or 100 Watts (or none)System Frequency Range: 4 kHz - 1 GHzInternal Amp Frequencies: 150 kHz to 230 MHz or 4 kHz to 400 MHzTypically In Stock