SAE Categories
SAE
-
Teseq/Ametek CTS NSG 4070D RF Test Generator
SKU: 10549
Standards Met: IEC 61000-4-6, MIL-461 CS114, ISO 11452-4, DO-160 Section 20 Conducted SusceptibilityApplications: Bulk Current Injection Testing, RF Conducted ImmunityInternal Amplifiers: 50 or 100 Watts (or none)System Frequency Range: 4 kHz - 1 GHzInternal Amp Frequencies: 150 kHz to 230 MHz or 4 kHz to 400 MHzTypically In Stock -
EN/IEC 61000-4-6 30 V/m Level 4 BCI Test Package
SKU: 53194
Standards Met: IEC/EN 61000-4-6BCI Test Levels (w/ built-in amplifier): 30 V/mFrequency Range (w/ built-in amplifier): 150 kHz - 230 MHzApplication: BCI Test Setup$3,250.00In Stock -
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: 5955
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$2,290.00Typically In Stock -
3ctest TIS 700 Automotive Transient Simulator ISO 7637
SKU: 11772
Test voltage: 3 - 700 VoltsMax EUT DC Voltage (W/ Built In CDN): 60 VoltsMax EUT DC Current (W/ Built In CDN): 30, 60, 100, 200 AmpsSource Impedance: 2 Ω, 4 Ω, 10 Ω, 20 Ω, 30 Ω, 50 ΩCoupling Modes: ICC, CCC, DCC$1,895.00In Stock -
Teseq NSG 4070C-35 Test System for Conducted RF Immunity to IEC 61000-4-6
SKU: 10548
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6, MIL-461 CS114, ISO 11452-4Applications: Bulk Current Injection Testing, RF Conducted ImmunityCDN Test Levels (w/ built-in amplifier): 30VrmsBCI Test Levels (w/ built-in amplifier): 200mATypically In Stock -
Amplifier Research FL8018 Isotropic Field Probe, CW and Pulse, 18 GHz
SKU: 11018
Frequency Range: 20 MHz - 18 GHzMeasurement Type: CW, AM & PulseField Strength Range: 2 – 1000 V/mDynamic Range: >54 dBIsotropic Deviation (Measured at Ortho Angle): ±0.5 dB @ 100 MHzInquire for Availability -
3ctest LDS 200 Automotive Load Dump Simulator
SKU: 6636
Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical DisturbancesDUT voltage: Max. 60VStandards Met: ISO 7637, ISO 16750-2, FMC1278, Many MorePower Input: AC 110/220V, 士10%,45-65HzDUT Max Current: 50 Amps$1,975.00IN STOCK -
Teseq NSG 5500 Automotive Immunity Generator
SKU: 10257
Applications: Automotive Electrical Disturbances, EV EMC TestingTest Standards: ISO 7637Max EUT DC Voltage (w/ Built In CDN): 60 VoltsMax EUT DC Current (w/ Built In CDN): 30 AmpsPeak Inrush Current Capability: 300 AmpsInquire -
3ctest EDS MAX30 ESD Simulator Gun
SKU: 141242
Output Voltage Range: 200 Volts to 30,000 VoltsVoltaage Resolution: 100VHolding Time: 5 - 10 sTest Standards: ISO 10605, IEC/EN 61000-4-2:2025Remote & Automation Control: Via fiber optic interfaceTypically In Stock -
FCC F-140 Bulk Current Injection Probe
SKU: 15365
Applications: RF Current Monitoring, EMC BCI Tests, Military EMC TestingMaximum input power: 100 WattsTest Standards: ISO 11452-4, IEC 61000-4-6 BCI, DO-160 Section 20, MIL-STD-461 CS114Hole Diameter: 1.57" ( 40mm )Frequency Range: 10 kHz - 1 GHz$750.00RENTAL ONLY | Typically In Stock -
Teseq NSG 4060 Low Frequency Immunity Generator
SKU: 11497
Frequency Range: DC/3 Hz - 150 kHzMax Output Voltage: 30 Vrms (up to 300V short duration tests)Pulse Modulation Freq Range: 3 Hz to 10 kHzOutput Impedance: 50 Ohms from the generator (1 or 10 Ohms with couplers)Output Connections: Two 4mm Safety BananasTypically in Stock -
EM Test CWS 500N2.2 BCI Test System
SKU: 21252
Test Capabilities: RF Conducted ImmunityStandards Met: MIL STD 461 CS 114, DO-160 CS TestApplications: Vehicle, Military and Aerospace, BCI TestingBCI Test Levels (w/ built-in amplifier): 400mA/114 dBµAFrequency Range (w/ built-in amplifier): 9 kHz - 400 MHzTypically In Stock