3ctest EDS 30V Overview
3ctest EDS 30V Automotive ESD Simulator for ISO 10605 is an advanced intelligent electrostatic discharge generator, the output voltage 30kV. LCD touch screen is simple and easy to operate, RC module can be replaced, the built-in temperature hygrometer, remote control software, to ensure the reliability of all kinds of tests.
Applications:
- Communication
- Information technology
- Telecom
- Automotive
- Military
- Medical
- Aviation
- Broadcast and TV
- New energy and power
- Railway
Features:
- Hold Time: >5 seconds
- Includes Four R/C Combinations 150/330 pF and 330/2k Ohm
- LCD touch screen control
- Temperature and humidity record and protection
- Automatic polarity switching over
- Discharge modules can be replaced, automatic identification
- Built-in standard test library
- Intelligent detection the failure of air discharge
- Air- and Contact- Discharge: 1000-30,000 Volts ±5%
- Resolution: 100 Volts
- Frequency Repetition: Single/0.2/0.2/0.5/1/2/5/10/20 Hz
- Standards Met: Bellcore GR-1089-Core, IEC/EN 61325, IEC/EN 61000-6-1 and 6-2, ISO 10605, ITU-TK.20, GB/T 17626.2 and more...
- Integrated sensor to monitor temperature and humidity
- Rise Time: 0.8 ns ±25% (0.6 to 1 ns)
- Current Peak Value Accuracy: ±10%
[split]
| Technical Parameters | |
| Contact discharge | 200V – 30,000V +/-5% |
| Air discharge | 200V – 30,000V +/-5% |
| Voltage step | 100V |
| Holding time | > 5s |
| Polarity | +/- |
| RC module recognition | Automatic recognition and LCD display |
| Temperature and humidity | Built-in temperature and humidity meter with record and protection function |
| Pulse repetition rate | single/0.1/0.2/0.5/1/2/5/10/20Hz |
| Trigger mode | manual & auto |
| Pulse counting | 1-9999 |
| Discharge module | 330 pF/2000 Ω 150 pF/2000 Ω |
| 330 pF/330 Ω 150 pF/330 Ω | |
| Summary procedure | Test as per standard level |
| Rising time | 0.7-1.0ns |
| Quick start test program | Simple and easy to reset data online |
| Evaluate procedure | Contact discharge test at 20Hz, evaluate the test points of DUT |
| Standard Test Procedure | ISO 10605 |
| General parameters | |
| Weight | Approx.11kg |
| Environment temperature | 15-35°C (operating conditions) |
| Relative humidity | 30%-60% (operating conditions) |
| Air pressure | 86 kPa - 106 kPa |
| Working power supply | 100V-240 V+/-10% 50/60 Hz |
| Options | |
| DMX | Customized discharge module |
| Grounding high voltage resistor | 2x470 k ohm |
| Vertical coupling plane | 500 x 500 mm |
| Horizontal coupling plane | 1600 x 80 mm |
| Grounding reference plane | 2700 x 1800 mm |
| Test table | 1600 x 800 x800 mm, fully wooden, as per IEC 61000-4-2 |
| Battery box | 8*2600mAh Ni-MH charging battery, around 8h for contact discharge +30kV?1Hz, size 140mm x100mm x35mm.weight 0.5kg |
| Battery charger | Used for charging |
| ESD calibration set | Used for calibration waveforms as per ISO 10605, including 2 ohm target/4GHz, attenuator, coaxial cable and user manual |
| Standard equipped | |
| Discharge gun | Discharge gun and control 1PC |
| High voltage generator | High voltage power supply with programmable control 1PC |
| Standard RC module | 330PF/2000Ω 150PF/2000Ω 330PF/330Ω 150PF/330Ω Discharge modules can be replaced |
| Discharge tip | Air discharge tip, contact discharge tip |
| Grounding wire | 2m |
| Package | Suitcase |
| Documents | Factory calibration report and user manual |
