E&I / ENI 1020L Overview
The 1020L Amplifier is a rugged source of RF power for ultrasonics, induction heating and laser modulation as well as plasma applications. It is a totally solid state solution employing RF DMoS FETs in the power amplification stages, offering simultaneous forward and reverse power readouts, and RS232 port for data collection. The 1020L reflects E&I’s commitment to reliable and robust RF power.
Flexible Operation:
The 1020L produces 200 Watts of quasi linear class AB power over a frequency range of 10 KHz to 5 MHz, with a nominal power gain of 53 dB (+/-1.5dB). Operation over the entire frequency range is possible without the need for any switching.
The front panel display provides simultaneous measurements of forward and reflected power as well as the unit’s status. The RS232 connector at the rear of the unit can also be used to capture this data and reset the unit should a fault occur. The E&I 1020L is a 19” rack mount unit 3U high. It employs an integral power supply capable of operation at 115 or 220 VAC, 50 – 60 Hz. The unit weighs approximately 45 lbs or 16 Kg.
Features:
- Class of Operation: Class AB
- Frequency Range: 10 kHz to 5 MHz
- Rated Power Output: 200 W
- Power Gain: 53 dB
- Gain Flatness: ±1.5 dB
- Input Power for Rated Output: 1.0 mW / 0 dBm
- Input Impedance: 50 Ohms
- Output Impedance: 50 Ohms
- Size (H x W x D): 5.3" x 16.5" x 18.4" (134.5 mm x 420 mm x 467 mm)
- Weight: 45 lbs (20.5 kg)
- 104 - 240 Vac; 47-63 Hz
