IEC 61000 Test Equipment - The EMC Shop

International (IEC/EN)

(Showing 12 of 249)

Rent IEC 61000 Test Equipment The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.

Application Support, Pricing, Lead Time & More: Contact Form

International (IEC/EN) Categories

International (IEC/EN) Test Equipment, Systems & Solutions

Teseq NSG 435 Electrostatic Discharge Simulator

SKU: 11449

1 review

Test Standards: IEC 61000-4-2

Applications: Medical, Commercial Electronics, IT, and more

Test Capabilities: Air/Contact up to 15kV

Pre-programmed Test Limits: Yes

More Resources: Test Setup, ESD Waveform, RMA Form

Cost New:

Was:

Price Now:

$590.00 - $8,495.00

In Stock

ORDERING OPTIONS
Amplifier Research (AR) ATR80M6G Wide Band, High Gain Log Periodic Antenna

SKU: 2657

Max RF Input Power: 5,000 Watts

Antenna Factor (1 Meter): 14 to 67 db/m (±1.5 dB)

Application/Test Type: Radiated Immunity Testing

Dimensions: 132.1 x 20.32 x 97.8 cm (52 x 8.0 x 38.5 in)

Frequency Range: 80 MHz - 6 GHz

Max Radiated Field Strength: 1,000 V/m

VSWR: 2.0:1 (Max: 3.0:1)

Cost New:

Was:

Price Now:

$1,275.00 - $14,950.00

Typically In Stock

ORDERING OPTIONS
Narda PMM EP-602 5 kHz - 9.25 GHz Broadband Active Electric Field Probe

SKU: 5497

Application/Test Type: Monitoring Electric Field Strengths

Field Strength Range: 1.5 to 1500 V/m (0.01 V/m)

Frequency Range: 5 kHz to 9.25 GHz

Standard Met: IEC/EN 61000-4-3

Interface: Fiber-Optic

Battery Life: 60-80 hours

Dynamic Range: 1,5 to 1500 V/m, 60 dB single range

Typically In Stock

VIEW PRODUCT Cart
Teseq CDN M5 5-Line Coupling Network for AC Power Lines, 16-32 Amps

SKU: sku-227

Weight: 6.5 kg (14.3 LB.'s)

Application/Test Type: 5 mains AC power lines emissions testing up to 32 Amps (3L+N+PE)

Common Mode Impedance: 150 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 230 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: 32 Amps Maximum

Decoupling of Common Mode Disturbance: Greater than 30 dB

Dimensions: 6.3 x 6.3 x 20 inches (16.0 cm x 16.0 cm x 50.0 cm)

Frequency Range: 150 kHz to 230 MHz (Optional 10 kHz - 80 MHz)

Insertion Loss: Greater than 0.1 dB

Mains & EUT Connections: 4 mm, safety (Optional IEC 320 16A)

RF Connector: BNC, 50 Ω

RF Input Voltage: Less than 30 V

Standards Met: IEC 61000-4-6

Voltage Division Factor: 10 dB +3 dB / -1 dB

Voltage Rating: AC max. voltage (line to ground) / (line to line): 250 V / 433 V (CDN M216-1000V: 500 V / 1000 V); DC max. voltage (line to ground) / (line to line): 400 V / 800 V (CDN M216-1000V: 1000 V / 2000 V); Test voltage: 3 kV DC, 2 sec

VIEW PRODUCT VIEW PRODUCT
Teseq CDN M1-10 Coupling Network 10 KHz to 80 MHz for PE Lines

SKU: sku-222

Weight: 3.3 Lbs (1.5 kg)

Application/Test Type: switchable 2 or 3 power lines, (L+N or L+N+PE)

Common Mode Impedance: 10 kHz to 26 MHz: 150 Ω ±20 Ω; 26 MHz to 80 MHz: 150 Ω +60 Ω / -45 Ω

Current Rating: Current max. (no saturation): 300 mA; Current max. (1 s for PE line test): 25 A

Dimensions: 3.9" x 3.9" x 9.5" (100 mm x 100 mm x 240 mm)

Frequency Range: 150 kHz to 230 MHz

Insertion Loss: Less than 0.1 dB

RF Connector: BNC 50 Ω

RF Input Voltage: Less than 20 Volts

Standards Met: IEC/EN 61000-4-6

Voltage Division Factor: 10 dB ±1 dB

Voltage Rating: 3 kV DC, 2 sec

Cost New:

Was:

Price Now:

$790.00
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture

SKU: 10205

Weight: 9 Lb.'s

Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

Dimensions: 10" x 7" x 6"

Frequency Range: 20 Hz - 500 MHz

VIEW PRODUCT Cart
AH Systems SAS-571 Broadband Double Ridge Horn Antenna

SKU: 4192

Weight: 3.5 lb.'s (1.59 kg)

3dB Beamwidth (E-Field): 48°

3dB Beamwidth (H-Field): 30°

Antenna Factor (1 Meter): 22 to 44 dB/m

Antennas: Double Ridge Guide Horn Antenna

Aperture: 5.5" x 9.6" (13.9cm x 24.4cm)

Application/Test Type: FCC, MIL-STD, VDE and TEMPEST Testing

Connector: N-Type, female

Dimensions: 11" x 5.6" x 9.6" (27.9cm x 14.2cm x 24.4cm)

Frequency Range: 700 MHz - 18 GHz

Gain: 1.4 to 15 dBi

Impedance: 50 Ohms

Max Radiated Field Strength: 200 V/m

Maximum Continuous Power: 300 Watts

Mounting Base: ¼ - 20 Thread, female

VSWR: 1.6:1 (3.5:1 max)

Cost New:

Was:

Price Now:

$249.00 - $395.00

Typically In Stock

ORDERING OPTIONS
Haefely AXOS5 Surge/EFT/Burst Impulse Generator up to 5 kV

SKU: 10180

Applications: Conducted Immunity Testing, CE Marking, Medical Devices

Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

Max EUT AC Voltage (W/ Built In CDN): 264 Volts

Max EUT AC Current (W/ Built In CDN): 16 Amps

EFT/Burst Pulse Output Capability: 5.0 kV

Combination/Wave Surge Output Capability: 5.0 kV

Dips, Interrupts & Variations: Requires DIP 116

Cost New:

Was:

Price Now:

$975.00 - $1,795.00

Typically In Stock

ORDERING OPTIONS
Teseq KEMA 801A RF Attenuation Clamp/Decoupling Network for IEC 61000-4-6

SKU: sku-122

Weight: approx. 5.5 kg

Dimensions: 670 mm x 100 mm x 79 mm

Frequency Range: 150 kHz to 1000 MHz

Max. Cable Diameter: 20 mm

Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

VIEW PRODUCT Cart
Teseq (Schaffner) KEMZ 801A EM Clamp Conform with IEC/EN 61000-4-6

SKU: sku-119

Weight: approx. 7 kg

Application/Test Type: Injects the disturbance signal through a combination of inductive and capacitive coupling

Clamp factor (CF): Max (0.15 to 400 MHz): 4 dB (50 Ω system) and 13.5 dB (150 Ω system)

Connector: N-type female

Dimensions: 647 mm x 130 mm x 105 mm

Frequency Range: 10 kHz to 1000 MHz

Impedance: 50 Ohms

Max. Cable Diameter: 20 mm

Maximum Continuous Power: 0.01 to 100 MHz: 100 W for 15 min; 100 to 230 MHz: 100 W for 3 min; 230 to 1000 MHz: 50 W for 3 min

Standards Met: IEC/EN 61000-4-6; CISPR 24; EN 61000-6-1; EN 61000-6-2; IEC 60533; IEC 60601-1-2; IEC 61326

VIEW PRODUCT Cart
Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines

SKU: sku-91

Weight: 5 lbs. 2.3 kg

Application/Test Type: five conductor power cable

Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω

Current Rating: 25 Amps AC / 17 Amps DC (Max)

Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)

Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 4 mm shrouded banana sockets

RF Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Standards Met: IEC / EN 61000-4-6

Voltage Division Factor: 9.5 dB +4 / -1

Voltage Rating: 250 V AC / 350 V DC (Line to Ground)

VIEW PRODUCT Cart
Com-Power CDN-M425E 3-Phase + Earth Coupling Decoupling Network

SKU: sku-90

Weight: 5 lbs. 2.3 kg

Application/Test Type: Four conductor power cable

Common Mode Impedance: 150 kHz - 26 MHz: 150Ω ± 20Ω 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω

Current Rating: 25 Amps AC / 17 Amps DC (Max)

Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)

Dimensions: 6 x 6 x 13 inches 15.2 x 15.2 x 33 cm

Frequency Range: 150 kHz to 230 MHz

Mains & EUT Connections: 4 mm shrouded banana sockets

RF Connector: 50 Ω BNC (Female)

RF Input Voltage: 40 V (Max)

Standards Met: IEC / EN 61000-4-6

Voltage Division Factor: 9.5 dB +4 / -1

Voltage Rating: 250 V AC / 350 V DC (Line to Ground)

VIEW PRODUCT VIEW PRODUCT