The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.International (IEC/EN) Categories
International (IEC/EN) Test Equipment, Systems & Solutions
-
Amplifier Research 40AD1 DC - 1MHz RF Power Amplifier
SKU: 4272
Output Power: ~50 WattsFrequency Range: DC - 1 MHzApplications: Radiated ImmunityMax. Gain: 45 dB minimumInput for Rated Output: 1.0 milliwatt maximumInput Impedance: 50Ω; VSWR 1.5:1 maximumOutput Impedance: 50Ω; VSWR 2.0:1 maximumInquire for Availability -
Haefely PIM 150 Oscillating Wave Surge Generator
SKU: 10526
Burst frequency: 100 kHz & 1 MHzCoupling: Single & Multiple PathMains & EUT Connections: HV connector & CDNSource Impedance: 200 ohmsStandards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613In Stock -
Haefely PLINE 1610 Voltage Failure Simulator
SKU: 10503
Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Voltage Range: 0 - 264 VoltsFrequency Range: 48 to 62 HzCurrent Range: up to 16A rms continuous, 20A @ 80%, 23A @ 70%, 40A @ 40%(rms for 5s)Phase synchronization: Synchronous 0 to 360 resolution, AsynchronousTest duration: 1s to 100 hoursTrigger: Auto, Manual, External$1,275.00 - $19,750.00Typically In Stock -
Teseq NSG 4060 Low Frequency Immunity Generator
SKU: 11497
Frequency Range: DC/3 Hz - 150 kHzMax Output Voltage: 30 Vrms (up to 300V short duration tests)Pulse Modulation Freq Range: 3 Hz to 10 kHzOutput Impedance: 50 Ohms from the generator (1 or 10 Ohms with couplers)Output Connections: Two 4mm Safety BananasTest Standards: EN/IEC 61000-4-16, EN/IEC 61000-4-19Applications: Low Frequency Conducted Immunity TestingTypically in Stock -
PMM 1008 Magnetic Field Generator with Loop Antenna, 1200 A, 50/60 Hz, IEC/EN 61000-4-8
SKU: sku-489
Weight: 57,3 kgDimensions: 550 x 2000 x 650 mmOperating Temperature: -10 °C to +40 °CSupply Voltage: 230 Vac ± 10 % - 50/60 Hz, 16 A max -
Rent IFI CDD1G Directional Coupler for EMC Applications 10 kHz - 1000 MHz, 100 W
SKU: sku-469
Weight: 1.0 lbCoupling: EMC ApplicationsCoupling factor: 40 dBFrequency Range: 10 kHz to 1 GHzGeneral Data: Technical DetailsImpedance: 50 ΩPower, nominal: 100 W -
Amplifier Research FI7000 Probe Interface
SKU: sku-438
Weight: without enclosure 2.5 kg (6.25 lb) with enclosure 7.25 kg (16 lb)Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.Communication: IEEE-488 (GPIB) USB 2.0, Test and Measurement class RS-232 (19200 Baud) Fiber Optic Serial (19200 Baud) reserved for connection to FM7004A Field Monitor Laser Fiber Optic Serial reserved for connection to one FL/PL 7000 series probeDimensions: without enclosure 48.3 x 4.5 x 25.4 cm (19.0 x 1.75 x 10.0 in) with enclosure 49.8 x 12.7 x 30.5 cm (19.6 x 5.0 x 12.0 in)RF Connector: (2) E2000 compact duplex female for probe communication and safety fiber loop (2) FSMA for fiber connection to FM7004AStandards Met: IEC/EN 61000-4-3Supply Voltage: 90-260 VAC, 50-60 Hz -
Narda PMM Rad-IS RF Radiated Immunity System for IEC/EN 61000-4-3
SKU: 10419
Application/Test Type: EMC RF/Radiated Susceptibility TestingConnector: BNC Input, Output Type N(f)Frequency Range: 9 kHz to 3 GHzImpedance: 50 OhmsInput: 115/230 V 50/60 HzStandards Met: IEC 61000-4-3 -
Inquire for Availability -
-
-
EM Test CWS 500N1 Continuous Wave Simulator for IEC 61000-4-6
SKU: sku-410
Weight: 17 kg (37.5 Pounds)Application/Test Type: Create and output RF currents as well as measure input for CDN and clamp calibration as well as current monitor for clamp applicationsDimensions: 19"/3 HUFrequency Range: Sinus (CW) 100kHz to 300MHz Frequency bands 100kHz to 9.999MHz 10MHz to 99.99MHz 100MHz to 300MHzImpedance: 50 OhmsInput: 115 V to 230 V +10/-15 %, 50/60 Hz (380 Watts Max)Maximum Continuous Power: 80W (nominal)Standards Met: IEC 61000-4-6Test Routines: Quick Start, User Test Routines, Standards Test Routines (IEC/EN 61000-4-6), Cal Procedure, ServiceVoltage Rating: 1 V to 30 Volts MaxInquire for Availability