The EMC Shop stocks IEC 61000 test equipment for compliance on commercial electronics. Rent, buy or lease test equipment for CE, UL or other compliant mark on your product. Even though there are thousands of standards for the variety of applications and industries, many EMC, EMI and RF tests refer back to the IEC/EN international compliance standards.International (IEC/EN) Categories
International (IEC/EN) Test Equipment, Systems & Solutions
-
Teseq (Schaffner) NSG 2050 System PNW 2050 w/ CDN 131/133
SKU: 11050
Standards Met: IEC/EN 61000-4-5, IEC/ISO 60601-1-2Applications: EMC Surge, CE Marking, Surge ImmunityMax EUT AC Voltage (W/ Built In CDN): 690 VoltsMax EUT AC Current (W/ Built In CDN): 32 AmpsMax EUT DC Voltage (W/ Built In CDN): 270 VoltsMax EUT DC Current (W/ Built In CDN): 16 AmpsCombination/Wave Surge Output Capability: 4.4 kVExternal Coupling: Data Lines (Surge), 3PH EUTWarranty: 100 DaysCondition (5-10 Scale): 8Equipment Group: Combination Wave GeneratorsTest Setup: Surge Immunity Test, Setup, Equipment$5,975.001 System Left -
Thermo Keytek E510A 10kV Surge Generator
SKU: 10799
Standards Met: ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5Phase synchronization: ±15° with optional coupler/decouplerPulse current (short circuit): 8/20µs, 0-5.05kA with 2 ohm effective source impedance, ±10%Pulse repetition: 1 shot/18 secondsPulse voltage (open circuit): 1.2/50µs, 0-10.1kV ±10% in 1 volt stepsRepetition time: Adjustable from 300ms to 5s; 1ms resolutionTypically In Stock -
3ctest CCC100 EFT/Burst Coupling Clamp for IEC/EN 61000-4-4
SKU: 10621
Application/Test Type: Electrical Fast Transients on Data Lines (EFT Burst)Cable Diameter: up to 40 mm (1.57 in)Coupling Length: 1 m (39.4 in)Dimensions: 1040x140x110mmEFT Coupling Clamps: as per IEC 61000-4-4RF Connector: High voltage connector,coaxial. GND connection 4 mm plug, bananaStandards Met: IEC/EN 61000-4-4Voltage Rating: up to 5.5kv4 to 6 Weeks -
Narda PMM COND-IS/10 RF Conductive Immunity Test System
SKU: 11334
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): 10VrmsBCI Test Levels (w/ built-in amplifier): 3VFrequency Range (w/ built-in amplifier): 150 kHz - 230 MHzTypically In Stock -
Thermo Keytek ECAT Transient Generator System
SKU: 11321
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864In Stock -
Schloder CWG 1500 Surge Generator, 4.4 kV, 2.2 kA, EN/IEC 61000-4-5
SKU: sku-783
Condition (5-10 Scale): 9Warranty: 6 MonthsCalibration: Fresh w/ Data at Time of OrderTest standard: IEC 61000-4-5Accessorries: CompleteInput: 120VAC/1PHPhase synchronization: 0 - 359°, step 1° net sync. triggeringPolarity: pos / neg / alternatePulse current (short circuit): 0.1 - 2.2 kAPulse voltage (open circuit): 0.2 - 4.4 kVTest duration: 10 - 990 sec$7,950.001 LEFT -
Com-Power CDN-M525E 5-Line Coupling Decoupling Network for Unscreened Power Lines
SKU: 10475
Current Rating: 25 Amps AC / 17 Amps DC (Max)Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)Frequency Range: 150 kHz to 230 MHzMains & EUT Connections: 4 mm shrouded banana socketsRF Connector: 50 Ω BNC (Female)RF Input Voltage: 40 V (Max)Standards Met: IEC / EN 61000-4-6Voltage Division Factor: 9.5 dB +4 / -1Voltage Rating: 250 V AC / 350 V DC (Line to Ground)$589.00 - $3,275.00In Stock -
MFG-1000 Magnetic Field Generator & Ripple Current Tester
SKU: 11959
Field Strength Range: 1000 A/m up to 1000 HzFrequency Rnange: DC to 250 kHzTest Standards: STD-461 (CE101, CS101, CS109), EN 61000-4-16, IEC / EN 61543Inquire for Availability -
Rent CE Marking Conducted Immunity Transient Test System
SKU: 10671
Application/Test Type: CE Marking - Safety and EMC DirectivesStandards Met: IEC 61000-4-4, EN 61000-4-5, and moreGeneric Standards: IEC 61000-6-1, IEC 61000-6-2In Stock -
3ctest Voltage Dips & Power Frequency Module (VMT, VVT, MFT)
SKU: sku-565
Applications: EMC Precompliance Testing, Conducted ImmunityTest Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29Compatible Transient Generators: 3ctest CCS 600Inquire for Availability -
Amplifier Research (AR) FL7006 Electric Field Probe Kit, 100 kHz - 6 GHz
SKU: 57543
Application/Test Type: Monitoring Electric Field StrengthsField Strength Range: 0.5 to 800 V/m (0.01 V/m)Frequency Range: 100 kHz to 6 GHzStandards Met: IEC/EN 61000-4-3Interfaces: USB, IEEE-488 (GPIB), RS-232 (serial), Fiber-Optic SerialBattery Life: 60-80 hoursTypically In Stock -
Teseq NSG 1007 Programmable AC and DC Power Sources for IEC 61000-3-2 and -3-3
SKU: 11494
Test Standards: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11Application/Test Type: Medical Device EMC TestingsInquire for Availability