CISPR Standards

CISPR Standards Test Equipment, Systems & Solutions

• 

  Rigol EMI Precompliance Test Equipment Bundle

  SKU: 11165

  Applications: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

  Limit Lines: CISPR 11, MIL-STD-461, FCC Part 15 and more

  Bundle Includes: DSA710, EMI-DSA800, NFP-3, S1210 EMIs, interconnect cables

  Frequency Range: 100 kHz to 1 GHz

  Cost New:

  Was:

  Price Now:

  $259.00 - $1,295.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Com-Power LI-3P-200 Series 3-Phase LISN's with 50/250 uH Inductor, FCC/EN/CISPR, up to 100 A, 150 kHz - 30 MHz

  SKU: sku-603

  Weight: 27.5 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: up to 100 Amperes

  Dimensions: 19.3” x 13.9” x 2.3"

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 µH or 250 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  VIEW PRODUCT Cart

• 

  Com-Power LI-3P-132 150kHz to 30MHz Three-Phase Line Impedance Stabilization Network

  SKU: sku-598

  Weight: 30 lbs.

  Application/Test Type: Power Line Conducted Emissions Tests

  Current Rating: 32 Amperes

  Frequency Range: 150 kHz to 30 MHz

  Inductors: 50 µH

  Insertion loss: less than 0.7 dB

  Isolation: more than 40 dB

  Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

  RF Connector: RF Measurement Port 50Ω - N-Type (female)

  Standards Met: ANSI C63.4, CISPR 16-1-2

  Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

  Cost New:

  Was:

  Price Now:

  $6,495.00

  ORDERING OPTIONS

• 

  Teseq ISN T4A Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: sku-159

  Frequency Range: 150 kHz to 80 MHz

  RF Input Voltage: 15 V

  VIEW PRODUCT Cart

• 

  Teseq ISN T8 Impedance Stabilization Network (ISN) for Unscreened Balanced Pairs

  SKU: 10161

  Weight: 550 grams (1800 grams with storage case)

  Application/Test Type: 1000BaseT and Power Over Ethernet (PoE) testing of 1 up to 4 pair(s) of unscreened balanced communication lines

  Common Mode Impedance: 150 Ω ±20 Ω

  Current Rating: 600 mA (line), 1200 mA (pair)

  Decoupling of Common Mode Disturbance: ≥35 dB to ≥55 dB/≥55 dB

  Dimensions: 10.5 cm x 6.5 cm x 11.0 cm (19.0 cm with adapter plugged in)

  Frequency Range: 150 kHz to 30 MHz

  Mains & EUT Connections: Adapter Set includes RJ11, RJ45, LCL and more.

  RF Connector: BNC 50 Ω

  RF Input Voltage: 15 V max

  Standards Met: CISPR 15; CISPR 16-1-2; CISPR 16-2-1;CISPR 22; CISPR 32; EN 61000-6-3; EN 61000-6-4

  Voltage Division Factor: 10 dB ±1 dB

  Voltage Rating: 63 Volts AC, 100 Volts DC (line to ground); Test Voltage: 200VDC, 2 seconds

  T

  VIEW PRODUCT Cart

• 

  Rent Rohde & Schwarz ESU40 EMI Test Receiver for CISPR and MIL-STD Testing

  SKU: 30082

  Frequency Range: 20 Hz to 40 GHz (DC coupled), 10 MHz to 40 GHz (AC coupled)

  Frequency Resolution: 0.01 Hz

  Frequency Counter Resolution: 0.1 Hz to 10 kHz

  Test Standards: CISPR 16-1-1, MIL-STD-461

  Applications: Conducted Emissions, Radiated Emissions

  Inquire for Lead Time

  VIEW PRODUCT Cart

• 

  Schwarzbeck ISN S8 Impedance Stabilization Network

  SKU: 8857

  Connector to EUT: RJ45 connector | CAT 6 Cable

  Max Voltage Handling: 150 VDC | 100 VAC

  Max Current Handling: 1 Amp

  Standards Met: CISPR 22, CISPR 32, EN 55022

  Application: Shielded Data Lines Conducted Emissions Measurements

  Cost New:

  Was:

  Price Now:

  $1,800.00

  In Stock

• 

  Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines

  SKU: sku-172

  Weight: approx. 1.5 kg

  Dimensions: (W x H x D): 100 mm x 100 mm x 240 mm

  Frequency Range: 150 kHz to 230 MHz

  Impedance: 150 Ω ±20 Ω

  RF Input Voltage: 20 V

  VIEW PRODUCT Cart

• 

  CISPR 25 ALSE Test Chamber Build & Install

  SKU: 11326

  Frequency Range: DC - 40 GHz

  Isolation: 100-110 dB typical (75 dB min in the Magnetic Field)

  1-6 Months

  VIEW PRODUCT Cart

• 

  AMA60M100H Low Frequency Active Monopole 100 Hz - 60 MHz for MIL-STD, FCC, VDE and TEMPEST Testing

  SKU: 8658

  Antenna Factor (1 Meter): 0 dB/m

  Application/Test Type: Active, general-purpose, receive-only antenna for FCC, MIL-STD-461, and TEMPEST Testing

  Connector: BNC (female)

  Dimensions: Ground Plane Dimensions: 18 in. X 18 in. (45.7 cm x 45.7 cm) Optional 24" (60cm) is available Rod Length: 8.5 in. - 43 in. (21.6 cm x 109.2 cm)

  Frequency Range: 100 Hz to 60 MHz

  Impedance: 50 Ω

  Mounting Base: 1/4" 20 thread

  Standards Met: MIL-STD-461, VDE, FCC Part 15

  Cost New:

  Was:

  Price Now:

  $350.00 - $3,525.00

  In Stock

  ORDERING OPTIONS

• 

  HVSB-200A High Voltage Shielded Box for LISNs/AMNs

  SKU: 8220

  Applications: Automotive EMC testing

  Test Standards: ISO 7637-4, CISPR 25

  Shielding Effectiveness: typ. > 100 dB

  Connectors: RF-N

  Material: Aluminum

  Cable cross section: 6-16 mm²

  Diameter HV-cable (measured at shield): 5-9 mm

  Wrench size HV-cable feedthrough: 17 mm

  IN STOCK

  VIEW PRODUCT Cart

• 

  Com-Power AM-741 Active Monopole Antenna, 9 kHz - 30 MHz

  SKU: sku-237

  Weight: 19 lbs. (8.6 kg)

  Antenna Factor (1 Meter): ±1 dB

  Antennas: Monopole Antennas

  Aperture: -

  Application/Test Type: Electric field emission measurements below 30 MHz per Military standards (MIL-STD-461) and FAA (DO-160) specifications

  Connector: BNC (female)

  Dimensions: Collapsible Element Length: 41 inches (fully extended); Base Plate: 24 x 24 inches (60 x 60 cm)

  Frequency Range: 9 KHz - 30 MHz

  Gain: See Image Thumbnail

  Impedance: 50 Ohms

  Mounting Base: 1/4" 20 thread

  Standards Met: Mil-STD 461,DO-160

  VIEW PRODUCT Cart