ISO 11452-5 Turn Key Solution for Stripline Immunity EMC Tests

ISO 11452-5 Turn Key Solution for Stripline Immunity EMC Tests

Online Orders Ship Same Day

 

SKU:
sku-462

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

Overview

ISO 11452-5 Overview

The ISO 11452-5 specifies electromagnetic compatibility measurement procedures for vehicle components immunity to radiated electro magneticfields, 10kHz to 200MHz stripline method.

Strip Lines are made for the generation of homogeneous electromagnetic fields and specified in ISO 11452-5 and EU guidelines 95/94. The strip lines can be used for testing of electrical/electronic submodules (EUB) and their associated cables.

Turn Key Solution for ISO 11452-5 Includes:

The EMC Shop can provide a variety of combinations from our trusted manufactures to satisfy 11452-5 testing specifications. Equipment combinations include but not limited to the following:

Equipment Required (as per ISO 11452-5) Equipment Solution(s)
Power Amplifier

Teseq CBA 400M-110 Broadband Amplifier

Teseq CBA 1G-030B

Teseq CBA 1G-070B

Teseq CBA 1G-150B

Teseq CBA 1G-300B

Teseq CBA 100M-110

EM Test CWS 500N2.2

EM Test CWS 500N2.3

Signal Generator

Teseq NSG 4070B
RF Coupler Teseq DCP 0100 Dual Directional Coupler
Stripline

Teseq SL 50

Teseq SL 90

Teseq SL 150

Related EMC Equipment & Solutions

3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω

3ctest D1550 Stripline for ISO 11452-5 Road Vehicles, 50Ω

SKU: sku-562

Connector type: N 50 Ω
Dimensions: 4.30 x 1.5x 1.05 m, .95 m table height
Distance between the plates: 150 mm
Frequency range: 0 GHz - 1 GHz
Max. input power: 1000 W
Standards Met: ISO 11452-5
Stripline: Conform with ISO 11452-5
Typical impedance: 50 Ω
Typical VSWR (30 - 1000 MHz): Better than 1.22
View Product Cart
Thermo-Keytek EMCPro Plus EMC Test System - The EMC Shop

Thermo Keytek EMCPro Plus EMC Immunity Test System

SKU: 11054

Test Capabilities: Surge Immunity (Combo/Ring/Telecom Waves), EFT/Burst, Dips Interrupts & Variations
Max EUT Voltage (w/ Built in CDN): 250 Volts
Max EUT Current (w/ Built in CDN): 16 Amps
EFT/Burst Pulse Output Capability: 4 kV
Combination/Wave Surge and Ring Wave: 6 kV
$1,695.00
In Stock
Ordering Options
Schaffner BEST EMC Precompliance Conducted Immunity Test System - The EMC Shop

Schaffner BEST EMC Precompliance Conducted Immunity Test System

SKU: sku-347-1

Peak inrush current capability: 500 A Peak
Pulse amplitude: Adjustable voltage range: 250 V to 4400 V Voltage amplitude into 50 Ohms: 125 V to 2000 V (± 10%) Voltage amplitude into 1000 Ohms: 250 V to 4000 V (± 20%)
Pulse current (short circuit): 125 A to 2000 A
Standards Met: IEC 61000-4-4, 61000-4-5, 61000-4-11, 61000-4-29
Was:
$14,500.00
$11,900.00
In Stock
Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

Em Test CWS 500N3 Test Generator for Mil-STD-461, ISO 11452 and More

SKU: sku-253

Weight: Approx. 36kg
Amplifiers: low-frequency signal source with amplifier
Dimensions: 19"/6HU (555mm x 448mm x 286mm)
Frequency range: 10Hz - 250kHz
General Data: Technical Details
Harmonic Distortion (THD): less than -20dBc at 100W power 0.5ohm
Operating Temperature: 10°C - 40°C
Signal current: Max. 15A rms
Signal level: 0.001V - max. 7Vrms (14Vrms)
Signal power: 100W (nominal)
Supply Voltage: 115V or 230V +10/-15%, 50/60Hz
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form