Standards by Product/Industry Categories
Standards by Product/Industry Test Equipment
-
LANGER P512 RF Power Injection and Measurement IEC 62132-4
SKU: 30056
High power injection: 2 W at 12 GHzRF-Measurements: Up to 12 GHzAttenuation: Less than 3 dB up to 12 GHzSWR: lower than 2Scope of delivery: P512 (RF probe), SMA-SMA 1m cable 18 GHz HS (high performance microwave cable with SMA), Power Supply UnitTypically In Stock -
-
EM Test PFS 500 Power Fail Simulator for EN/IEC 61000-4-11
SKU: 1144
Test Standards: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: Voltage dips, Voltage interruptions, Voltage variations, Inverse, EMC Precompliance Testing, Conducted ImmunityEUT Power Handling: AC up to 240V/16A$4,750.001 Unit -
Teseq CDN 3083-Burst 1000 Volt, 100-200 Amp Coupler for EFT/Burst
SKU: sku-221
Weight: 11 kg (24 lbs)Application/Test Type: EFT/Burst immunity testing of equipment requiring large currents, specially designed for heavy industry, smart grid and electro vehicle applications.Current Rating: 100 Amp or 200 Amp continous depending on modelCompatible Impulse Generators: Any EFT/Burst Generators (custom HV cable may be required)Mains & EUT Connections: SHV; Screw terminals, rated for 200 A$395.00 - $495.00In Stock -
3ctest CWS 800 8kV Surge Combination Wave Simulator for IEC/EN 61000-4-5 up to 8 kV
SKU: sku-797
Weight: Approx 30 kg (66 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: Single Phase Built in, 16A, 250VAC, 120VDCDimensions: 19 inch/6uImpedance: 2 Ohm -
Rent Amplifier Research AR 25A250AM6 1-300 MHz, 25 Watt RF Power Amplifier
SKU: 11305
Max Frequency: 250 MHzMin Frequency: 9 kHzOutput Power: 25 WattsApplications: RF Conducted Immunity, MedicalStandards: IEC 61000-4-6, MIL-STD 461 CS114$195.00 - $995.00 -
Teseq NSG 4070B Conducted & Radiated Immunity Test System
SKU: 11159
Test Capabilities: RF Conducted ImmunityStandards Met: IEC/EN 61000-4-6Applications: Radiated Immunity Debugging, CE Marking, Medical Devices, Industrial Machinery, Electronics & ITCDN Test Levels (w/ built-in amplifier): NoneBCI Test Levels (w/ built-in amplifier): NoneTypically In Stock -
3ctest CWS 1000N 10kV Surge Generator for IEC/EN 61000-4-5
SKU: sku-798
Weight: Approx 44 kg (97 lbs)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Dimensions: 19 inch/6uImpedance: 2 OhmPhase synchronization: 0°-360°, 1°step or random -
Teseq ISN S501A Impedance Stabilization Network for Coaxial Lines
SKU: sku-171
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Schwarzbeck ISN S8 Impedance Stabilization Network
SKU: 8857
Connector to EUT: RJ45 connector | CAT 6 CableMax Voltage Handling: 150 VDC | 100 VACMax Current Handling: 1 AmpApplication: Shielded Data Lines Conducted Emissions Measurements$1,800.00In Stock -
Teseq ISN S502A Impedance Stabilization Network for Coaxial Lines
SKU: sku-172
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts
SKU: sku-219
Application/Test Type: Automated Surge Immunity TestingCurrent Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41Voltage Rating: 480 VAC rms Line to LineInquire for Availability