Test Equipment, Systems & Solutions

• 

  ISO 11452-5 Turn Key Solution for Stripline Immunity EMC Tests

  SKU: 10462

  Test Standards: ISO 11452-5

  Frequency Range: DC - 1 GHz

  Applications: Automotive EMC Testing, Electric Vehicle and Battery EMC Testing

  Inquire for Availability

  View Product Cart

• 

  ISO 11452-3 Transverse Electromagnetic (TEM) Cell Test System

  SKU: 10461

  Frequency Range: 0.01 MHz to 500 MHz

  Test Severity Levels: 200 V/m or more

  Normative References: ISO 11452-1

  Automotive EMC Standard: ISO 11452-3

  Inquire for Lead Time

  View Product Cart

• 

  ISO 11452-4 Turn Key Solution for Harness Excitation Methods (BCI and TWC)

  SKU: 10459

  Test Capabilities: RF Conducted Immunity

  Standards Met: ISO 11452-4

  Applications: Automotive Component Disturbance Testing

  BCI Test Levels (w/ built-in amplifier): 1000mA

  Frequency Range (w/ built-in amplifier): 9 kHz - 1 GHz

  Typically In Stock

  View Product Cart

• 

  PMM (Narda) RF-300 Large Loop Antenna System (LLAS) for EN 55015 (CISPR - 15)

  SKU: sku-458

  Antenna Factor (1 Meter): According to CISPR 16-1-4 Annex C

  Antennas: Loop Antennas

  Connector: BNC

  Construction: Wood & plastic tubes, collapsible

  Dimensions: Height: 2,6 mX- Y Width: 2,1 m Distance to ground: min. 0,5 m

  Frequency Range: 9 kHz to 30 MHz

  Impedance: 50 Ohm

  Standards Met: EN 55015 section 9.1.1 & CISPR 16-1-4 Annex C

  View Product Cart

• 

  PMM (Narda) AS-05 Broadband Antenna Set, 30 MHz - 18 GHz

  SKU: sku-457

  Weight: 1.8/1.1/.25 kg.

  Antenna Factor (1 Meter): 8 to 14 dB/m typical/12 to 40 dB/m typical/36 to 41 dB/m typical

  Antennas: (BC-01, LP-04, DR-01)

  Application/Test Type: Radiated EMC

  Connector: N-Type(female)

  Construction: aluminum

  Dimensions: see description

  Frequency Range: 30 MHz - 200 MHz/200 MHz to 6 GHz/6 to 18 GHz

  Gain: -15 +2 dBi typical/6 dBi typical/9 to 16 dBi typical

  Impedance: 50 Ω nominal

  Max input power: 100/100/150W

  Maximum Continuous Power: 100 Watts up to 1 GHz (75 watts up to 6 GHz)

  View Product Cart

• 

  Com-Power LIT-930A 9kHz to 30MHz Transient Limiter

  SKU: 8409

  Connector: N type (input and output)

  Dimensions: L 4.3” (100 mm) W 2.0” (50 mm) H 1.5” (35 mm)

  Frequency Range: 9 kHz - 30 MHz

  Input: 4 Watts CW (+36 dBm) ±50 Vdc

  Insertion Loss: 10 dB +1.5 / -0.5 dB*

  VSWR: 1.1:1

  Cost New:

  Was:

  Price Now:

  $650.00

  Typically In Stock

  Ordering Options

• 

  Com-Power LIT-153A 150kHz to 30MHz Transient Limiter

  SKU: sku-446

  Connector: N type (input and output)

  Dimensions: L 3.0” (75 mm) W 1.25” (32 mm) H 1.25” (32 mm)

  Frequency Range: 150 kHz - 30 MHz

  Input: 2 Watts CW (+33 dBm) ±10 Vdc

  Insertion Loss: 10 dB +1.5 / -0.5 dB*

  VSWR: 1.1:1

  Cost New:

  Was:

  Price Now:

  $430.00

  Ordering Options

• 

  Amplifier Research FI7000 Probe Interface

  SKU: sku-438

  Weight: without enclosure 2.5 kg (6.25 lb) with enclosure 7.25 kg (16 lb)

  Application/Test Type: Monitoring electric field strengths in GTEM's, Anechoic Chambers and other RF rooms for radiated immunity testing.

  Communication: IEEE-488 (GPIB) USB 2.0, Test and Measurement class RS-232 (19200 Baud) Fiber Optic Serial (19200 Baud) reserved for connection to FM7004A Field Monitor Laser Fiber Optic Serial reserved for connection to one FL/PL 7000 series probe

  Dimensions: without enclosure 48.3 x 4.5 x 25.4 cm (19.0 x 1.75 x 10.0 in) with enclosure 49.8 x 12.7 x 30.5 cm (19.6 x 5.0 x 12.0 in)

  RF Connector: (2) E2000 compact duplex female for probe communication and safety fiber loop (2) FSMA for fiber connection to FM7004A

  Standards Met: IEC/EN 61000-4-3

  Supply Voltage: 90-260 VAC, 50-60 Hz

  View Product Cart

• 

  Amplifier Research 200T4G8 200 Watt Amplifier, 4 - 8 GHz

  SKU: sku-436

  Flatness: ±6 dB maximum at rated power

  Frequency Range: 4-8 GHz instantaneously

  Gain: Max Range: 53 dB; Continous Range: 35 dB

  Impedance: 50 ohms, VSWR 2.0:1 maximum

  Output: Nominal: 262 watts Minimum: 200 watts Linear @ 1 dB Compression: 100 watts minimum

  RF Connector: Type N female

  RF Input Voltage: 1.0 milliwatt maximum for rated output

  View Product View Product

• 

  Com-Power CGC-510E Comb Generator 100 kHz - 400 MHz

  SKU: sku-432

  Weight: 1 lbs / 0.5 kg

  AC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 Hz

  Application/Test Type: Reference Signal Source for LISN verification

  Battery: 6V NiMH, 1 Ah

  Dimensions: 5 x 2.2 x 2.2 inches / 13.2 x 5.9 x 5.9 cm

  Frequency Range: 100 kHz to 400 MHz in 100 kHz or 500 kHz

  Mains & EUT Connections: LISN Interface Plug NEMA 15-P type

  Operation Time: 18 Hours Typical With Fully Charged Battery

  View Product Cart

• 

  Com-Power CGO-51000 Comb Generator 1 GHz - 40 GHz 1 GHz steps

  SKU: 43011

  Weight: 2.5 lbs (1.1 kg)

  AC Power Adapter: 6 VDC 500 mA

  Antennas: Integral Stub-type (w/protective cover)

  Application/Test Type: Radiated Reference Signal Source (for OATS, SAC, FAC, etc.)

  Battery: 6V NiMH, 1 Ah

  Dimensions: 7 in. x 1 in. (17.8 cm x 2.5 cm)

  Frequency Range: 1 GHz to 40 GHz in 1 GHz steps

  Operation Time: 18 Hours Typical With Fully Charged Battery

  Polarity: Vertical, Horizontal

  Inquire for Availability

  View Product Cart

• 

  Com-Power CGO-5100B Comb Generator 1 GHz - 18 GHz 100 MHz step

  SKU: sku-429

  Weight: 1 lbs / 0.5 kg

  AC Power Adapter: 6 VDC, 500A

  Antennas: Built in

  Application/Test Type: EMI Radiated Site Reference Source

  Battery: 3.6 V, NimH

  Dimensions: 8 x 1 inches / 19.2 x 2.4 cm

  Frequency Range: 1 to 18 GHz in 100 MHz steps

  Operation Time: 18 Hours Typical With Fully Charged Battery

  View Product Cart