Categories
Test Equipment, Systems & Solutions
-
-
-
Radiated Immunity Test System
SKU: 10019
Frequency Range: 80 MHz - 18 GHzCW Field Strength Levels (@ 3m): 60V/m (30 V/m w/ 80% AM)CW Field Strength Levels (@ 1m): 200 V/mTest Standards: MIL-461 RS103, IEC/EN 61000-4-3, ISO 11452-2, DO-160 Section 20Applications: Radiated Immunity & SusceptibilityShipping: Setup and Configured in 1-2 WeeksGeneric Standards: IEC 61000-6-1, IEC 61000-6-24-6 Weeks -
In Stock
-
RFCI-MIL RF Conducted Susceptibility Generator for BCI Testing
SKU: 11915
Application/Test Type: Bulk Current Injection (BCI) Testing, Conducted Susceptibility TestingFrequency Range: 10 kHz - 250 MHzConnectors: EUT Monitors, N type, SMA and BNC, Ethernet, USBStandards Met: MIL-STD-461 CS114, IEC 61000-4-6AC Power Input: 100 to 240 V 50/60 HzSoftware: Pre-programmed test routines for military EMC testingTypically In Stock -
CP-CF Calibration Fixture for Current Probes
SKU: 11911
Max Probe Girth: 2.75"Fits Probe Arpetures: 1.25" to 1.75"Frequency Range: 20 Hz - 500 MHzInsertion Loss: < 2dBConnetors: N(f)Applications: Conducted Immunity/Susceptibility Test SetupTest Standards: IEC/EN 61000-4-6, ISO 11452-4In stock -
ETS-Lindgren 3164-04 Diagonal Dual Polarized Horn Antenna
SKU: sku-1907
Frequency Range: 700 MHz - 6 GHzApplications: Antenna Pattern Measurements, EmissionsTest Standards: IEC 61000-4-3Gain: 6 - 14 dBi -
Turnkey Antenna Pattern Measurement System and Chamber
SKU: TAPMSC
Frequency Range: DC - 110 GHzIsolation: >100 dBInquire for Lead Time -
RF Screen Room Test Kit
SKU: 988
Weight: 26 lbFrequency Range: 95 kHz (Crystal Controlled)Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycleReceiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dBTransmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy$595.00 - $7,950.00One Unit Left! -
RF/EMI Shielding Effectiveness Testing
SKU: sku-1900
Weight: 26 lbFrequency Range: 95 kHz (Crystal Controlled)Output Signal: Pulse modulated at approximately 600 Hz and has a 50% duty cycleReceiver: Two meter scales for high and low operation Aural output for headphone operation Battery operated for portable use Dynamic range of 120dBTransmitter Output: 1 Ampere RMS into an inductive load from approximately 5–50 μHy -
York CNE III Comparison Noise Emitter, 9 kHz - 3.5 GHz
SKU: sku-1896
Weight: 1 lbs. / 0.48 kgAC Power Adapter: 6 VDC, 500 mA / 110VAC 60 Hz or 230 VAC 50 HzApplication/Test Type: EMI Radiated Site Reference SourceFrequency Range: 9kHz to 3.5GHz outputOperation Time: 12 Hours Typical With Fully Charged BatteryPolarity: Vertical and HorizontalTypically In Stock -
ETS-Lindgren 3301C Active Monopole Antenna
SKU: 21894
Max Frequency: 50 MHzMin Frequency: 30 HzApplication/Test Type: Receive-only antenna for Radiated Emissions, Military EMC, Precompliance EMC tesingConnector: BNC (female)Impedance: 50 OhmsStandards Met: FCC Part 15, MIL-STD-461, TEMPEST testsAntenna Factor: -3 dBm - 13 dB/m$345.00 - $3,975.00Inquire for Availability