Test Equipment, Systems & Solutions

• 

  3ctest CWS 600CT Combination Wave & Telecom Surge Simulator, 1.2/50us 8/20us 10/700us 5/320us

  SKU: sku-333

  Polarity: Positive, Negative or Alternate

  Weight: Approx 15 kg (33 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Counter: 1-999

  Coupling: Optional for external SPN series CDN's

  Dimensions: 19 inch/6u

  Frequency Range: 50/60Hz±5%

  Front Time: Voltage: 10us±20%, time to half value: 700us±20%;

  Impedance: 2 phm, Optional 12 ohm and 500 ohm

  Mains & EUT Connections: 4mm banana plug

  Output Current: Front time: 5us±20%, time to half value: 320us±20%

  Polarity-2: Positive, Negative and Alternating

  Pulse current (short circuit): 0.15 kA–3.0kA ±10% （2ohm）

  Pulse Duration: 11s-99s （shortest depends on test voltage）

  Pulse repetition: 1-999

  Pulse voltage (open circuit): 0.3kV–6.0kV ±10%

  RF Connector: BNC, 5VTTL

  Standards Met: UL 1449, ANSI C62.41, IEC 61000-4-5, EN & IEC 60255-5, GB/T 17626.5

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test duration: 6s-99s

  Test Voltage: 0.2kV–6.0kV,±10%

  Transfer Impedance: 15ohm, 40ohm （automatic switch)

  Voltage Rating: AC 110V/220V , ±10%,

  View Product Cart

• 

  Teseq ISN PLT-A Impedance Stabilization Network (ISN) for Power Line Telecommunication (PLT)

  SKU: sku-175

  Weight: approx. 1450 g

  Dimensions: (W x H x D) in mm: 185 x 100 x 100

  Frequency Range: 1.6 MHz to 30 MHz

  Impedance: 25 Ω ±3 Ω

  Isolation: 55 dB

  View Product Cart

• 

  Teseq ISN PLT Impedance Stabilization Network (ISN) for Power Line Telecommunication (PLT)

  SKU: sku-176

  Weight: approx. 1450 g

  Dimensions: (W x H x D) in mm: 185 x 100 x 100

  Frequency Range: 1.6 MHz to 30 MHz

  Impedance: 25 Ω ±3 Ω

  Isolation: 55 dB

  View Product Cart

• 

  Electrical Fast Transient (EFT) Burst Immunity Component Level Test Setup

  SKU: 30044

  Bandwidth: DC to 500 kHz

  Sampling Rate: 3 Msps

  Resolution: 12 bit

  Applications: Burst/EFT Testing, EMC Precompliance Testing

  Test Standards: 61000-4-4

  In Stock

  View Product Cart

• 

  Haefely PSURGE 10/700us Telecom Impulse Test System

  SKU: sku-248

  Polarity: Positive and Negative

  Telecom Surge: As per FCC part 68, Pulse B, IEC 61000-4-5, ITU and ETSI recommendations

  Test Voltage: 0.20 – 7.4kV ±10%

  In Stock

  View Product Cart

• 

  Schwarzbeck NSLK 8128 Line Impedance Stabilization Network

  SKU: 12230

  Frequency Ranges: 9 kHz - 30 MHz

  Max. Voltage: 250 V AC (50 Hz/ 60 Hz); 400 V DC

  Pre-Filter Choke: 250 µH

  Test Standards: CISPR 16-1-2

  Inquire for Availability

  View Product Cart

• 

  APREL Helmholtz Coil

  SKU: 30147

  Field Level: 100 x current through the coils

  Coil Radius: 142mm, 118 mm, 93 mm

  Wire: AWG24 enameled magnet wire

  Number of Turns (per coil): 20

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Lead Time

  View Product Cart

• 

  Teseq NSG 3150 Combination Wave Surge Generator for IEC/EN 61000-4-5 up to 15 kV

  SKU: 10795

  Weight: Approx. 40 kg (88 lbs)

  Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5

  Coupling: IEC/external

  Dimensions: 449 (17.7”) x 328 (12.9”; 7 HU) x 565 mm (22.2”)

  Display Interface: 7“ touch-screen

  Impedance: 2/12 Ω

  Phase synchronization: asynchronous, synchronous 0 to 359º (in 1º steps)

  Polarity: pos / neg / alternate

  Pulse current (short circuit): ±250 A to 7.5 kA

  Pulse repetition: 20* .... 600 s (in 1 sec steps) 1 .... 10 min.

  Pulse voltage (open circuit): ±500 V to 15 kV (in 1 V steps)

  Supply Voltage: 85 to 265 VAC, 50/60 Hz

  Test duration: 1 to 9999 pulses, continuous

  Equipment Group: Combination Wave Generators

  Test Setup Overview: Surge Immunity Test, Setup, Equipment

  View Product Cart

• 

  Teseq CDN 3063-S100 Automated Surge CDN Coupler - 3 Phase, 100 Amp, 480 Volts

  SKU: sku-219

  Application/Test Type: Automated Surge Immunity Testing

  Current Rating: 3 x 100 Amp continuous (peak 3 x 150 Amp for 30 min.)

  Mains & EUT Connections: HV-surge pulse input from generator (Fischer connector); Connector for EUT supply input (Screw terminals Phoenix); Connector for EUT supply output (Screw terminals)

  Standards Met: IEC / EN 61000-4-5:2005, ANSI C62.45, IEC / EN 61000-4-12:2006 and ANSI C62.41

  Voltage Rating: 480 VAC rms Line to Line

  Inquire for Availability

  View Product Cart

• 

  Teseq INA 6502 PQF/Dip Transformer for NSG 3060

  SKU: 3955

  Test Standards: IEC/EN 61000-4-11

  Compatible Generators: Teseq NSG 3060, Teseq NSG 3040

  Applications: Conducted Immunity

  Cost New:

  Was:

  Price Now:

  $549.00

  In stock

  Ordering Options

• 

  Schwarzbeck VULP 9118 H Log Periodic Antenna

  SKU: sku-1829

  Frequency Range: 30 MHz - 1.3 GHz

  Isotropic Gain: 6.2 dBi + / - 1.2 dB

  Antenna Factor: -6 - 31 dB/m

  Max. Input Power: 2000 W (30 MHz), 300 W (1 GHz)

  Cross Polarisation: >20 dB (30 MHz...1 GHz)

  Inquire for Availability

  View Product Cart

• 

  Amplifier Research AT3000 E Field Generator

  SKU: sku-1731

  Applications: Radiated Susceptibility

  Built in Load: No

  Frequency Range: 10 kHz - 30 MHz

  Max Radiated Field Strength: 135 V/m

  View Product Cart