Categories
Test Equipment
-
Haefely PCD 130 3 Phase Coupling/Decoupling Network for PSURGE 8000
SKU: sku-444
Weight: 69 kg (net weight)Combination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 3 Phase - 32 Amps, 690 VACDimensions: 45 x 50 x 57 cm (W x H x D)General Data: Technical DetailsIn Stock -
EM Test OCS 500N6F Simulator for Fast/Slow Damped Oscillatory Waves and Ringwave
SKU: 10413
Burst duration: 50 ms ±20%, at 3 MHz 15 ms ±20%, at 10 MHz 5 ms ±20%, at 30 MHzDamping Rate: Peak 5 to be more than 50% of peak 1 value Peak 10 to be less than 50% of peak 1 valueOscillation Frequency: 3 MHz, 10 MHz and 30 MHz, ±10%Source Impedance: 50 ohm ±20%Voltage: Voltage (o.c.) at HV output 450 V - 4,400 V ±10%Inquire -
3ctest SG 5010H 10kV Surge Simulator for IEC 61000-4-5, GB/T, ITU-T K21/K44
SKU: sku-326
Polarity: +/-, positive first or negative firstWeight: Approximately 300 kgCombination wave pulse 1, 2/50 - 8/20 μs (Hybrid-Surge pulse): Pulse conforms to IEC/EN 61000-4-5Coupling: 1 or 3 Phase 16 Amps 250V/450VImpedance: 500Ω±10％ -
Teseq ISN S752 Impedance Stabilization Network for Coaxial Lines
SKU: sku-174
Weight: approx. 1.5 kgDimensions: (W x H x D): 100 mm x 100 mm x 240 mmFrequency Range: 150 kHz to 230 MHzImpedance: 150 Ω ±20 ΩRF Input Voltage: 20 V -
AE Techron 4301 DC Voltage Variations and Telecom Transients Test System
SKU: 44557
Test Standards: GR-1089 Section 10 and ATIS-0600315.2007Maximum Continuous DC Current (±50 VDC): 60-240 Amps (model dependent)Maximum Pulse DC Current (up to ±100 VDC): 200-800 Amps (model dependent)Voltage Gain: 20Maximum Input Voltage: ±10V, unbalancedInquire for Availability -
QRHA4G-OB Dual Polarized Quad Ridged Open Boundary Antenna
SKU: 12343
Frequency Range: 1 - 4 GHzIsotropic Gain: 8 dBiPort Isolation: 20 dBApplications: Antenna Pattern Measurements, Emissions$4,650.00Inquire for Availability -
ETS-Lindgren (EMCO) 3107B E-Field Generating Antenna
SKU: 2187
Applications: Radiated SusceptibilityDimensions: 72.5" x 24" x 2.0" (L x W x H)Frequency Range: 10 kHz - 30 MHzBuilt in Load: NoMax. Radiated Field Strength: 100 V/m1 Unit Left -
ETS-Lindgren HI-6005 Electric Field Probe
SKU: sku-1294
Application/Test Type: Radiated ImmunityField Strength Range: 0.5 to 800 V/mFrequency Range: 100 kHz to 6 GHzStandards Met: IEC 61000-4-3Interfaces: Fiber Optic -
Teseq ITS 6006 Radiated Immunity Test System
SKU: 11290
Frequency Range: 80 MHz to 6 GHzInput: External AM input: BNC socket, impedance more than 10 kΩ External PM input: BNC socket, TTLOutput: Generator outputs: 4x N sockets 50 Ω, 80 MHz to 6 GHz Interlock outputs: 4x BNC sockets External PM output: BNC socket, TTL, impedance more than 1.2 kΩ 10 MHz reference output: BNC socket, approx. 0 dBm/50 ΩReference frequency: 10 MHzApplications: RF/Radiated Immunity & Susceptibility Testing$1,975.00 - $18,000.00In Stock -
Rent Com-Power ISN-T8 for One, Two, Four, Unshielded Balanced Pair, CAT-3, CAT-5
SKU: 30150
Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]Current Rating: 800 mA (per line), 1.6 Amps (per pair)Dimensions: see photo in imagesFrequency Range: 150 kHz to 30 MHzIsolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB$410.00 - $4,100.00Typically in Stock -
3ctest SPN Series CDN's for Lightning Surge, Single Phase 3-wire, Three Phase 5-wire
SKU: sku-563
Weight: approx. 50KgDimensions: 19 inch/6UImpedance: 2 ohm (output)Polarity: +/-/alternativeVoltage: 0.2kV–6kV，±10%Inquire for Availability -
EM Test Automotive Transient Emission Set for ISO 7637-2
SKU: 30011
Applications: EV and AutomotiveTest Standards: ISO 7637-2Includes: AN 200N100 Artificial Network, BS 200N100.1 Electronic Switch, and BSM 200N40 Mechanical Switch (see specs in Overview)Inquire for Availability