RF Test Equipment

(Showing 12 of 251)

RENTALS SHIP SAME DAY

The EMC Shop has a large inventory of RF test equipment. Typically equipped with options suitable for compliance testing, many customers use the same equipment for general test uses.

Popular - Rohde & Schwarz RF Test Equipment

RF Test Equipment Rentals

RF TEST EQUIPMENT MANUFACTURERS

WHY THE EMC SHOP

  • Established Supplier
  • Large Inventory
  • ISO 17025 Accredited Cal Lab
  • Creative Solutions
  • Fast Response Time
Show 12 24 36 48 96

RF Test Equipment Categories

RF Test Equipment Test Equipment, Systems & Solutions

  • AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

    SKU: sku-213

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.
    Connector: 2.9mm(f) to 2.9mm(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 40 GHz
    Gain: 37 dB typical (33 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA
    Maximum Continuous Power: +8 dBm @ 1 dB compression
    VSWR: less than 2.9:1 typical
  • AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

    SKU: sku-212

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Overcome attenuation problems at higher frequencies.
    Connector: 2.9mm(f) to 2.9mm(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 40 GHz
    Gain: 20 dB typical (15 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: +6 dBm @ 1 dB compression
    VSWR: less than 1.7:1 typical
  • AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

    SKU: sku-211

    Weight: 1.1 lbs. / 0.5 kg
    Connector: SMA(f) to SMA(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 18 GHz - 26.5 GHz
    Gain: 32 dB typical
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: +6 dBm @ 1 dB compression
    VSWR: 1.7:1 typical
    EMC Standards: CISPR 11, CISPR 32, FCC Part 15
  • AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz

    SKU: 2669

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 20 MHz - 18 GHz
    Gain: 37 dB typical
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: + 10 dBm @ 1 dB compression
    VSWR: 2.5:1 typical
    Inquire for Availability
  • AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

    SKU: 10209

    Weight: 1.1 lbs. / 0.5 kg
    Application/Test Type: Improve overall system sensitivity for field measurements.
    Connector: N(f) to N(f)
    Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)
    Frequency Range: 20 MHz - 7 GHz
    Gain: 30 dB typical (25 dB minimum)
    Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA
    Maximum Continuous Power: + 3 dBm @ 1 dB compression
    VSWR: 2.2:1 Input; 1.8:1 Output
  • Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

    SKU: sku-83

    Weight: 220 grams (0.3 Lbs)
    Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments
    Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms
    Dimensions: 39 mm x 88 mm x 36 mm
    Frequency Range: 1 GHz - 18 GHz
    Gain: 22 dB typical (± 3 dB flatness)
    Input: less than -10 dBm
    VSWR: less than 2:1 typical
  • Teseq LNA 6901 Low Noise Amplifier 9 kHz to 1 GHz

    SKU: sku-82

    Weight: .27 Lb's (127 grams)
    Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments
    Connector: N-type 50 Ohms
    Dimensions: 28 mm x 95 mm x 27 mm
    Frequency Range: 9 kHz to 1 GHz (nominal range); 9 kHz to 2 GHz (utilizable range)
    Gain: 28 dB typical (±1 dB flatness)
    Input: -20 dBm (87 dBμV)
    Maximum Continuous Power: +8 dBm @ 1 dB compression
    VSWR: Less Than 1.5:1
  • Anritsu S810D SiteMaster Cable and Antenna Analyzer

    SKU: 8865

    Frequency Range: 0.025 GHz to 10.5 GHz
    Output Power: <0 dBm (at any frequency)
    Measurement Accuracy: ≥42 dB corrected directivity after calibration for <5 GHz, ≥36 dB corrected directivity after calibration for <15 GHz, ≥32 dB corrected directivity after calibration for >15 GHz
    Applications: VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis
    $390.00 - $975.00
    In Stock
  • Rohde & Schwarz NRP-Z11 Power Sensor

    SKU: 6677

    Frequency Range: 10 MHz to 8 GHz
    RF Connector: N-Type (male)
    Power Measurement Range: -67 dBm to +23 dBm
    Max Average Power: 0.4 W (+26 dBm) continuous
    $380.00 - $3,800.00
    In Stock