ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

ESVM High Voltage Electrostatic Voltmeter for ESD Generator Voltage Verification

Condition:
New
Air Discharge Voltage:
± 1V ~ 100 kV ( ± 1% ± 2 counts )
Voltage Resolution:
1 Volt up to 20 kV, 10 Volts Over 20 kV
Display:
4 ½ large LCD / LED
Standards Met:
ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...
Input/Shunt Resistance:
100 GOhm

 

Availability:

Ships within 24 hours.

SKU:
ESVM

 

This product is available for shipping to North America and Western European countries.

Getting Started...

Check out our Google Reviews

ESVM Overview

The ESVM high impedance, high voltage meter for ESD gun charge voltage verification is a compact, cost effetive solution to verify the electrostratic discharge produced by simulators, guns pistols and generators. The ESVM High-impedance High-voltage Meter has a Measurement range: ± 1V ~ 100kV(customization), Accuracy: ± 1% ± 2 counts, Input impedance: ≥ 10 GΩ (customizable, like 30GΩ, 100GΩ), Display: 4 1/2 large LCD, Resolution: 1V.

Applications:

  • Electrostatic voltage measurement
  • ESD generator/simulator calibration
  • Electrostatic voltmeter calibration
  • High-impedance high-voltage measurement
  • Suitable for use for ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...

[split]

Specifications:

  • Range: ± 1V ~ 100 kV (customizable)
  • Accuracy: ± 1% ± 2 counts
  • Input impedance: 100 G ohm
  • Display: 4 ½ large LCD/LED
  • Resolution: 1V
  • 7.85" × 5.91" × 19.68" inch ( 20 × 15 × 50 cm )
  • 4.41 lb ( 2 kg ) 

Includes:

Videos

ESVM Key Considerations

Air Discharge Voltage:
± 1V ~ 100 kV ( ± 1% ± 2 counts )
Voltage Resolution:
1 Volt up to 20 kV, 10 Volts Over 20 kV
Display:
4 ½ large LCD / LED
Standards Met:
ANSI C63.16, ISO 10605, Mil-STD 461G CS118 and more...
Input/Shunt Resistance:
100 GOhm

Related EMC Equipment & Solutions

DP7 High Voltage Probe for Surge Generator Waveform Verification per IEC 61000-4-5

DP7 High Voltage Probe for Surge Generator Waveform Verification

SKU: 6533

Bandwidth: DC - 70 MHz
Attenuation: 1:100 and 1:1000
Accuracy: ±2%
Input Voltage Range: < +700V for X100, < +7000V for X1000
Output Voltage: ≤ + 7000V
Output Impedance: 50 Ω
Standard Met: IEC 61000-4-5, IEC 61010-031 Category I
Applications: Conducted Emissions, High Voltage Floating Measurements, Voltage Surge Measurement, Power Electronics System Design, Electronic Ballast Design
$185.00
IN STOCK
Ordering Options
Thermo Keytek ECAT High Voltage Burst/EFT Generator - The EMC Shop

Thermo Keytek ECAT High Voltage Burst/EFT Generator

SKU: 131312

Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
Burst frequency: Adjustable from 1 kHz to 1 MHz up to 4.4 kV; 1 kHz to 250 kHz from 4.4 kV to 8.0 kV
Burst time: 1 to 360 sec.; 1 second resolution 1 to 240 min.; 1 minute resolution 1 to 24 hours; 1 hour resolution
Polarity: Positive, negative, alternating
Pulse amplitude: 200V to 8.0kV, ±10%; 5 V resolution
Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEEE C62.41, UL 864, ANSI/IEEEC62.41, UL 1449
In Stock
View Product Cart
Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

Haefely PEFT 8010 High Voltage EFT/Burst Generator, 7.3kV

SKU: sku-306

Weight: 14 kg
Application/Test Type: Approval testing, Product development, Post design diagnostics, Industrial, Household
Burst (EFT) 5/50 ns: Pulse conforms to IEC/EN 61000-4-4
Burst frequency: 1 Hz … 110 kHz (Duration 0.01 - 999 ms)
Burst time: 0.1 Hz - 400 Hz; 2.5 ms - 10 s; 1 period - 500 periods
Coupling: Built-in Single Phase AC 264 Volts / 16 Amps 50-60Hz, 10 Amps from 16 - 400 Hz; 125V/10A DC (Modes: L-GND, N-GND, PE-GND, LN-GND, LPEGND, NPE-GND, LNPE-GND)
Dimensions: 450mm x 130mm x 570mm
General Data: Technical Details
Polarity: positive / negative / alternate
Pulse amplitude: 1.0 to 7.3kV (6.6 kV at CDN Output)
Repetition time: Impulses per second: max. 250 for Unom over 4 kV; Impulses per burst: max. 500 for Unom 4 kV
Standards Met: IEC/EN 61000-4-4 Ed. 1 + 2, IEC 61326, EN 61000-6-1, IEC 61850-3, EN 61000-6-2
Supply Voltage: 85 ... 264 VAC, 150 VA, 50 / 60 Hz
Test duration: 0 s … 8 h per path
View Product Cart

Connect with The EMC Shop

Our experienced staff can help you with applications, purchase and rental options.

Contact Form