Conducted Immunity Test Equipment

Conducted Immunity Categories

Electrical Noise/Transient Immunity

Bulk Current Injection (BCI) Test Equipment

Surge Simulation (Power & Telecom Lines)

Voltage Dips and Interruptions Testers

Low Frequency Conducted Immunity Testing

Electrostatic Discharge Immunity Test

Conducted Immunity Test Equipment, Systems & Solutions

AH Systems CPF-531 Calibration Fixture for RF Current Probes

SKU: sku-206

Weight: 10 Lb.'s

Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

Dimensions: 10" x 7" x 7"

Frequency Range: 1 MHz - 1 GHz

View Product
AH Systems CPF-630 Current Monitoring Probe Calibration Fixture

SKU: 10205

Weight: 9 Lb.'s

Application/Test Type: Keep your broadband Current Probes, and Injection Current Probes calibrated

Dimensions: 10" x 7" x 6"

Frequency Range: 20 Hz - 500 MHz

View Product
EM Test UCS 200N50 Automotive Transient Simulator

SKU: 11183

Applications: EMC Testing on EV Electric Vehicles Batteries & Charging Stations, Automotive Electrical Disturbances

Standards Met: ISO 7637, DC 10614, SAE J1113,

Max EUT DC Voltage (w/ Built In CDN): 80 Volts

Max EUT DC Current (w/ Built In CDN): 50 Amps

Peak Inrush Current Capability: 100 Amps

Pre-Programmed Pulses: ISO 7637-2 (Pulse 1, 2a,3a/3b 6),SAE J1113, GM 3097, BMW, Volkswagen, PSA, Chrysler PF 9326, DC 10614, Renault, FIAT, Mitsubishi, Honda, Ford ES-XW7T

Cost New:

Was:

Price Now:

$975.00 - $5,495.00

In Stock

Ordering Options
Haefely AXOS5 Surge/EFT/Burst Impulse Generator up to 5 kV

SKU: 10180

Applications: Conducted Immunity Testing, CE Marking, Medical Devices

Standards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

Max EUT AC Voltage (W/ Built In CDN): 264 Volts

Max EUT AC Current (W/ Built In CDN): 16 Amps

EFT/Burst Pulse Output Capability: 5.0 kV

Combination/Wave Surge Output Capability: 5.0 kV

Dips, Interrupts & Variations: Requires DIP 116

Cost New:

Was:

Price Now:

$975.00 - $1,795.00

Typically In Stock

Ordering Options
Teseq CAS ISN extension for T2

SKU: sku-169

Weight: approx. 95 g

Dimensions: (LxWxH): 87 mm x 29 mm x 27 mm

Frequency Range: 100 kHz to 100 MHz

Impedance: 50 Ω

View Product
Teseq CAS ISN Extension for Cat. 6

SKU: sku-167

Weight: approx. 85 g

Dimensions: (LxWxH): 72 mm x 32 mm x 27 mm

Frequency Range: (100 kHz) 1 MHz to 300 MHz

Impedance: 50 Ω

RF Connector: BNC female

View Product
Teseq PCJ 9201B Probe Calibration Jig

SKU: 11132

Weight: 4.5 Kgs (10 lbs)

Dimensions: 26.0 cm x 18.1 cm x 15.0 cm (Max Probe Diameter: 11.5 cm; Min Probe Window Diameter: 1.6 cm; Max: 6.7 cm)

Frequency Range: DC to 400 MHz

Impedance: 50 Ohms

RF Connector: N-type

Standards Met: ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and IEC/EN 61000-4-6

VSWR: up to 1 MHz ≤ 1.10:1; 10 MHz ≤ 1.14:1; 30 MHz ≤ 1.22:1; 100 MHz ≤ 1.50:1; 200 MHz ≤ 2.00:1; 300 MHz ≤ 2.75:1; 400 MHz ≤ 3.50:1

View Product
Teseq INA 6501 Manual Step Transformer for AC Dips & Interruptions

SKU: sku-116

Accuracy: ±5%

Input voltage UIN: 0 to 250 VAC, 50/60 Hz

Output voltage UVAR: 4 steps: 0% - 40% - 70% - 80% of UIN

Voltage change with load: 00% output, 0 to 16 A less than 5%; 80% output, 0 to 20 A less than 5%; 70% output, 0 to 23 A less than 5%; 40% output, 0 to 40 A less than 5%

Cost New:

Was:

Price Now:

$2,060.00
Rent Teseq CAS 3025 Burst/EFT Pulse Verification Kit

SKU: sku-60

View Product
Teseq MD 103 1 Ohm Current ESD Pulse Target

SKU: 10035

Resistance: 1.00 Ohm - ± 1% 1.00 Ohm when match with 50 Ohm load

Frequency Range: DC - 4 GHz

Grounding Plane & Cal Setup: Avaialble at ESDGuns.com

INQUIRE

View Product
Teseq INA 4381 ISO 10605 Discharge Network

SKU: 10022

Standards Met: ISO 10605

Resistance/Capacitance: 150pF/2000Ohm

Typically In Stock

View Product
Haefely DIP 116 Automatic Dips Transformer 16 Amps 40/70/80%

SKU: HAE-DIP116

Test Standards: IEC 61000-4-11

Typically In Stock

View Product