Conducted Immunity Test Equipment

Conducted Immunity Categories

Electrical Noise/Transient Immunity

Bulk Current Injection (BCI) Test Equipment

Surge Simulation (Power & Telecom Lines)

Voltage Dips and Interruptions Testers

Low Frequency Conducted Immunity Testing

Electrostatic Discharge Immunity Test

Conducted Immunity Test Equipment, Systems & Solutions

FCC F-120-9A Bulk Current Injection Probe

SKU: 8567

Test Standards: IEC 61000-4-6

Frequency Range: 10 kHz - 230 MHz

Maximum Input Power: 125 Watts

Aperture: 1.57"

Applications: Bulk Current Injection BCI Testing, RF Conducted Immunity Testing

Cost New:

Was:

Price Now:

$595.00 - $1,195.00

In Stock

Ordering Options
Noiseken INS-420R Impulse Noise Generator up to 4 kV w/ D-Stub Remote Control

SKU: 116891

Weight: 30 kg

Dimensions: W 430 x H 350 x D 470mm

Polarity: positive / negative

Pulse voltage (open circuit): 0.01 ~ 4.00kV±10% at 0.01kV step

Repetition time: 16ms ~ 999ms±10%

Supply Voltage: AC 100V~240V±10%, 50/60Hz±10%

Inquire for Availability

View Product
GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding

SKU: 30180

Ideal for: voltage bleeding to Ground Plane during Indirect ESD Immunity Testing

Compliant to: IEC 61000-4-2, ISO 10605, DO-160, Mil-STD CS118 and more.

Cable rated to: 40kV High Voltage Cable (150 degrees C)

Length: 1.5 Meters (5 Feet)

Resistance: HV Precision Resistors (1% tolerance)

Cost New:

Was:

Price Now:

$198.99 - $298.99

In Stock

Ordering Options
Teseq INA 5530 ISO 7637 Automotive Pulse 3a & 3b Verification Kit

SKU: sku-634

Impedance: 50 Ohms

RF Connector: Input BNC male Output BNC female

Voltage Rating: 1.2 kV, 3Wrms

View Product
3ctest PFS 2216SVD Single Phase Power Fail Simulator w/ Two Semiconductor Switches for High Current Protection

SKU: sku-591

Weight: 40Kg

Communication: Ethernet LAN、RJ45

Coupling: BNC

Dimensions: 19 inch/6U

Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Frequency: 45-65Hz

General Data: Technical Details

Input: BNC,5V TTL

Mains & EUT Connections: 4mm banana line

Maximum Continuous Power: 100W

Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

Peak inrush current capability: 500 Amps

Phase synchronization: 0°- 360°，1° step or random

Repetition time: 0.3-9999 cycle or 5ms-9999ms

Rise time: 1-5us（100Ω load）

Supply Voltage: 110V/220V, ±10%, 50/60Hz

Test duration: 50ms-50000ms

Test Voltage: 250V AC，300V DC

Trigger: BNC,5V TTL

View Product
3ctest PFS 2216SD Power Fail Simulator for EN/IEC 61000-4-11

SKU: sku-590

Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

Mains & EUT Connections: 4mm banana line

Output Current: 16A AC/DC continuous current; 20A continuous 5s 40Acontinuous 3s

Peak inrush current capability: 500 Amps

Applications: EMC Precompliance Testing, Conducted Immunity

Rise time: 1-5us（100Ω load）

Test duration: 50ms-50000ms

Test Voltage: 250V AC，300V DC

Trigger: BNC,5V TTL

Inquire for Availability

View Product
3ctest PFS 6030A Power Failure Simulator for Voltage Dips & Drops，60 V / 30 A

SKU: sku-588

Test voltage: Voltage drop: 1V max@30A

Weight: 20 kg

Dimensions: 19" / 4 U

Output: DUT voltage monitoring output: BNC，10:1 coaxial terminal output DUT current monitoring output: BNC，10A:1V coaxial terminal output

Peak current: 60A duration time 500 ms

Pulse duration: Drop duration time td 1us - 10 s

Repetition rate: 100 ms - 999s

Source Impedance: High resistance or low resistance

Test Voltage: 0–60 V

Trigger: External trigger signal by oscilloscope, BNC,5V TTL

Trigger of bursts: Automatic, manual, external

View Product
3ctest EFT 500T Burst/EFT Simulator w/ Three Phase CDN

SKU: 4559

Applications: Conducted Immunity Testing, EMC on Medical Devices, CE Marking

Standards Met: IEC 61000-4-4,IEC 61326,EN 61000-6-1,IEC 61850-3,EN 61000-6-2

Built-in three phase CDN: AC 380V/16A; DC-1 220V/16A

Output Voltage Range: 0.25 to 4.8kV

Condition of Used (Scale 5 - 10): 8

Pre Programmed Test Routines: Yes

Cost New:

Was:

Price Now:

$1,395.00 - $17,250.00

In Stock

Ordering Options
Com-Power ISN Calibration Kit for ISN and LCL Adapters

SKU: sku-580

View Product
EM Test PFS 503N32 Power Fail Simulator, 3-phase 3x480V AC (p-p) max. 32A

SKU: sku-549

Weight: app. 28kg;

Current Rating: Max. 32A

Dimensions: 19"/6 HU

Dips, Interrupts & Variations: Conforms to IEC/EN 61000-4-11, IEC/EN 61000-4-29

Frequency: 50Hz/60Hz, Single phase application

Output: 3-phase application L1, L2, L3, N and PE on the rear panel. 1-phase application L, N and PE on the front panel

Peak current: Better than 500A

Repetition rate: 0.01s to 9,999s

Rise time: Between 1us and 5us for abrupt changes, generator loaded with resistive load

Supply Voltage: 115V/230V; +10/-15%

Test Voltage: 3x480V AC resp. 3x690V AC (L-L) 277V AC resp. 400V AC 360V DC resp. 600V DC (L-N)

Trigger of bursts: Automatic

View Product
Haefely PIM 150 Oscillating Wave Surge Generator

SKU: 10526

Burst frequency: 100 kHz & 1 MHz

Coupling: Single & Multiple Path

Mains & EUT Connections: HV connector & CDN

Source Impedance: 200 ohms

Standards Met: IEC 61000-4-18 Power & Data lines; ANSI C37.90.1, IEC 60255-22-1, IEEE 1613

In Stock

View Product
Haefely PLINE 1610 Voltage Failure Simulator

SKU: 10503

Test Standards: IEC/EN 61000-4-11, IEC/EN 61000-4-29

Voltage Range: 0 - 264 Volts

Frequency Range: 48 to 62 Hz

Current Range: up to 16A rms continuous, 20A @ 80%, 23A @ 70%, 40A @ 40%(rms for 5s)

Phase synchronization: Synchronous 0 to 360 resolution, Asynchronous

Test duration: 1s to 100 hours

Trigger: Auto, Manual, External

Cost New:

Was:

Price Now:

$1,275.00 - $19,750.00

Typically In Stock

Ordering Options