EMI Receivers/EMC Analyzers

(Showing 12 of 19)

Electrical and magnetic disturbances are best identified using an EMC receiver/EMI analyzer with built in quasi peak detectors, noise floor extension and software features to identify electromagnetic events that can occur in speeds not managed well by most spectrum analyzers.

The EMC Shop specializes in radiated and conducted emissions testing. For CISPR or MIL complaint EMC receivers, or precompliance EMI spectrum analyzers, The EMC Shop stocks the right EMC analyzer for your testing needs. For precompliance testing, evaluation or troubleshooting, a standard spectrum analyzer doesn't always get the job done.

CONDUCTED EMISSIONS MEASUREMENTS

APP NOTE - EMC SPECTRUM ANALYZERS

A fully compliant EMI test receiver requires band pass filters and other RF components built into the analyzer to allow for full and accurate spectrum analysis as it sweeps to identify emission peaks while measuring.

A precompliant EMI receiver is a basic spectrum analyzer with software that provides basic data on an initial sweep, but typically requires a more narrow band, focused search to better identify the problem areas. Most of our customers use precompliant ananlyzers to measure and troubleshoot. However, there are occassions where you may not be able to identify the same problem areas your test lab did with a fully compliant EMI receiver.

Start Testing

The EMC Shop ships rental equipment for EMC/EMI measurements same day.

Contact Form

Precompliant EMC/EMI Spectrum Analyzers

Compliant EMI Test Receivers

Harmonics and Flicker Analyzers

Transient Limiters

Keysight N9038A-508 EMI Receiver

SKU: KEY-N9038A-508-B25-CNF

Frequency Range: 3 Hz to 8.4 GHz

Standards Met: CISPR16-1-1, ANSI-C63.2, MIL‑STD‑461 and FCC

Calibration: Accredited ISO 17025

Options: 508, B25, CNF

Typically In Stock

Cart
PMM ER9000 EMI Test Receiver

SKU: sku-2366

Frequency Range: 10 Hz - 3 GHz

Compliant?: Yes

Applications: Conducted Emissions, Radiated Emissions

Pre-programmed Test Limits: CISPR 11, CISPR 22

Other Features: Click Analyzer (CISPR 14-1)

Typically In Stock

Cart
Rohde & Schwarz ESW44 EMI Test Receiver for CISPR16-1-1, 1 Hz to 44 GHz

SKU: sku-2356

Frequency Range: 2 Hz to 44 GHz

Standards Met: CISPR16-1-1, ANSI-C63.2, MIL‑STD‑461 and FCC

Calibration: Accredited ISO 17025

Options: B4, B21 or B8E, B21, B24

Typically In Stock

Cart
RESA Realtime EMC Spectrum Analyzer

SKU: sku-2075

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Max Frequency: 3 GHz or 7.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Fast

Amplitude Accuracy: <0.7 dB

Resolution Bandwidth: 1 Hz to 3 MHz

Videos: Setting Limit Lines, Debugging Failures, Inputting Antenna Factors

MSRP:

Was:

Price Now:

$195.00

In Stock

Choose Options
ESA EMI Spectrum Analyzer for Precompliance Testing

SKU: sku-2048

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, and more

Max Frequency: 1 GHz, 3 GHz or 7.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Slow

Amplitude Accuracy: < 0.7 dB

Resolution Bandwidth: 1 Hz to 3 MHz

Videos: Setting Limit Lines, Debuggin Failures, Inputting Antenna Factors

MSRP:

Was:

Price Now:

$99.00

IN STOCK

Choose Options
R&S EMI Receiver - ESW Series

SKU: sku-722

Weight: 45.42 lb

Dimensions: 18.15 in × 9.44 in × 19.81 in

Frequency Range: 2 Hz up to 8, 26.5, or 44 GHz

Standards Met: CISPR16-1-1, ANSIC63.2, MIL‑STD‑461 and FCC

Typically In Stock

Cart
Rohde & Schwarz ESRP3 EMI Test Receiver per CISPR 16-1-1

SKU: sku-695

Inquire

Cart
Keysight (Agilent) N9038A-526 MXE EMI Receiver, 3 Hz to 26.5 GHz

SKU: sku-259

Typically In Stock

Cart
Rent Keysight N9048B CISPR 16 EMI Receiver

SKU: sku-2064

Frequency Range: 1 Hz to 26.5 GHz

Standards Met: CISPR16-1-1, ANSI-C63.2, MIL‑STD‑461 and FCC

Calibration: Accredited ISO 17025

Options: 526, B25, B40, CR3, EXM, P26, PFR, YAS

Applications: Conducted Emissions, Radiated Emissions

IN STOCK

Cart
Narda PMM 7010 EMI Test Receiver

SKU: sku-25

Frequency Range: 9 kHz to 3 GHz

Applications: Precompliance conducted emissions, precompliance radiated emissions

Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector function

Pre-programmed Test Limits: CISPR 11, CISPR 22

Sweep/Test Speed: Slow

Other Features: Built-in LISN (1PH/16A)

MSRP:

Was:

Price Now:

$495.00

IN STOCK

Choose Options
Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

SKU: sku-260

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Max Frequency: 26.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Moderate

Amplitude Accuracy: 0.37 dB

Resolution Bandwidth: 1 Hz to 5 MHz

MSRP:

Was:

Price Now:

$995.00
Rohde & Schwarz ESRP7 EMI Test Receiver per CISPR 16-1-1

SKU: sku-721

CALL FOR LEAD TIME

Cart