Conducted Emissions Equipment - The EMC Shop

Conducted Emissions

(Showing 12 of 92)

Conducted Emissions Categories

Analyzers, Receivers and Scopes

RF & Antenna Signal Boosters

Impedance Stabilization Networks (Power and Dat...

Probes and Clamps

Flicker & Harmonics Measurement

Transient Limiters

Conducted Emissions Test Equipment, Systems & Solutions

AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

SKU: 3727

Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

Connector: N(f) to N(f)

Frequency Range: 20 MHz - 2000 MHz

Gain: 30.4 dB typical (29.5 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 140 mA

Maximum Continuous Power: + 6 dBm @ 1 dB compression

VSWR: 1.5:1 Input; 1.8:1 Output

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$149.00 - $1,250.00

Typically In Stock

Ordering Options
PA2500M Low Noise Amplifier, 1 - 2500 MHz

SKU: 18371

Weight: 1.45 lbs (2.5 lbs with Internal Battery)

Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

Connector: N(f) to N(f) (Inquire for SMA or BNC)

Dimensions: 4.25" x 2.31" x 6.73"

Frequency Range: 1 MHz - 2500 MHz

Gain: 31.5 dB typical (30 dB minimum)

Input: 120 VAC regulated P/S or 12 VDC Battery

Maximum Continuous Power: + 20 dBm @ 1 dB compression

VSWR: 2:1 Max

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$1,395.00 - $1,695.00

In Stock

Ordering Options
Schwarzbeck NNLK 8121 100 Amp Line Impedance Stabilization Network

SKU: 10857

Application/Test Type: Power Line Conducted Emissions Tests

Current Rating: 100 Amperes

Standards Met: ANSI C63.4, CISPR 16-1-2

Frequency Range: 9 kHz - 30 MHz

Inductors: 50 µH

Insertion loss: less than 0.7 dB

Isolation: more than 40 dB

Mains & EUT Connections: Remote Interface Power Input Port 5.5/2.5 mm Power Jack

RF Connector: RF Measurement Port 50Ω - N-Type (female)

Voltage Rating: 500 Volts rms (line to line), 288 Volts rms (line to ground) Max DC Voltage: 705V

Cost New:

Was:

Price Now:

$48.00 - $795.00

Typically In Stock

Ordering Options
EM Test ACS 503N30 AC Voltage Source for Harmonics & Flicker

SKU: 1312

Applications: Flicker and Harmonics Testing

Test Standards: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Outpur Power: 30 kVA (300 Volts)

Output Current: inductive load: 41 A (43 A), resistive: 34 A (33 A), capacitive: 27 A (26 A) cont., 78 A 79 A) for 3 s, 300 A repetitive peak

Frequency Range: 10 to 80 Hz

Inquire for Availability

View Product
EMCO (ETS-Lindgren) 3810-2 LISN, NEMA, 9 kHz - 30 MHz, 10 Amps

SKU: 11287

Application/Test Type: Power line conducted emissions tests

Current Rating: 10 Amps

Dimensions: 8.7 x 15 x 6 inches / 22.2 x 38.1 x 15.2 cm

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 µH/250µH

Mains & EUT Connections: NEMA typical. (SCHUKO and British available upon request)

RF Connector: 50Ω BNC Monitor

Standards Met: FCC Part 15, VDE 0871, VDE 0875

Voltage Rating: 250 VAC (Line to Ground)

Cost New:

Was:

Price Now:

$195.00 - $1,975.00

In Stock

Ordering Options
Rent Agilent (HP) E7401A EMC Analyzer, 9 kHz to 1.5 GHz

SKU: 10260

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Max Frequency: 26.5 GHz

Min Frequency: 9 kHz

Sweep/Test Speed: Moderate

Amplitude Accuracy: 0.37 dB

Resolution Bandwidth: 1 Hz to 5 MHz

Cost New:

Was:

Price Now:

$995.00
EM Test DPA 500N Power Analyzer for Harmonics & Flicker

SKU: sku-242

Standards Met: IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11

Application/Test Type: Medical Device EMC Testings

Typically In Stock

View Product
EM Test DPA 503N Flicker & Harmonics Analyzer

SKU: 11286

Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Max Current (per Channel): 32 Amps

Applications: Medical Device EMC Testing

Matching Impedance Network: EM Test AIF 503N

Inquire for Availability

View Product
Teseq ProfLine 2105 Flicker and Harmonics Measuring System

SKU: 30177

Output Power (AC Mode): 5000 VA

Power Source: 5kVA single phase 0-270V, 18.5A

Number of Channels: 4

Fundamental: 0.05% +/- FS +/-0.05% / kHz

Harmonics: 0.1%+/- 0.1% +/-/ kHz

Accuracy: 3%

Applications: Flicker and Harmonics Measurement

Test Standards: IEC 61000-3-2, IEC 61000-3-3

Inquire for Lead Time

View Product
Ranger Power Master PM3000HF 3-Phase Power Quality Analyzer with Flicker and Harmonics

SKU: 8845

Input Voltage: 0 - 480 VAC

Channels: 16

Applications: Harmonics and Flicker

Test Standards: IEC 61000-4-15, IEC 61326, IEC 61010

Additional Test Standards: IEC 61000-3-2, IEC 61000-3-3

Measurements: Voltage, current, power, power factor, VARs, phase angle, frequency, THD, and much more

Number of configurations: 23 pre-programed factory configurations

Harmonics: Odds, Evens, Triplens, Individual Harmonics and Harmonic Direction to the 15th, K Factor, % Total Harmonic Distortion to the 25th, Harmonic Value

In stock

View Product
RESA3G Realtime EMC Spectrum Analyzer

SKU: 2075

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Frequency Range: 9 kHz - 3 GHz

Sweep/Test Speed: Fast

Amplitude Accuracy: <0.7 dB

Resolution Bandwidth: 1 Hz to 3 MHz

Cost New:

Was:

Price Now:

$495.00 - $1,095.00

In Stock

Ordering Options
Com-Power ISN-T8 Impedance Stabilization Network and Calibration Kit

SKU: 30149

Weight: 1.4 lbs. (0.6 kg) [ISN + LCL Adapter + Connecting Adapter]

Current Rating: 800 mA (per line), 1.6 Amps (per pair)

Dimensions: see photo in images

Frequency Range: 150 kHz to 30 MHz

Isolation: 150 kHz to 1.5 MHz: 35 to 55 dB 1.5 MHz to 30 MHz: 55 dB

Mains & EUT Connections: D-sub 25 pin female connectors

RF Connector: 50Ω N-type (female)

Standards Met: CISPR 16-1-2, CISPR 22

Voltage Rating: 50 VDC / 32 VAC (line to ground @ 50/60 Hz)

Typically in Stock

View Product