Conducted Emissions Equipment - The EMC Shop

Conducted Emissions

(Showing 12 of 92)

Conducted Emissions Categories

Analyzers, Receivers and Scopes

RF & Antenna Signal Boosters

Impedance Stabilization Networks (Power and Dat...

Probes and Clamps

Flicker & Harmonics Measurement

Transient Limiters

Conducted Emissions Test Equipment, Systems & Solutions

AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

SKU: sku-211

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

Connector: SMA(f) to SMA(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 18 GHz - 26.5 GHz

Gain: 32 dB typical

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: +6 dBm @ 1 dB compression

VSWR: 1.7:1 typical

EMC Standards: CISPR 11, CISPR 32, FCC Part 15

View Product
AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz

SKU: 2669

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 18 GHz

Gain: 37 dB typical

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: + 10 dBm @ 1 dB compression

VSWR: 2.5:1 typical

Inquire for Availability

View Product
AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

SKU: 10209

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 7 GHz

Gain: 30 dB typical (25 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: + 3 dBm @ 1 dB compression

VSWR: 2.2:1 Input; 1.8:1 Output

View Product
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

SKU: sku-83

Weight: 220 grams (0.3 Lbs)

Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms

Dimensions: 39 mm x 88 mm x 36 mm

Frequency Range: 1 GHz - 18 GHz

Gain: 22 dB typical (± 3 dB flatness)

Input: less than -10 dBm

VSWR: less than 2:1 typical

View Product
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

SKU: sku-81

Weight: 0.27 Lb's (127 grams)

Connector: N-type 50 Ohms

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compression

VSWR: less than 1.5:1

View Product
PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

SKU: 10062

Weight: 248 kg (546 pounds)

Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuits

Current Rating: 300 Amps continuous (500 Amps for 20 minutes)

Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or Bypass

Input: 230 V - 50/60 Hz, 50 VA each line

Mains & EUT Connections: M14 bolts

RF Connector: BNC (f)

RF Input Voltage: BNC (f)

Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

View Product
PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

SKU: 10058

Weight: 70 kg (154 pounds)

Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)

Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobility

Frequency Range: 9 kHz to 30 MHz

Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

Mains & EUT Connections: 125 A plug and socket outlet according to IEC309 standard

RF Connector: BNC (f)

Standards Met: CISPR 16-1-2, VDE 0876, FCC Part 15, MIL-STD 461F

Voltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)

Inquire for Availability

View Product
PMM 9010

SKU: 11026

Frequency Range: 10 Hz - 30 MHz

Applications: Conducted Emissions

Test Standards: CISPR 14, CISPR 16-1-1

Cost New:

Was:

Price Now:

$495.00 - $5,500.00

In Stock

Ordering Options
RESA7G Realtime EMI Measurement Analyzer

SKU: 2075-1

Applications: Conducted Emissions, Radiated Emissions, Spectrum Analyzers for EMC

Pre-programmed Test Limits: FCC Part 15, CISPR 22, MIL-STD-461

Frequency Range: 9 kHz - 7 GHz

Sweep/Test Speed: Fast

Amplitude Accuracy: <0.7 dB

Resolution Bandwidth: 1 Hz to 3 MHz

Cost New:

Was:

Price Now:

$695.00 - $1,395.00

In Stock

Ordering Options
York EMC HFG01 Harmonic and Flicker Generator

SKU: 6822

Test supply connector: 1.3 m captive lead with CEE 7/7 mains plug for connection to test equipment

Power Supply: External power supply, 24 V DC, 1A maximum

Indicators: Thermal shutdown

Harmonic current: Up to 40th harmonic: 50 Hz to 2 kHz

Flicker disturbance: 1 Hz and 8.33 Hz

Dimensions: 330 mm × 320 mm × 170 mm

Test Standards: IEC 61000-3-2, IEC 61000-3-3

Cost New:

Was:

Price Now:

$650.00 - $6,500.00

IN STOCK

Ordering Options
LISN-AC-CISPR16-10 Line Impedance Stabilization Network

SKU: 8666

EUT Current Handling: 10 Amps

EUT Voltage Handling: 250 Volts

Inductance: 50 uH (w/ 250 µH Choke)

Applications: Conducted Emissions Testing, CE Marking

Additional Test Standards: CISPR 16-1-2, FCC Part 15, ANSI C63.4

Features: DC Capable, Artificial Hand, Simultaneous Line Monitoring

IN STOCK

View Product
PHFA Harmonics and Flicker Analyzer

SKU: 10451

Standards Met: IEC/ISO 60601-1-2, IEC 61000-3-2, IEC 61000-3-3, IEC/EN61000-4-7, IEC/EN61000-4-15

EUT Power Handling: 1PH/16 Amps

Max Current (with LDPS Source): 16 Amps (5 Amps)

Max Voltage (with LDPS Source): 690 Volts (630 Volts)

IN STOCK

View Product