Conducted Emissions Equipment

Conducted Emissions

(Showing 12 of 92)

Conducted Emissions Categories

Analyzers, Receivers and Scopes

RF & Antenna Signal Boosters

Impedance Stabilization Networks (Power and Dat...

Probes and Clamps

Flicker & Harmonics Measurement

Transient Limiters

Conducted Emissions Test Equipment, Systems & Solutions

3 Phase Harmonics & Flicker Test System IEC 61000-3-11 and 3-12

SKU: 11918

Standards Met: IEC 61000-3-11, IEC 61000-3-12, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-7, IEC 60601-1-2 and more

Applications: Flicker and Harmonics Testing

Current Handling: 32 Amps per phase

Inquire for Availability

View Product
Narda PMM 7010 EMI Test Receiver

SKU: 10025

Frequency Range: 9 kHz to 3 GHz

App Note: Differences Between EMI Test Receivers and Spectrum Analyzers, Precompliance conducted emissions,

Detectors: Peak, Quasi-Peak, Average, RMS, RMS-Avg (optional), C-Avg, Smart Detector function

Pre-programmed Test Limits: CISPR 11, CISPR 22

Sweep/Test Speed: Slow

Other Features: Built-in LISN (1PH/16A)

Test Type: EMC Precompliance Testing, Conducted Emissions, Radiated Emissions

Test Standards: CISPR 16-1-1, ANSI C63.2, MIL‑STD‑461 and FCC

Cost New:

Was:

Price Now:

$495.00 - $2,375.00

IN STOCK

Ordering Options
3ctest ML300HVS Artificial Mains Network LISN

SKU: 57281

EUT Current Handling: 300 A

EUT Voltage Handling: 1,000 VDC; 270 VAC

Applications: Conducted Emissions, Military EMC Testing

Test Standards: MIL-STD-461, GJB 151B

Inductors: 50 μH

Frequency Range: 9 kHz to 30 MHz

Connector: N-type (f)

Inquire for Availability

View Product
Conducted Emissions Test Setup

SKU: 7077

Applications: Conducted emissions testing on power and data lines, CE Marking

Test Standards: IEC 61000-4-7, IEC 61000-4-30, IEC-61000-4-19, CISPR 11, CISPR 25, CISPR 32, FCC Part 15, MIL-STD 461, ANSI C63.4, DO-160 and more

Measurement Range: 1 kHz - 1 GHz (150 kHz - 30 MHz typical)

Power Handling: up to 1,000 Volts and 1,000 Amps

OEM Measurement Receivers Available: Rohde & Schwarz, Keysight, Siglent, Rigol, PMM, Amplifier Research, Frankonia

OEM LISN's Available: Schwarzbeck, FCC, Com-Power, Solar Electronics, PMM, Tekbox, Agilent/HP

Generic Standards: IEC 61000-6-3, IEC 61000-6-4

Cost New:

Was:

Price Now:

$590.00 - $14,950.00

In Stock

Ordering Options
LISN-CISPR16-32A Line Impedance Stabilization Network

SKU: 8671

EUT Current Handling: 32 Amps

Line Voltage: It can be operated with any supply voltage which does not exceed 540V/260V, 50Hz/60Hz. It is also suitable for DC operation.

Applications: Conducted Emissions, BCI Testing , Automotive EV EMC

Services Available: ISO 17025 Calibration, Rentals, Leases, Purchases, Repairs, Eval/Characterization

Test Standards: CISPR 16-1-2, ISO 60601-1-2

Inductance: 50 uH

Videos: Debugging Conducted Emissions Failures

Additional Test Standards: FCC Part 15, MIL-STD-461

In Stock

View Product
PA2G Broadband Coaxial Preamplifier 9 kHz - 2 GHz

SKU: 5573

Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

Frequency Range: 9 kHz - 2 GHz

Gain: 30 dB

Power Supply: 12V DC

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$1,795.00

IN STOCK
ISN30M Impedance Stabilization Network for CAT-6 Cable

SKU: 8455

Test Standards: CISPR 24, CISPR 32, CISPR 16-1-2 Annex E

Cable Type: Cat 6 (Cat 3 and Cat 5 with add-on module)

Data Speed: 10GBASE-T

Compliant to: CISPR 22, Appendix D, Fig. D.3

Cost New:

Was:

Price Now:

$219.00 - $3,650.00

In Stock

Ordering Options
EM Test Voltage Transient Emissions Tester AN 200

SKU: 1226

Voltage Range: 0-30 VDC

Rated Current: 25 A

Peak Voltage: 1000 V

Dimensions: Dimensions: (L x B x H): 425 x 530 x 180 mm

Inductance: (5 µH/5 mΩ)

In stock

View Product
Tektronix TDS3052C Oscilloscope 500 MHz

SKU: 12247

Bandwidth: 500 MHz

Channels: 2

Sample rates on all channels: 5.0 GS/s

standard record length on all channels: 10 k

continuous waveform capture rate: 3,600 wfms/s

Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

Cost New:

Was:

Price Now:

$19.00 - $249.00

In Stock

Ordering Options
Fischer Custom Communications FCC-LISN-50-100, 50 uH, 100 Amp, Line Impedance Stabilization Network

SKU: 30062

Application/Test Type: Conducted Emissions

Current Rating: 100 Amperes

Frequency Range: Model Specific, up to 60 Hz

Inductors: 50 µH

Mains & EUT Connections: Multiple Options Available

RF Connector: Multiple Options Available

Standards Met: DO-160F, CISPR 25-1, and MIL-STD-461

Voltage Options: 240V or 480 V

Inquire for Lead Time

View Product
Rohde & Schwarz (R&S) RTE1204 Digital Oscilloscope, 2 GHz, 4 channels, 5 Gsample/s, 10/40 Msample

SKU: 30048

Bandwidth: 2 GHz

Realtime sampling rate: max. 5 Gsample/s on each channel

Trigger types: edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional)

Channels: 4

Applications: How to Capture an Electrical Transient Using an Oscilloscope, EMC Precompliance Testing

Cost New:

Was:

Price Now:

$950.00

Inquire for Availability

Ordering Options
Teseq FT 801 Ferrit Tube EM Decoupling Clamp, 150 kHz to 1 GHz, 35 mm Cable Diameter

SKU: sku-673

Weight: approx. 8 kg

Application/Test Type: decoupling network (ferrite tube) for immunity test according to IEC / EN 61000-4-6

Dimensions: 670 mm x 70 mm x 80 mm

Frequency Range: 150 kHz to 1000 MHz

Max. Cable Diameter: 35 mm

Standards Met: IEC/EN 61000-4-6 CISPR 24 EN 61000-6-1 EN 61000-6-2 IEC 60533 IEC 60601-1-2 IEC 61326

View Product