Test Applications

Test Applications Test Equipment, Systems & Solutions

• 

  Teseq CAS ISN Extension for Cat. 6

  SKU: sku-167

  Weight: approx. 85 g

  Dimensions: (LxWxH): 72 mm x 32 mm x 27 mm

  Frequency Range: (100 kHz) 1 MHz to 300 MHz

  Impedance: 50 Ω

  RF Connector: BNC female

  VIEW PRODUCT Cart

• 

  Teseq PCJ 9201B Probe Calibration Jig

  SKU: 11132

  Weight: 4.5 Kgs (10 lbs)

  Dimensions: 26.0 cm x 18.1 cm x 15.0 cm (Max Probe Diameter: 11.5 cm; Min Probe Window Diameter: 1.6 cm; Max: 6.7 cm)

  Frequency Range: DC to 400 MHz

  Impedance: 50 Ohms

  RF Connector: N-type

  Standards Met: ISO 11452-4, RTCA/DO-160 section 20, MIL-STD-461 and IEC/EN 61000-4-6

  VSWR: up to 1 MHz ≤ 1.10:1; 10 MHz ≤ 1.14:1; 30 MHz ≤ 1.22:1; 100 MHz ≤ 1.50:1; 200 MHz ≤ 2.00:1; 300 MHz ≤ 2.75:1; 400 MHz ≤ 3.50:1

  VIEW PRODUCT Cart

• 

  Teseq INA 6501 Manual Step Transformer for AC Dips & Interruptions

  SKU: sku-116

  Accuracy: ±5%

  Input voltage UIN: 0 to 250 VAC, 50/60 Hz

  Output voltage UVAR: 4 steps: 0% - 40% - 70% - 80% of UIN

  Voltage change with load: 00% output, 0 to 16 A less than 5%; 80% output, 0 to 20 A less than 5%; 70% output, 0 to 23 A less than 5%; 40% output, 0 to 40 A less than 5%

  Cost New:

  Was:

  Price Now:

  $2,060.00

• 

  Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

  SKU: sku-83

  Weight: 220 grams (0.3 Lbs)

  Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

  Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms

  Dimensions: 39 mm x 88 mm x 36 mm

  Frequency Range: 1 GHz - 18 GHz

  Gain: 22 dB typical (± 3 dB flatness)

  Input: less than -10 dBm

  VSWR: less than 2:1 typical

  VIEW PRODUCT Cart

• 

  Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

  SKU: sku-81

  Weight: 0.27 Lb's (127 grams)

  Connector: N-type 50 Ohms

  Dimensions: 28 mm x 95 mm x 27 mm

  Frequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)

  Gain: 12.5 dB (±0.3 dB flatness)

  Input: 0 dBm (107 dBμV)

  Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compression

  VSWR: less than 1.5:1

  VIEW PRODUCT

• 

  PMM L3-500 500 Amp, 9 kHz - 30 MHz Line Impedance Stabilization Network (LISN)

  SKU: 10062

  Weight: 248 kg (546 pounds)

  Application/Test Type: LISN for AC Three phase plus neutral V-Network power circuits

  Current Rating: 300 Amps continuous (500 Amps for 20 minutes)

  Dimensions: 555 x 930 x 830 mm (21 x 36.6 x 32.6 inches)

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH Choke or Bypass

  Input: 230 V - 50/60 Hz, 50 VA each line

  Mains & EUT Connections: M14 bolts

  RF Connector: BNC (f)

  RF Input Voltage: BNC (f)

  Standards Met: CISPR 16-1-2; VDE 0876; FCC part 15; MIL-STD 461F

  VIEW PRODUCT Cart

• 

  Rent Teseq CAS 3025 Burst/EFT Pulse Verification Kit

  SKU: sku-60

  VIEW PRODUCT Cart

• 

  PMM L3-100 Three Phase 100 Amp LISN for CISPR 16-1-2

  SKU: 10058

  Weight: 70 kg (154 pounds)

  Current Rating: 100 Amps continuous (125 Amps overload for 5 minutes)

  Dimensions: 465 x 450 x 740 mm (18.3 x 17.7 x 29 inches) - mounted on pallet for mobility

  Frequency Range: 9 kHz to 30 MHz

  Inductors: 50 Ω // [5 Ω + 50 µH] with 250 µH choke

  Mains & EUT Connections: 125 A plug and socket outlet according to IEC309 standard

  RF Connector: BNC (f)

  Standards Met: CISPR 16-1-2, VDE 0876, FCC Part 15, MIL-STD 461F

  Voltage Rating: 230 VAC, 325 VDC (L-PE and N-PE); 400 VAC, 565 VDC (L-L and L-N)

  Inquire for Availability

  VIEW PRODUCT Cart

• 

  Teseq MFO 6502 Automatic Power Line Frequency Magnetic Field Generator

  SKU: 10045

  Test Standards: IEC/EN 61000-4-8

  Antennas: Teseq INA 701, 702 or 703

  Compatible Generators: Teseq NSG 3040 and NSG 3060

  VIEW PRODUCT Cart

• 

  Teseq MFO 6501 Manual Power Line Frequency Magnetic Field Generator

  SKU: 10043

  Test Standards: IEC 61000-4-8

  Antennas: Teseq INA 701, 702 or 703

  Test Frequency: Selectable 50 Hz and 60 Hz ±3%

  Magnetic Field Levels: Antenna Dependent

  Cost New:

  Was:

  Price Now:

  $195.00 - $1,095.00

  Inquire for Availability

  ORDERING OPTIONS

• 

  Teseq INA 703 Magnetic Field Coil for NSG 3040 & NSG 3060

  SKU: 10042

  Test Standards: IEC 61000-4-8

  # of turns: 1, 5, 37

  Dimensions: Coil Size: 1 x 1 m, Homogeneous field volume: 60 x 60 x 50 cm

  Mounting Base: Rigid aluminum frame with casters

  RF Connector: 4 pole connector (INA 3250)

  Cost New:

  Was:

  Price Now:

  $129.00 - $495.00

  Typically In Stock

  ORDERING OPTIONS

• 

  Teseq INA 702 Magnetic Field Coil up to 1200 A/m Pulsed

  SKU: 30173

  Coil Size: 1 x 1 m / 39.3 x 39.3 in

  Max. Vertical Positioning Height: 130 cm / 51.1 in

  Turns: 1, 5, 37

  Max. Contin. Supply Frequency Current: 10 A

  Max. Short Term Supply Frequency Current (3 s): 30 A

  Max. Contin. Supply Frequency Field Strength: 330 A/m

  Max. Short Term Supply Frequency Field Strength (3 s): 1100 A/m

  Applications: Radiated Immunity

  Test Standards: EN/IEC 61000-4-8

  Inquire for Availability

  VIEW PRODUCT Cart