Test Application Categories
Test Application
-
3ctest PFS-A Series Voltage Interruption Simulator
SKU: 2686
DUT supply voltage: 0 to 80 VDUT supply current: 50 AmpsPeak current: 100A duration 500 msSwitching Time: ≤ 200ns (meets GM3172 9.2.18) And compatible with ≤ 1us (LV124, VW 80000, etc.)Fall Duration: 1us – 1 sIn Stock -
Keytek E503 Ring Wave Simulator for ANSI/IEEE C62.4 and UL 864
SKU: 10546
Pulse current (short circuit): Selectable at 200A max. or 500A max., when the open-circuit voltage is set to 6.0kV.Pulse repetition: 1 shot/9 secondsPulse voltage (open circuit): 200V - 6.6kV ± 10%Ringwave 0.5 μs/100 kHz: Pulse conforms to IEC/EN 61000-4-12 and ANSI (IEEE) C62.41Standards Met: ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864IN STOCK -
EM Test AutoWave for Generating and Recording Automotive Waveforms
SKU: 21477
Frequency Range: DC - 50 kHzSample Rate: 500 kS/s (1 ch)Output Channels: 2Output Voltage: 10 V, unipolar or bipolarVoltage: 10V, unipolar or bipolarNOT OFTEN -
Teseq NSG 3040 Transient Immunity Test System
SKU: 4141
Test Capabilities: Combination Wave Surge Immunity, EFT/Burst, Dips Interrupts & VariationsStandards Met: IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11, IEC 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT Voltage (w/ Built in CDN): 264 VoltsMax EUT Current (w/ Built in CDN): 16 Amps$1,495.00In Stock -
SS400M4k EMC CS Power Amplifier 4 kHz to 400 MHz
SKU: 9159
RF Output Power: 75 - 250 WattsFrequency Range: 4 kHz - 400 MHz (Power derated from 4 - 9 kHz)Applications: Bulk Current Injection TestingMax Input Power: 0 dBmLoad VSWR: 100% mismatch tolerantTypically in Stock -
EMC Partner TRA2000 + CDN2000A-06-20 3 Phase Transient Generator with Surge, EFT, and PFQ Testing
SKU: sku-2365
Test Capabilities: Combination Wave Surge Immunity , EFT/Burst, AC &DC Dips & InterruptsStandards Met: IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-11, IEC/EN 61000-4-29Applications: CE Marking, Medical Devices, Industrial Machinery, Electronics & ITMax EUT AC Voltage (w/ Built in CDN): 280 Volts (480V L-L)Max EUT AC Current (w/ Built in CDN): 20 Amps (per phase)IN STOCK -
Chroma 19032 Guardian Electrical Safety Analyzer
SKU: 14100
Standards Met: IEC 60950, IEC 6134701, IEC 60065, IEC 60446, IEC 60601, IEC 61851Current Handling: Up to 20 Amps$495.00In Stock -
$550.00In Stock -
Langer EMV-Technik P11t Mini Burst Field Generator (B, Trigger)
SKU: 30043
Generator Voltage: 400 VExternal Trigger Input: SMB, male, jack; 5 V TTLRise Time: 1.8 ns - 10 nsApplications: Burst/EFT Testing, EMC Precompliance TestingTest Standards: 61000-4-4Typically in Stock -
Schloder CN 1240-125 125A Coupling Network
SKU: 30174
Frequency Range: DC, 15 Hz - 150 kHzInput Voltage: 0 V up to ± 300 VRated Voltage (AE - EUT): 250 V AC/DCRated current (AE - EUT): 125 AConnector: BNCInquire for Availability -
EM Test LD 200N Load Dump Generator for ISO 16750-2
SKU: 5955
Output: +/- output Safety laboratory connectors Coupling To the battery +lineDecoupling Via diodeDUT supply Max. 80V/30AFreestyle Mode Micropulses: Rise time 1us 10us - 90us with 10us steps 100us - 900us with 100us steps 1ms - 10ms with 1ms steps Pulse duration 10ms - 1,200ms Int. resistor 0.5ohm - 38ohm, in steps of 0.1ohmTest Standards: ISO 7637-2 Pulse 5b for 12V and 24V, ISO/WD 16750 Pulse 5b, and much moreTest Routines: Quick Start, User Defines Routines, Standards Test Routines Service$2,290.00Typically In Stock -
GRC Series Ground Cable w/ 470k Ohm Resistors for ESD Voltage Bleeding
SKU: 30180
Total Resistance: 1 MOhm (± 1%)Connector Type: 1/4" SpadeCable Voltae Withstand: 40kV (150 degrees C)Length: 1.5, 2 and 3 MetersResistance: HV Precision Resistors (1% tolerance)$279.00In Stock