RF & Antenna Signal Boosters

RF & Antenna Signal Boosters Test Equipment, Systems & Solutions

PA2G Broadband Coaxial Preamplifier 9 kHz - 2 GHz

SKU: 5573

Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

Frequency Range: 9 kHz - 2 GHz

Gain: 30 dB

Power Supply: 12V DC

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$1,795.00

IN STOCK
AH Systems PAM-0204 Preamplifier, 20 MHz - 4 GHz, 24 dB

SKU: 10249

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 4 GHz

Gain: 26 dB typical (22 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

VSWR: 2.0:1 Input; 1.7:1 Output

Cost New:

Was:

Price Now:

$550.00

Typically In Stock
AH Systems PAM-1840VH High Gain Broadband Preamplifier, 18 - 40 GHz

SKU: sku-213

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Overcome attenuation problems at higher frequencies. Match to double ridge guide horn antenna.

Connector: 2.9mm(f) to 2.9mm(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 18 GHz - 40 GHz

Gain: 37 dB typical (33 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 275 mA

Maximum Continuous Power: +8 dBm @ 1 dB compression

VSWR: less than 2.9:1 typical

VIEW PRODUCT Cart
AH Systems PAM-1840 High Frequency Broadband Preamplifier, 18 - 40 GHz

SKU: sku-212

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Overcome attenuation problems at higher frequencies.

Connector: 2.9mm(f) to 2.9mm(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 18 GHz - 40 GHz

Gain: 20 dB typical (15 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: +6 dBm @ 1 dB compression

VSWR: less than 1.7:1 typical

VIEW PRODUCT Cart
AH Systems PAM-1826 High Frequency Preamplifier, 18 - 26.5 GHz

SKU: sku-211

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

Connector: SMA(f) to SMA(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 18 GHz - 26.5 GHz

Gain: 32 dB typical

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: +6 dBm @ 1 dB compression

VSWR: 1.7:1 typical

EMC Standards: CISPR 11, CISPR 32, FCC Part 15

VIEW PRODUCT Cart
AH Systems PAM-0118P Broadband Preamplifier, 20 MHz - 18 GHz

SKU: 2669

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 18 GHz

Gain: 37 dB typical

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: + 10 dBm @ 1 dB compression

VSWR: 2.5:1 typical

Inquire for Availability

VIEW PRODUCT Cart
AH Systems PAM-0207 Preamplifier, 20 MHz - 7 GHz

SKU: 10209

Weight: 1.1 lbs. / 0.5 kg

Application/Test Type: Improve overall system sensitivity for field measurements.

Connector: N(f) to N(f)

Dimensions: 2.5" x 3.75" x 6.25" (63mm x 95mm x 158mm)

Frequency Range: 20 MHz - 7 GHz

Gain: 30 dB typical (25 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 170 mA

Maximum Continuous Power: + 3 dBm @ 1 dB compression

VSWR: 2.2:1 Input; 1.8:1 Output

VIEW PRODUCT Cart
Teseq LNA 6018 Low Noise Amplifier 1 GHz to 18 GHz

SKU: sku-83

Weight: 220 grams (0.3 Lbs)

Application/Test Type: Significantly increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments

Connector: IN: SMA female 50 Ohms; OUT: SMA male 50 Ohms

Dimensions: 39 mm x 88 mm x 36 mm

Frequency Range: 1 GHz - 18 GHz

Gain: 22 dB typical (± 3 dB flatness)

Input: less than -10 dBm

VSWR: less than 2:1 typical

VIEW PRODUCT Cart
Teseq LNA 6900 Low Noise Amplifier 9 kHz to 2 GHz

SKU: sku-81

Weight: 0.27 Lb's (127 grams)

Connector: N-type 50 Ohms

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range); 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: Greater than 12.5 dBm @ 1 dB compression

VSWR: less than 1.5:1

VIEW PRODUCT
AH Systems PAM-0202 High Gain Preamplifier, 20 MHz - 2 GHz

SKU: 3727

Application/Test Type: EMI Precompliance Testing Emissions Measurements, CE Marking

Connector: N(f) to N(f)

Frequency Range: 20 MHz - 2000 MHz

Gain: 30.4 dB typical (29.5 dB minimum)

Input: 100/220 VAC regulated P/S output: 12 VDC 140 mA

Maximum Continuous Power: + 6 dBm @ 1 dB compression

VSWR: 1.5:1 Input; 1.8:1 Output

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$149.00 - $1,250.00

Typically In Stock

ORDERING OPTIONS
PA2500M Low Noise Amplifier, 1 - 2500 MHz

SKU: 18371

Weight: 1.45 lbs (2.5 lbs with Internal Battery)

Applications: EMI Precompliance Testing, Emissions Measurements, CE Marking

Connector: N(f) to N(f) (Inquire for SMA or BNC)

Dimensions: 4.25" x 2.31" x 6.73"

Frequency Range: 1 MHz - 2500 MHz

Gain: 31.5 dB typical (30 dB minimum)

Input: 120 VAC regulated P/S or 12 VDC Battery

Maximum Continuous Power: + 20 dBm @ 1 dB compression

VSWR: 2:1 Max

Test Standards: CISPR 11, CISPR 32, FCC Part 15

Cost New:

Was:

Price Now:

$1,395.00 - $1,695.00

In Stock

ORDERING OPTIONS
Teseq LNA 6000 Low Noise Amplifier 1 MHz to 3 GHz

SKU: sku-80

Weight: approx. 127 grams (0.3 Lb's)

Application/Test Type: Increase the sensitivity of virtually all spectrum analyzers and other RF measuring instruments.

Dimensions: 28 mm x 95 mm x 27 mm

Frequency Range: 1 MHz to 3 GHz (nominal range) 200 kHz to 4 GHz (utilizable range)

Gain: 12.5 dB (±0.3 dB flatness)

Input: 0 dBm (107 dBμV)

Maximum Continuous Power: 12.5 dBm @ 1 dB compression

RF Connector: IN: N-type (f); OUT: N-type (m)

Inquire for Availability

VIEW PRODUCT Cart